Hello Tony,
This is what I have in my DOPPLER.SQF file:
FUNCUBE-1 (AO-73),145936.58,0,USB,USB,NOR,0,0,TLM
FUNCUBE-1 (AO-73),145958.3,435147.78,USB,LSB,REV,0,0,SSB transponder
The first frequency is the downlink and should be USB. The second
frequency is the uplink and should be LSB.
73,
Anthony,
Here is a copy and paste from the manual.
· The name of the satellite
·The receive- and transmit frequencies in kHz
·The Up- and Downlink modes
·The frequency trend of the satellite (normal or reverse)
·The converter and transverter offset
FYI, with AO-73 you are going to need to keep adjusting manually also.
Dave-KB1PVH
Sent from my Verizon Wireless Droid RAZR
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the
Marc,
Have you set up the satellite priorities?
? at the top | Auxiliary Files | PRIOR.SQF
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Marc Tessier - VE3TES
Sent: Monday, May 12, 2014 4:10 PM
To:
John,
I don't remember whether that is in 12.8B, but look at the Mode command. If it
is not there, it is
definitely in 12.8C, a free and easy update.
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of John / NS1Z
John NS1Z,
Click on MODE
Then select radio button for Freq. at Satellite
73
Rolf NR0T
Grid EN34
Amsat #38889
On Mon, May 12, 2014 at 7:07 AM, John / NS1Z ns1zj...@gmail.com wrote:
I left out one little detail...
I have SatPC32 12.8.B running and I would like to change the freq display
Keith,
I changed the subject to the actual name of the program. It will help people
find it who can help.
Which satellites have you tried? What is the program that works? 32 or 64
bit WIN7?
Are you using a USB serial port? Which chip set? Have you tried increasing
the CAT delay
I am using a prolific usb to serial port converter which uses a 64 bit driver.
The other control program that I have tried for the rig is ARCS 2, but of
course, doppler shift is not a function of this program, but it doed refresh
the frequency display, both by the program, and manual turning of
-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Keith McDonnell
Sent: Friday, May 02, 2014 8:12 AM
To: amsat-bb@amsat.org
Subject: [amsat-bb] Re: satpc32 Doppler
I am using a prolific usb to serial port converter which uses
a 64 bit driver. The other control program that I have
I know this is super-basic, but did you click on the C- (turning it to
C+) in the upper left portion of the program window to enable computer
control of the radio?
George, KA3HSW
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of
Suggest you email Erich and ask him
erich.eichm...@t-online.de
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Gabriel - EA6VQ
Sent: Friday, February 7, 2014 11:22 AM
To: amsat-bb@amsat.org
Subject: [amsat-bb] SatPC32 CAT with IC-9100
Gabriel,
I have the same setup and it works perfect. Email me direct and we can go
over settings if you want to
Dave-KB1PVH
Sent from my Verizon Wireless Droid RAZR
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an
Hi Scott,
I have one of the LVB trackers I purchased from Amsat UK before Amsat NA
sold them. I built the unit with serial option and use a usb to serial
adapter for over 5 years with no problem. I would recommend this option.
73 de Angelo
- Original Message -
From: Scott Smith
My recent acquisition of a new LVB Tracker came with serial only, not
the USB option. At first I thought this might be an issue but quickly
found that you can buy a nice FTDI USB to serial cable for around $15
online. It is a very clean solution. I was told that the USB option
had given some
Problem fixed after talking with Jan PE0SAT (thanks Jan!)
Need to use a newer version of SDR Sharp:
- version 'stable' (v1.0.0.1000) does not work well with the DDE
- version 'dev' (rev 1173) does work !
Henk, PA3GUO
-Oorspronkelijk bericht-
Van: PA3GUO [mailto:pa3...@upcmail.nl]
Hi Henk,
You're welcome, have fun with this combination, it is working great for
me.
