Mojo with Horan & Company, LLC wrote:
> Sean Dennis wrote:
>> bilal ghayyad wrote:
>>
>>> Hi All;
>>>
>>> I have been chocked just when I saw some posts talking
>>> about how much the IAXy is bad :) -
>>>
>>> So I would like to ask, did any one try it later and
>>> wether it is good or not? I a
I have to chime in here to say that we have had an IAXy for four years
and it has given flawless service. Yes, it has no features like DNS
but we haven't required this. It's small and easily hidden in a home
or soho scenario and I've also used on the same network as the
asterisk box or on a network
It's not bad in the sense of stability (well the original ones are
claimed to have overheating issues..).
But its that it lacks ANY features. The IAXy has no features at all.
Also no security, it MUST be placed behind a firewall, as the
configuration doesn't have any sort of security whatsoever. D
I had a customer using an IAXY (old gen) for an FXO fax machine and it
worked almost all the time so it cannot be that bad.
Maybe because the fax was very old and did not have high transmit rates.
Thanks,
Steve Totaro
On Thu, Mar 27, 2008 at 2:11 PM, Mojo with Horan & Company, LLC
<[EMAIL PROTEC
I guess I've never run asterisk without ANY echo cans :) It's just that
the echo was minor enough that MG2 et. al did a fine job.
Thanks!
Moj
Eric Wieling wrote:
> You will never get latency on a network low enough for echo to be
> perceived as sidetone (like on analog). If you want to get r
You will never get latency on a network low enough for echo to be
perceived as sidetone (like on analog). If you want to get rid of echo
you must cancel echo.
Mojo with Horan & Company, LLC wrote:
> Sean Dennis wrote:
>> bilal ghayyad wrote:
>>
>>> Hi All;
>>>
>>> I have been chocked just wh
Sean Dennis wrote:
> bilal ghayyad wrote:
>
>> Hi All;
>>
>> I have been chocked just when I saw some posts talking
>> about how much the IAXy is bad :) -
>>
>> So I would like to ask, did any one try it later and
>> wether it is good or not? I am asking this because I
>> need to use it as it i
bilal ghayyad wrote:
> Hi All;
>
> I have been chocked just when I saw some posts talking
> about how much the IAXy is bad :) -
>
> So I would like to ask, did any one try it later and
> wether it is good or not? I am asking this because I
> need to use it as it is NAT Transparent (as I read
> als
responses inline
bilal ghayyad wrote:
> So I would like to ask, did any one try it later and
> wether it is good or not? I am asking this because I
> need to use it as it is NAT Transparent (as I read
> also, and I did not try it to see how much it is
> transparent).
Thousands and thousands and t
Hi All;
I have been chocked just when I saw some posts talking
about how much the IAXy is bad :) -
So I would like to ask, did any one try it later and
wether it is good or not? I am asking this because I
need to use it as it is NAT Transparent (as I read
also, and I did not try it to see how mu
When I make calls from my IAXy I don't hear any ringing most of the time.
I've tried using the r option on the asterisk dial application to "indicate
ringing to the calling party" but that didn't make a difference.
Anything else I can try?___
-- Bandwi
:[EMAIL PROTECTED] On Behalf Of Mojo with
Horan & Company, LLC
Sent: Wednesday, October 03, 2007 4:44 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] IAXy and hook flash transfer
When I was unable to figure out the IAXy's methods, I went with
A
iling List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] IAXy and hook flash transfer
>
> Michael Munger wrote:
>
>> In features.conf, I have uncommented the transfer features under
>>
> feature
>
>> map, but I still cannot transfer using a POTS
3:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] IAXy and hook flash transfer
Michael Munger wrote:
> In features.conf, I have uncommented the transfer features under
feature
> map, but I still cannot transfer using a POTS phone on an IAXy
a
Michael Munger wrote:
> In features.conf, I have uncommented the transfer features under feature
> map, but I still cannot transfer using a POTS phone on an IAXy adapter.
> I think I am missing something here…. Any help is appreciated.
Those features are triggered via DTMF, not using a protocol-le
On Wednesday 03 October 2007 22:21:24 Michael Munger wrote:
> In features.conf, I have uncommented the transfer features under feature
> map, but I still cannot transfer using a POTS phone on an IAXy adapter.
> I think I am missing something here Any help is appreciated.
Do you have "t" and/or
In features.conf, I have uncommented the transfer features under feature
map, but I still cannot transfer using a POTS phone on an IAXy adapter.
I think I am missing something here Any help is appreciated.
Here is features.conf:
;
; Sample Parking configuration
;
[general]
parkex
Hi Matthew -
Can any one suggest if asterisk-users is the best mailing list for questions
on Digium Iaxy (S101I) hardware, or a different one if not?
Digium support is the best resource for this. How old is the affected IAXy?
- Noah
___
--Bandwidt
lto:[EMAIL PROTECTED] Behalf Of Matthew
Yingling
Sent: Thursday, May 10, 2007 5:29 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Iaxy clicking
Hi,
I have three Iaxy devices (s101i) parts. Two of them seem to work fine.
