Hi Paul,
ok my amandapass looks like yours, so this can not be the problem. I
think the problem is that the user amanda couldn´t reach the magnus,
´cause the error message is
Amanda Backup Client Hosts Check
ERROR: technix.kn.ordix.de: [can not access
[EMAIL PROTECTED] (Alexandre Oliva) writes:
On Oct 27, 2000, Joe Rhett [EMAIL PROTECTED] wrote:
So I'm left to ask -- what is holding up release?
AFAIK, it's just documentation.
[...]
Basically, someone has to go over all the existing documentation, see
if it still applies to the
Hi Michael,
You didn't configure amanda with samba support on technix.kn.ordix.de.
You should reconfigure it.
Jean-Louis
On Mon, Oct 30, 2000 at 08:55:20AM +0100, Michael Lindermann wrote:
Hi Paul,
ok my amandapass looks like yours, so this can not be the problem. I
think the problem is
/amanda...
20001027: found non-empty Amanda directory.
Flushing dumps in 20001027,
today: 20001030
to tape drive /dev/rmt/0cbn.
Expecting a new tape. (The last dumps were to tape daily555)
Are you sure you want to do this? y
driver: send-cmd time 0.020 to taper: START-TAPER 20001030
taper: pid
Title: RE: Something very strange with amcheck -c (very long, sorry)
I won't claim to be an AMANDA expert (just a satisfied user), but I seem to remember that there only needs to be one amandad on each client, and there should only be one amandad in memory on any one client machine.
I
Why is it that when I first run amcheck, it does not itself create the
needed directories and files. Do I really need to do that each time a new
disk appears on the network? I thought this was more automated than
that...or am I missing something? I'm using 2.4.2b2 on Solaris 7 with
Mammoth
While I generated these, I ran a little monitoring script ...
and it shows clearly that 15 amandads and 3 client selfchecks are running.
At the same time??? As Paul said, that would be bad. There should only
ever be one amandad running on a client at one time. The first thing
I would check is
I have a DDS changer, 12 slot. Amanda.conf names changer as changer file.
changer.conf lists starttape 1, endtape 12, cleancart 12...
Where do I look?
Version etc is in the stdout:
I started with slot 7 loaded, and then instead of moving to slot 8, it
moves back to slot 1. Mtx moves thru
I've successfully run Amanda on many different platforms and thought I had
the above platform working fine. Its been doing backups for almost a year.
Needed to restore some files only to find that somehow the files are
corrupt. For example a 46MB file restores as a 36MB file.
No indication of