@All I updated the article on my blog with this new information.
http://www.pe0sat.vgnet.nl/2013/new-sdr-dde-plugin/
73 Jan PE0SAT
On 04-01-2014 18:31, PA3GUO wrote:
Problem fixed after talking with Jan
Thank you both for publishing this info! It will be great to use SatPC32
with SDR#!
On Sat, Jan 4, 2014 at 1:06 PM, PE0SAT | Amateur Radio pe0...@vgnet.nlwrote:
Hi Henk,
You're welcome, have fun with this combination, it is working great for me.
@All I updated the article on my blog with
Peter,
Check that you are using the same Observer position and source file in both
programs.
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Peter Wilson
Sent: Monday, December 30, 2013 2:43 PM
To:
Peter,
Call??
What rotator interface are you using?
Do you have your desired satellites set in the PRIOR.SQF file?
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Peter Wilson
Sent: Friday, December 20, 2013 2:49
Hi Ted,
I do not have an FT-847 handy to test, but here is some information.
The TX/RX buttons have been moved. At the very bottom line, Obs, Config, etc,
hover your mouse. You
will get a message to Double click to activate/deactivate RX/TX buttons.
They will appear in the
corners of the
: [amsat-bb] Re: SatPC32 ISS help needed
Hi Ted,
I do not have an FT-847 handy to test, but here is some information.
The TX/RX buttons have been moved. At the very bottom line, Obs, Config,
etc, hover your mouse. You will get a message to Double click to
activate/deactivate RX/TX buttons
Rich,
What do you have selected as the Diverse Source File?
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Rich/wa4bue
Sent: Tuesday, December 10, 2013 5:02 AM
To: Dave Webb KB1PVH; AMSAT -BB
Subject: [amsat-bb]
Alan,
I think he followed Erich's instructions the other day, which would pit it
in the tle-new source file.
Dave-KB1PVH
Sent from my Verizon Wireless Droid RAZR
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an
...@gmail.com
To: 'AMSAT -BB' amsat-bb@amsat.org
Sent: Tuesday, December 10, 2013 8:50 AM
Subject: [amsat-bb] Re: SATPC32 KEPS in Groups
Rich,
What do you have selected as the Diverse Source File?
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun
Cc: AMSAT -BB
Subject: Re: [amsat-bb] Re: SATPC32 KEPS in Groups
Alan,
I think he followed Erich's instructions the other day, which
would pit it in the tle-new source file.
Dave-KB1PVH
Sent from my Verizon Wireless Droid RAZR
___
Sent via AMSAT
I followed Erich's instructions as posted by Stefan I believe and I could
not see A0-73 appear in the list of Sats. Has anyone else figured out how
to get SatPC32 set up for this wonderful new bird?
Rick
W2JAZ
___
Sent via AMSAT-BB@amsat.org. Opinions
--
*From:* Richard Lawn rjl...@gmail.com
*To:* Amsat BB amsat-bb@amsat.org
*Sent:* Saturday, November 23, 2013 5:10 PM
*Subject:* [amsat-bb] Re: SatPC32
I followed Erich's instructions as posted by Stefan I believe and I could
not see A0-73 appear in the list
followed the instructions as posted and it worked perfectly.
73, Adrian AA5UK
From: Richard Lawn rjl...@gmail.com
To: Amsat BB amsat-bb@amsat.org
Sent: Saturday, November 23, 2013 5:10 PM
Subject: [amsat-bb] Re: SatPC32
I followed Erich's instructions
Rob,
FUNCUBE-1
1 1U 13999A 13325.30956308 -.0106 0-0 0 0 118
2 1 97.7956 38.2570 0059925 198.5190 336.5388 14.7784139415
FUNCUBE-1,145934.0,,USBTLM
FUNCUBE-1,145960.0,435140.0,USB,LSB,REV,,, Transponder
73s,
Alan
WA4SCA
PS
If you want to get a jump on
Hello Dick,
I'm sorry about the German error messages in ServerSdx.exe. I have uploaded
a file with Englisch messages. It can be downloaded here:
http://www.dk1tb.de/ServerSdx.exe
Copy the downloaded file into the sub folder SDX of the SatPC32 program
folder (usually C:\Program Files\SatPC32)
Hello Carl,
set the Icom addresses in the menu Radio Setup. Click on the little
control right hand of the word Model. In the list that opens choose
Addresses. The first Icom address pair will be displayed in the address
window. With the up/down controls set the address values. If you use a
Carl,
I don't use Icoms now, but I tried configuring for one. Everything worked
fine, and the values I set
were retained when I restarted the program. There is an additional Addresses
OK button to the left
which I needed to click, in addition to the usual Store.