The third plays a loud repeating click sound when an analo
What OS (operating system are you using)
Regards,
Sanjay Rajdev
- Original Message -
From: "Matthew Yingling" <[EMAIL PROTECTED]>
To: asterisk-users@lists.digium.com
Sent: Friday, May 11, 2007 2:59:01 AM (GMT+0530) Asia/Calcutta
Subject: [asterisk-users] Iaxy clicking
H
Hi,
I have three Iaxy devices (s101i) parts. Two of them seem to work fine.
The third plays a loud repeating click sound when an analog phone is plugged
in. I can provision all of them, and make calls to all of them. The
clicking one will blink when a call is incoming, but no audio from the cal
Responding to my post for searching purposes;
The fix is to manually specify disallow=all, allow=ulaw for each
device. It does not seem to work if you only include that in the globals.
Sean
Sean Kennedy wrote:
Hey all,
So I just got an iaxy to play with a few days ago. Got the config
fil
Hey all,
So I just got an iaxy to play with a few days ago. Got the config files
figured out and configured the device. I was able to make phone calls
out on it just fine. However, when trying to call the device I get a
one way audio problem ( which I would expect from sip, but not iaxy ).
Wilson Pickett wrote:
I'm thinking I have a faulty unit, but I would love to get some debug
information out of it. Can anybody give me any pointers or suggestions
on how to continue from here? I figure I'm calling digium come monday,
but I would like to have it figured out by then.
What phone
I'm thinking I have a faulty unit, but I would love to get some debug
information out of it. Can anybody give me any pointers or suggestions
on how to continue from here? I figure I'm calling digium come monday,
but I would like to have it figured out by then.
What phone are you trying to plug
So I got some iaxys in the other day. I got one of them working, the
other is having issues.
I am able to ping it, and upload a configuration file to it with a
response. Afterwards, it even registers with the asterisk server.
However, I am unable to get a dial tone, nor does the device seem
Hi all,
I followed the instructions found here:
http://www.digium.com/en/docs/S101I/Iaxy_Installation_Guide.pdf
when attempting to configure my iaxy. Sadly, it does not work. I
upload the configuration file to the correct IP address, then
unplug/plug the thing back in. I never see any re
Try This
exten => 5481,1,NoOp(${TIMESTAMP} paging Group 1 Office Page)
exten => 5481,2,DIAL(IAX2/5480/w1||)
SNIP
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http:/
I have an Iaxy that I am using to access our overhead paging system.
It is ext 5480 and required a 1 (office), 2 (Shop), or 3 (all) DTMF tone
after it answers.
If I dial 5480, I hear a tone to let me know that it is ready for the
digit.
I made an extension 5481 that using a macro and sendDTMF to
I have just purchased an IAXy and cannot get an analog telephone to work
with it. The provisioning is succesful and the asterisk server sees it
and you can call it.
Symptoms:
- network status light is on solid
- telephone status light flashes every 7 or 8 seconds
- no dialtone and no response t
- Original Message -
From: Jeff Iddings
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial
Discussion [mailto:[EMAIL PROTECTED]
Sent: Sat, 05 Aug 2006
17:36:00 -0300
Subject: Re: [asterisk-users] IAXy behind NAT, unable to
transfer?
>
> Fair enough, but m
Joshua Colp wrote:
> - Original Message -
> From: Jeff Iddings
> [mailto:[EMAIL PROTECTED]
> To: Asterisk Users Mailing List - Non-Commercial
> Discussion [mailto:[EMAIL PROTECTED]
> Sent: Sat, 05 Aug 2006
> 17:15:58 -0300
> Subject: Re: [asterisk-users] IA
- Original Message -
From: Jeff Iddings
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial
Discussion [mailto:[EMAIL PROTECTED]
Sent: Sat, 05 Aug 2006
17:15:58 -0300
Subject: Re: [asterisk-users] IAXy behind NAT, unable to
transfer?
> > On 8/5/06, Jeff I
Negative.
Moises Silva wrote:
> do you have "notransfer=no" in iax.conf iaxy entry?
>
> On 8/5/06, Jeff Iddings <[EMAIL PROTECTED]> wrote:
>> IAX Provider--> Asterisk/NAT Firewall--> IAXy (192.168.0.x)
>>
>> When a call comes into the Asterisk box, it then rings the IAXy.
>> When the IAXy is answ
do you have "notransfer=no" in iax.conf iaxy entry?
On 8/5/06, Jeff Iddings <[EMAIL PROTECTED]> wrote:
IAX Provider--> Asterisk/NAT Firewall--> IAXy (192.168.0.x)
When a call comes into the Asterisk box, it then rings the IAXy.
When the IAXy is answered, I get..
-- IAX2/homeiaxy-6 answered IAX
IAX Provider--> Asterisk/NAT Firewall--> IAXy (192.168.0.x)
When a call comes into the Asterisk box, it then rings the IAXy.
When the IAXy is answered, I get..
