-= On Sun, 21 Sep 2003 14:43:47 -0700, Mark Hagler [EMAIL PROTECTED] said:
Hi,
Anybody have lots of experience with PCI ISDN cards and Asterisk? I'm
thinking of getting a BRI in my house to deliver more advanced signaling to
my PBX (yes, I'm a geek :-)) but I've never played with
I have a normal backup phone (and an alarm panel) sharing the POTS
line with the Digium X101P FXO:
|
|
Wall |---+--X101P FXO as Zap/5
||
|Phone Alarm
Whenever the Phone is used, Asterisk sees a 'false ring' signal
immediately when the phone is hung up.
The Alarm
-= On Sat, 20 Sep 2003 10:51:06 -0500 (CDT), Mark Spencer [EMAIL PROTECTED] said:
Try increasing PEGCOUNT in wcfxo.c. You'll have to do a make
install in zaptel, unload, and reload wcfxo:
Thanks for the fix! I set PEGCOUNT to 10 and did a few successful
tests without false rings -- looks
-= On Thu, 18 Sep 2003 23:32:07 -0400, Sean Rodger [EMAIL PROTECTED] said:
There seems to be a problem with the (not my) TDM400P hardware.
Here is the origional problem:
Sometimes there is a clean dialtone.
Sometimes there is a loud crackling sound over the dialtone.
I just recently
-= On Fri, 19 Sep 2003 15:39:44 -0500, PJ Welsh [EMAIL PROTECTED] said:
I am about to try our TDM400P E model from the developer kit (not
the Lite) we just got and noticed a large number of reported
problems. I had the CVS from Sep 12 (or so the CVS/Entries file has
in it). My drivers seem to
Does anyone have a recent build of gastman for Win32 that they would
be willing to post or email? (I can host it if you want to share.)
The newest version I can find is here:
ftp://ftp.digium.com/pub/gastman/
It's a year old, and crashes (Illegal Instruction) on most events.
Does anyone have
-= On Wed, 17 Sep 2003 11:29:07, Shaun Ewing [EMAIL PROTECTED] said:
MoH works fine with my (local) Grandstream phones. It's just the
direct-dialed music-only extension that does not. [...]
Try something like
exten = 6000,1,Answer
exten = 6000,2,MusicOnHold
Yes! You got it. That fixes
-= On Wed, 17 Sep 2003 11:01:34 -0600, Rich Adamson [EMAIL PROTECTED] said:
Examples,
Where should I have learned that *8# is the call pickup dialing sequence?
A good question. I didn't know about any of them until James Sizemore
posted this handy list on Sept.8:
*0# sends flash
*8# remote
-= On 15 Sep 2003 11:09:38 -0600, tom [EMAIL PROTECTED] said:
And interestingly, the Digium card looks a lot like a product sold
by Tigerjet, called the Personal Phone Gateway. I'm purely
speculating on this, but Digium could have used Tigerjet's reference
design for their own board.
That's
I'm a newbie, not afraid to admit it. I tried to install my TDM400P
without the auxilliary (drive) power connection and got this failure
when loading the wcfxs module:
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 failed to powerup within 510 ms
Unable to
[ Sorry, I incorrectly copied some Reference headers into this post
and tacked it onto the wrong thread. -Steve ]
So far, I have been able to receive incoming iaxtel calls via my
assigned 1-700-xxx- number, but only when using md5
authentication in iax.conf:
[iaxtel]
type=user
-= On Sun, 14 Sep 2003 07:25:42 -0600, Rich Adamson [EMAIL PROTECTED] said:
1. music on hold does not require any exten = 302,1,... commands
at all. Once moh is defined in the musiconhold.conf file, it seems
to work on all extentions without additional per-extension
definitions.
Thanks for
-= On Mon, 15 Sep 2003 11:42:18 +0200, Jean-Marc V. Liotier [EMAIL PROTECTED]
said:
Having ISDN FXOs and a bunch of ISDN DECT base stations, I went
looking for a CAPI compatible active BRI adapter capable of NT
mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses
I have a North American BRI configured as National ISDN (NI-1) on an
SBC (Nortel?) switch. SBC calls this FastTrak ISDN, and it's
surprisingly inexpensive -- less than two POTS lines.