73s,
Alan
WA4SCA
Carl,
Perhaps someone with first hand experience will have a suggestion.
73s,
Alan
WA4SCA
-Original Message-
From: carl creamer [mailto:ccre...@pacbell.net]
Sent: Sunday, September 29, 2013 5:00 PM
To: apbid...@mailaps.org
Subject: Re: [amsat-bb] Satpc32 Storing Rx/Tx addreses
Mike,
You are most likely right about the cause. I will check with the folks doing
the rebuild about the
duration. Thanks for reporting this.
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org
[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Mike Seguin
Sent:
Tnx Alan. It's a pretty simple change to Celestrak.SQF in SatPC32 to get
back on track.
Mike
On 9/27/2013 8:41 AM, Alan wrote:
Mike,
You are most likely right about the cause. I will check with the folks doing
the rebuild about the
duration. Thanks for reporting this.
73s,
Alan
WA4SCA
: Friday, September 27, 2013 8:45 AM
To: 'AMSAT BB'
Subject: [amsat-bb] Re: SATPC32 - amsat keps
Tnx Alan. It's a pretty simple change to Celestrak.SQF in SatPC32 to get
back on track.
Mike
On 9/27/2013 8:41 AM, Alan wrote:
Mike,
You are most likely right about the cause. I will check
Anyone using the PocketSat3 App for Iphone etc.., will likely have to do the
same thing.
Import Data Edit - Tap AMSAT.org's Keps (do not tap the Red X)
- Tap the URL Field, Change WWW to WW2 in the URL Field - Tap Done x2
then try the Import Data feature again.
Ryan / N9SOX
On 9/27/2013 6:58 AM, Mike Seguin wrote:
Is this a permanent change? Maybe this was in response to the rebuild
post hack?
ww2 addresses are all temporary. For the last couple of weeks, keps
have been served from the future home server of www.amsat.org.
I have turned off the redirect
Carl,
According to the records, you ordered it late Thursday evening. As you know,
we have a tiny (1)
office staff, and the program registration process is done manually rather than
automagically. It
sometimes take a few days to process, depending on many issues. This is
mentioned on the
To All - The date on the PayPal form I downloaded today was Saturday, Sept
21. I sent the password to Carl around 30 minutes ago. One day turn
around for a 1 person office is pretty good!
On Mon, Sep 23, 2013 at 4:20 PM, Alan wa4...@gmail.com wrote:
Carl,
According to the records, you
Hi Les,
You have to configure/check the SubTone.sqf file and then when this is
setup
you can use the T0/T1/T2 option within SatPC32. Default behaviour is T0
no tone
T1 is normal TX behaviour and T2 arm the SO-50 timer.
Here some information from the SatPC32 Manual:
Hello Les,
with the settings that come with the SatPC32 12.8b setup file you can switch
on the 67.0 Hz and the 74.4 Hz sub tones
of the IC-910H. While tracking SO-50 click the SatPC32 T control (in the
uppler left part of the SatPC32 main window) to T1. That will switch on
the 67.0 tone.
Yesterday I wrote:
It just occurred to me that I can use direct serial port commands to the ST2
to test that the azimuth rotor moves CCW from, say, 175 deg to 185 deg, and
does not try to go CW through the rotor stops. Repeating with SatPC32
interface should verify I have the azimuth stops
: [amsat-bb] Re: SatPC32 using flip mode at AOS
Yesterday I wrote:
It just occurred to me that I can use direct serial port commands to the
ST2 to test that the azimuth rotor moves CCW from, say, 175 deg to 185
deg, and does not try to go CW through the rotor stops. Repeating with
SatPC32
I sometimes use the R I T to tweak the receive on each pass. Set it at the
beginning of the pass and it usually stays right through the whole thing. I do
wish the 910 had a little more range on the RIT.
73, Drew KO4MA
Sent from my iPhone
On May 8, 2013, at 2:45 PM, Bob- W7LRD
Bob
VO-52 seems to have a different offset per pass, but usually stays constant
for the pass, AO7 likewise.
I calibrate when the pass starts by using XIT and usually it stays constant
for the whole pass.
That being said, the last 2 VO-52 passes I was on this week, calibration did
change during
Bob,
Take a look at the orbit.
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Bob- W7LRD
Sent: Sunday, April 28, 2013 12:34 AM
To: amsat-bb@amsat.org
Subject: [amsat-bb] satpc32 etc
Thanks to many and Dave KB1PVH I
yep a low orbit for that block of aluminum . I was Googleing around trying to
find out when and where it will deorbit. Will not that much mass make land
fall? It would probably create a meteor like trail. Maybe our meteor scatter
folks could make some use of that 8,377 block of aluminum.
73
Date: Sun, 28 Apr 2013 18:44:33 +
From: w7...@comcast.net
To: apbid...@mailaps.org
CC: amsat-bb@amsat.org
Subject: [amsat-bb] Re: satpc32 etc
yep a low orbit for that block of aluminum . I was Googleing around trying to
find out when and where it will deorbit. Will not that much mass make
Hello Les,
regarding question 1 read the tutorial by Wayne Estes, W9AE:
http://www.dk1tb.de/W9AE_Tutorial.htm
and the FAQs file on my website
http://www.dk1tb.de/FAQ_e.htm#NewSat
73s, Erich, DK1TB
Am 26.04.2013 10:03, schrieb Les Rayburn:
Like many, I'm eager to track the new satellites
Stephen,
Thank your the advice on how to improve my satellite operation. Much
appreciated, and exactly what I was hoping for when I posted the questions
to the AMSAT BB. Tried it last night on a pass with mixed results. But
I think I understand the principle now.
I'll also look for you on
Sometimes the offset in the transponder changes slightly. This is especially
true with VO-52 and AO-7. On these sats, I use the RIT to touch up and make
sure I can hear my self plainly at the beginning of a pass. This is a little
easier than the offset feature in the software.
I hope that
Les,
Here is the procedure I've used with SatPC32 and my Icom IC-821 for
Doppler correction when operating SSB. It should work with any rig that
is CAT controlled. (This is a corrected version of something I wrote a
couple of years ago in response to a similar question.)
Your success operating
Les
Steve,N9IP gave a very good tutorial on how to set up. The one thing
that he said that took me a while to figure out was to make sure you get a
nice clean path to adjust your uplink. You see we are coming to the time of
year that the tree's are filling up with water and if your pointing
Just found the patch Tom mentioned is now on the WWW.DK1TB.DE site.
73s and thanks to Erich,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Tom Deeble - KA6SIP
Sent: Tuesday, March 12, 2013 12:30 PM
To:
Tom,
Congratulations on the local detective work. Thanks for posting this, and as
always, to Erich for his remarkable level of support!
73s,
Alan
WA4SCA
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On
Behalf Of Tom Deeble - KA6SIP
Sent:
Rick,
the current SatPC32 version still uses the old MSComm32.OCX component to
manage the serial ports. The component supports only the port numbers 1 to
16. (It is possible to expand the numbers up to 255 by changing a single
byte in the binaray code of the component. However, I don't know
Rick,
unzip the dowloaded setup file into an empty folder. In that folder
RIGHTclick on the file name setup. From the list that opens choose Run as
administrator. That is necessary even if your are logged in as
administrator (see Read this... text on the page Downloads of my
website).