I've been trying to find an inexpensive PCI interface solution to
connect this to Asterisk as voice lines. I
-= On Mon, 15 Sep 2003 15:30:43 -0600, John Brown [EMAIL PROTECTED] said:
they require you to purchase 2 phones,
No, they just cost more individually: $79.99 today. Versus two for
$129.99. Domestic shipping was cheap.
and they don't carry BT-102 or AT-286 :)
True, that.
And they're off
-= On 15 Sep 2003 23:24:08 +0200, Klaus-Peter Junghanns [EMAIL PROTECTED] said:
Hi Steve,
the Eicon Diva Server BRI cards support NI-1 with capi. Some people in
.us are using them.
Thanks for the pointer! I'll try to track one down.
Unfortunately AVM only put EuroISDN into their binary
-= On Tue, 16 Sep 2003 00:07:39 +0200, Michael Koehler [EMAIL PROTECTED] said:
You get a Budgetone for free at Nikotel if you charge your account
there with 100 bucks. The nikotel service works with *, even behind
nat
I second that. The Nikotel folks have been very nice, and I did get
the
So far, I have been able to receive incoming iaxtel calls via my
assigned 1-700-xxx- number, but only when using md5
authentication in iax.conf:
[iaxtel]
type=user; Incoming calls only
context=incoming
auth=md5
secret=mysecret; Required for MD5
inkeys=iaxtel
Where
I did some searching in the archive, but found only one message with
this same question and no answer. Hopefully it's a simple config problem.
When the Caller-ID is delivered, it is surrounded by double-quotes,
like this:
ATA-57 1
On long caller-id strings, the last character is cut off to
I have the MusicOnHold feature working great when called from ATA-186
extensions. It's pretty cool.
However, when I call from a BudgeTone-100 phone, no music is heard --
instead it continues the ringing feedback and acts like the call is
unanswered. At the same time, I can call from (multiple)
-= On Tue, 2 Sep 2003, John Todd [EMAIL PROTECTED] said:
Phil -
Here are my generic notes and reminders for Asterisk on Debian.
These may be hacks; your mileage may vary.
[snip]
For what it's worth, on my own Debian (testing) machine, no changes at
all were necessary. I just did the CVS
I don't know if it's a viable option for you, but I've been having
great luck buying BRI cards from eBay. The S/T interface is much
easier to find from UK or German sellers, and since ISDN is more
common there, the prices are better, even with international shipping.
British Telecom's Speedway
-= On Sun, 24 Aug 2003 09:47:06 -0400 (EDT), John Vozza [EMAIL PROTECTED] said:
Just noticed that version 1.0.3.81 has been released on the
Grandstream website.
Doh. I see they still haven't decided to comply with RFC2616 (HTTP).
This has been a peeve since the first firmware release, but I
-= On Fri, 22 Aug 2003 06:49:53 +, WipeOut . [EMAIL PROTECTED] said:
The remote NTP problem is fixed in the current beta firmware that I
have been testing for GS.. Hopefully it will be released soon..
I'm going 'round and 'round with the GS support guys. I've tried
three beta versions of
-= On Wed, 6 Aug 2003 14:18:00 -0700, John Todd [EMAIL PROTECTED] said:
There was nothing in the FAQ that really referenced anything about
using the phone with other systems other than the IPTel-powered
platform that they apparently are using.
You might have missed this FAQ entry:
Q: I
What is the preferred way to submit feedback on the fine Asterisk
Handbook PDF? Should corrections be submitted through bugs.digium.com
somehow, emailed to the authors, or maybe posted to the dev mailing list?
Thanks,
-Steve
___
Asterisk-Users mailing
-= On Wed, 06 Aug 2003 13:38:58 -0700, George Pajari [EMAIL PROTECTED] said:
My question for the list is who will be the first to report on the
compatibility and usability of the SIPphone with Asterisk?
Well, I put in my order for the SipPhone 2-pack this morning. It
seems to be the cheapest
-= On Wed, 06 Aug 2003 14:39:53 -0500, John Schmerold [EMAIL PROTECTED] said:
I've canceled my Vonage service because of the requirement to prefix
every call with a 1.
(I was more bothered by the lack of CallerID Name, but the 11-digit
dialing was indeed annoying for local calls.)
The Vonage
-= On Thu, 07 Aug 2003 09:47:20 +0800, Steve Underwood [EMAIL PROTECTED] said:
Are they selling the Grandstream? They don't seem to actually say
A picture paints a thousand words, they say:
http://www.sipphone.com/tiki-index.php?page=Order%20Now
Hey, they just added that picture sometime
29 matches
Mail list logo