73s,
Hello Dick,
the special program version for in-band operation over the ISS -
SatPC32ISS - unfortunately doesn't support the FT-817 (see SatPC32ISS
menu ?, SatPC32ISS).
So, try the normal SatPC32. Make sure that the FT-817 display shows VFOa.
If it displays VFOb click button A below the display to
Hi Dave. I operate my 9100 with SatPC32 with no problem's at all. It you need
any help setting it up let me know, I can also send you my config files.
73 Jeff kb2m
- Original Message -
From: n4csi...@bellsouth.net
To: amsat-bb@amsat.org
Sent: Wed, 03 Oct 2012 16:45:34 - (UTC)
Bob,
When you start WINAOS, make sure it's using the SAME keps file as in
SatPC32. You have to choose it in both programs
Mark N8MH
On Tue, Sep 25, 2012 at 2:37 PM, Bob- W7LRD w7...@comcast.net wrote:
the aos in winaos program is about 12 min. before the actual aos. Being
slightly
Kelly,
Take a look in the Setup menu under Configurations. You can set up 4 different
radio setups which allows you to set up which ever radio you want as your TX
and RX radio. Then you add only the satellites that you want to use for that
particular configuration.
I have mine setup so I am
Hello Kelley,
to steer both radios you only need a single COM port and a single CAT
interface or CAT cable with - for example - an y-adapter.
In menu Radio Setup , Radio 1 section, choose Icom for brand and the
IC-706MKIIG for model. Set the CAT baudrate to 19200, do the same at the
radios.
In
Thanks all for your help on this issue. I think with that help I've got
it figured out.
Thanks again,
Kelley - WØRK
On 7/22/2012 9:28 AM, Kelley wrote:
Satellite newby here, trying to setup a station...
For all you SatPC32 users, a question. I'm using the software with 2
radios. One is an
What rotor interface are you using?
Jim KQ6EA
On 07/14/2012 12:02 AM, Matt Severin wrote:
While working with the 8 teachers at Teachers' Institute II, I had a
variety of computer operating systems. We had some odd behavior with the
Win7 machines, but I am not sure if this was a fluke or a
A Sat688 rotor interface.
Matt
On Fri, Jul 13, 2012 at 9:13 PM, Jim Jerzycke kq...@verizon.net wrote:
What rotor interface are you using?
Jim KQ6EA
On 07/14/2012 12:02 AM, Matt Severin wrote:
While working with the 8 teachers at Teachers' Institute II, I had a
variety of computer
Hi Tony,
I think I have a possible solution. I am able to reproduce your situation
by doing the opposite of my suggestion below. See if this fixes it. If
not, maybe someone else can pin it down for you.
Go to 'Satellites' in the menu bar and check the list of satellites in
the 'selected
Website says it's 100% Yaesu GS-232A compatible, so I would suggest selecting
the Yaesu_GS-232 option is SatPC32 Rotor setup and see how that flies. Be sure
to read follow Erich's tips under ?, Hints [Rotor], Yaesu_GS232.
George, KA3HSW
- Original Message
From: Fraser Bonnett
Nevermind, I finally was faster than the error dialog box.
Dave - KB1PVH
Sent from my Verizon Wireless DROID X
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur
Ted,
Are you using SATPC32ISS? The rig is not capable of operating full duplex
on the same band, so if you want to work the ISS on those frequencies, you
need to use the special version. The SATPC32ISS does tune both the uplink
and downlink, but not as full duplex. More like a standard
Most rigs will not let you used same band on two vfos. Erich has developed
another version of SATPC32 called SATPC32ISS which accommodates
this issue. Check your program/satpc32 folder for SATPC32ISS.
73 de Angelo / N5UXT
-
John,
Thanks for mentioning this. I had missed his update. This makes SATPC32
unique in providing this support.
There is an article in the July/August 2010 issue of the AMSAT Journal
called Bringing the One True Rule of Doppler Tuning into the 21st Century.
It explains in some detail the
Hi Erich, DK1TB
Congratulations for your new implementation into
SatPC32 V12.8b
It is really a great job seeing the frequency we are
on at the satellite receiver !
73 de
i8CVS Domenico
- Original Message -
From: John Papay j...@papays.com
To: amsat-bb@amsat.org
Sent: Friday, March 23,
I renamed the kep file and restarted satpc32 It then ask for a new file and
I pointed to the previous file that worked before. At this point as soon as
I say ok the program goes into a loop and I no longer have any control to do
anything. The only way out is a reboot. What do I do next??
nick
Nick,
Did you happen to use the backup utility that comes with SatPC32?
That has saved me a number of times. I try to run it every couple of
weeks, when things are running smoothly.
Then, it's a restore from the same utility, to get things back to normal.
Otherwise, you'll have to try
Backup fix it
Thanks Mark et all
nick
-Original Message-
From: Mark L. Hammond [mailto:marklhamm...@gmail.com]
Sent: Tuesday, March 13, 2012 7:04 AM
To: Nick Pugh
Cc: amsat-bb@amsat.org
Subject: Re: [amsat-bb] Re: satpc32 help
Nick,
Did you happen to use the backup utility that comes
I'll take a shot at this:
You can, by SatPC32 settings, limit the movement to 90 deg elevation.
That will prevent what many of us call 180 flip mode or some
variant.
Now to limit to 85 deg?? I bet if you use a setting of either time
interval (increase it...) or Position change (increase it)
Here's what I do, it works for me for any off-screen windows:
* Click on the taskbar to make sure your off-screen window is selected.
* HIt Alt-Space to bring up the window minimize/maximize/close/move dialog.
* Choose Move.
* Hit any arrow key (important - this starts the move process).
*
; amsat-bb amsat-bb@amsat.org
Sent: Saturday, October 22, 2011 4:36 AM
Subject: Re: [amsat-bb] Re: SatPC32 version 12.8b is released
i think i have a bunch of ao40 qso's on my website.
http://www.amsatnet.com/audio.html
problem is you are dreaming of reliving a time in history when we were
- Original Message -
From: Wayne Estes w...@charter.net
To: amsat-bb@amsat.org
Sent: Friday, October 21, 2011 9:27 AM
Subject: [amsat-bb] SatPC32 version 12.8b is released
SatPC32 version 12.8b is available for download at
http://www.dk1tb.de/downloadeng.htm
Thanks Wayne,
I appreciate the heads up. Downloaded the file (used the backup utility)
then upgraded (from a to b) in a couple minutes including the restoring of
the configuration.
73 de Jeff
K2AK
DM41
-Original Message-
From: amsat-bb-boun...@amsat.org
--
-Original Message-
From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf
Of i8cvs
Sent: Friday, October 21, 2011 8:10 AM
To: Wayne Estes; Amsat - BBs
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
- Original Message -
From: Wayne Estes w...@charter.net
I did the backup/upgrade without a problem. The additional
information on the main screen looks helpful. Thanks, Erich!
One observation about upgrading from a prior version---when you
restore the data, on the Programs Menu you will lose the new
additions of the links to the DataBackup (and
Wayne,
A question everyone will ask me now that this new version is
available.. Do I have to pay for the upgrade? I purchased
SATPC32 from an AMSAT rep at a flea market and it didn't come
with a code to be put in to make it work... When I run the
program-it says registered and is fully
morse...@optonline.net
To: Wayne Estes w...@charter.net; amsat-bb@amsat.org
Sent: Fri, October 21, 2011 10:51:40 AM
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Wayne,
A question everyone will ask me now that this new version is
available.. Do I have to pay for the upgrade? I
On 10/21/2011 9:09 AM, George Henry wrote:
The registration code can be found on the 4th line of the file UserDaten.txt,
either in c:\documents and settings\owner\application data\SatPC32 (XP) or
c:\Users\owner\AppData\Roaming\SatPC32 (Vista/Win7) where owner is your
username.
W9AE replies:
...@amsat.org] On
Behalf Of Dee
Sent: Friday, October 21, 2011 10:52 AM
To: 'Wayne Estes'; amsat-bb@amsat.org
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Wayne,
A question everyone will ask me now that this new version is
available.. Do I have to pay for the upgrade? I purchased
Domenico...If you have a problem with AMSAT-NA, please donate to whoever is
bending to your desires the most, and save the rest of us the pain of your
posts!
-Original Message-
From: i8cvs
Sent: Friday, October 21, 2011 08:09
To: Wayne Estes ; Amsat - BBs
Subject: [amsat-bb] Re
There are no stupid questioms, only answers.
From: arsk...@gmail.com
To: domenico.i8...@tin.it; w...@charter.net; amsat-bb@amsat.org
Date: Fri, 21 Oct 2011 14:23:45 -0400
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Domenico...If you have a problem with AMSAT-NA, please
WA4SCA wrote:
You can run the update on a registered version, and it will be registered.
A good idea to put the registration info in a safe place, just in case,
though Martha can generate it for you.
W9AE replies:
I had to re-enter my registration code when upgrading from 12.8a to 12.8b.
-bb@amsat.org
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
WA4SCA wrote:
You can run the update on a registered version, and it will be registered.
A good idea to put the registration info in a safe place, just in case,
though Martha can generate it for you.
W9AE replies:
I had to re
I used data restore and it used the backup info! No need to reenter here going
from a to b.
-Original Message-
From: Wayne Estes w...@charter.net
Sent: October 21, 2011 3:24 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
WA4SCA wrote:
You can
...If you have a problem with AMSAT-NA, please donate to whoever is
bending to your desires the most, and save the rest of us the pain of your
posts!
-Original Message- From: i8cvs
Sent: Friday, October 21, 2011 08:09
To: Wayne Estes ; Amsat - BBs
Subject: [amsat-bb] Re: SatPC32 version
CC: w...@charter.net; amsat-bb@amsat.org
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Thank you
I am so sick and tired of bashing the cubesat community. At least they
are putting satellites in orbit and they ARE licensed radio amateurs
with the same access to the spectrum
for them, as you say.
But, have you ever worked a HEO? If not, you have missed a lot.
De Peter, NH6VB
Date: Fri, 21 Oct 2011 15:17:03 -0500
From: wagen...@gmail.com
To: arsk...@gmail.com
CC: w...@charter.net; amsat-bb@amsat.org
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Thank
; amsat-bb amsat-bb@amsat.org
Sent: Friday, October 21, 2011 11:25 PM
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Thanks,
I am glad you favour HEOs. Good for you. At least the cubesat
community does not bash and discriminate against your favourite
satellite system. Any university
Domenico
- Original Message -
From: Stefan Wagener wagen...@gmail.com
To: nh6vb Scheller nh...@msn.com
Cc: w...@charter.net; amsat-bb amsat-bb@amsat.org
Sent: Friday, October 21, 2011 11:25 PM
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Thanks,
I am glad you favour
: i8cvs
Sent: Friday, October 21, 2011 21:54
To: AMSAT-BB ; nh6vb Scheller ; Stefan Wagener
Cc: w...@charter.net
Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
Hi Peter,NH6VB
I believe that Stefan,VE4NSA never worked or was listening
on a HEO othervise he will be not in favour only
, 2011 4:35 AM
Subject: Re: [amsat-bb] Re: SatPC32 version 12.8b is released
Now I understand!
Why should we support AMSAT. I already have a cell phone. I could give you
my number. We could set up a conference call. Everyone can talk and listen
...worldwideand interrupt each other
- Original Message -
From: Bruce kk...@amsat.org
To: i8cvs domenico.i8...@tin.it; amsat-bb amsat-bb@amsat.org
Sent: Saturday, October 22, 2011 4:36 AM
Subject: Re: [amsat-bb] Re: SatPC32 version 12.8b is released
i think i have a bunch of ao40 qso's on my website.
http://www.amsatnet.com/audio.html
1 - 100 of 228 matches
Mail list logo