-- IAX2/homeiaxy-6 answered IAX2/teliax-4
-- Channel 'IAX2/teliax-4' unable to transfer
-- Channel 'IAX2/homeiaxy-6' unable to transfer
Kevin P. Fleming wrote:
Michael Wallette wrote:
My only gripe is the initial configuration, although even that isn't too
terribly bad. You must download and unpack a C program, then edit a config file
that the C program pushes to the Iaxy. If you want to change
You can do provisio
Michael Wallette wrote:
> My only gripe is the initial configuration, although even that isn't too
> terribly bad. You must download and unpack a C program, then edit a
> config file that the C program pushes to the Iaxy. If you want to change
You can do provisioning from within Asterisk, after e
Really all that? In my experience, which is admittedly only on the blue
iaxys and not the black ones, was just provision it, unplug power,
replug power. The black one I have now I haven't had to re-provision
yet so this could be so on them
Michael Wallette wrote:
If you want to change
sed an IAX softphone from
inside another RFC-1918 network to place calls through my Asterisk
server, and that worked just fine, so I suspect the Iaxy would work just
fine through double NAT as well.
--Mike Wallette
>Date: Fri, 31 Mar 2006 15:57:28 +0100
>From: WipeOut <[EMAIL PROTECTE
Kevin P. Fleming wrote:
WipeOut wrote:
To save bandwidth I would like to stay away from using the G.711
codecs.. Does the IAXY support GSM or iLBC? I couldn't find anything in
the docs..
No. The IAXy only supports G.711 ulaw/alaw and ADPCM.
I don't know what 'docs' you were looking in, but
WipeOut wrote:
> To save bandwidth I would like to stay away from using the G.711
> codecs.. Does the IAXY support GSM or iLBC? I couldn't find anything in
> the docs..
No. The IAXy only supports G.711 ulaw/alaw and ADPCM.
I don't know what 'docs' you were looking in, but this page:
http://www.
Hi..
I have to setup an extension in a remote location that will use a
cordless analog telephone.. I am looking at the IAXY to do this for
me..Basically the data path will be as follows...
[Asterisk] == (NAT) == {Internet} == (NAT) == ATA -- Handset
Since there are two NAT boxes in the path
Hi Bradley,
Yes, I experienced quite a lot of echo with my IAXy, until I switched
analog handsets - in my case, it was severe acoustic coupling in a
cheap handset.
Regards,
--
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv
in the iaxy's context, do you Answer before Dial? I think this might
remove ringing indications. I think you either Dial first, or if Answer
has to be first, add the r option to the Dial cmd?
Hope this helps :)
bails wrote:
Hi all, I have a small query regarding ringing tones on an iaxy2.
Hi all, I have a small query regarding ringing tones on an iaxy2.
I have a customer who uses an iaxy to breakout to pstn via our *.
However the customer complains that he gets no ringing tone whislt
making calls, i just visited the site and can confirm this.
I also have another customer who is
This happened to me when they had been provisioned to use a non-standard
port. back then I had to edit the iaxyprov.c or provision.c, I can't
remember, to manually specify the port I new the iaxy to be
communicating with. It had to be provisioned through that same port or
it would not respond
Hello guys
I´m facing some problems on provisioning 2 IAXy devices on our network. I
haveinstalled iaxprov and run the application on another device and it
worked first time, but when I started doing it on the other devices it
simply doesn´t work.
The device gats an Ip from DHCP server, I ge
> Is there any ATA that supports iaxy protocol and a codec different
> from g711 like gsm or g729 ??
If I understood the question, look at PA168x based ATA. I think they
support those codecs and more.
Here's a site with some info:
http://www.aussievoip.com.au/wiki-PA1688
Hello users,
Is there any ATA that supports iaxy protocol and a codec different
from g711 like gsm or g729 ??
Regards,
Loureiro.
--
Bruno de Assumpção Loureiro
msn: [EMAIL PROTECTED]
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-
k-users
>> >
>> >
>>
>>
>> ___
>> --Bandwidth and Colocation sponsored by Easynews.com --
>>
>> Asterisk-Users mailing list
>> Asterisk-Users@lists.digium.com
You will also experience this if the latency between the Asterix PABX
and IAXy is so high that echo cancel don't work.
Jan
Rich Adamson wrote:
I've got two customers on the same broadband provider. Same Asterisk box on my end.
Same CLEC.
One has an IAXy and the
> I've got two customers on the same broadband provider. Same Asterisk box on
> my end.
Same CLEC.
>
> One has an IAXy and the other has an Asterisk box with an array of devices
(Grandstream, Cisco, ATCOM, xten, etc.).
>
> The people behind the Asterisk box have had no audio quality issue
Lower speaker volume on the phone connected to IAXy.
On Mon, 2005-11-14 at 07:21 -0600, Mike Hammett wrote:
> I've got two customers on the same broadband provider. Same Asterisk
> box on my end. Same CLEC.
>
> One has an IAXy and the other has an Asterisk box with an array of
> devices (Grand
I've got two customers on the same broadband
provider. Same Asterisk box on my end. Same CLEC.
One has an IAXy and the other has an Asterisk box
with an array of devices (Grandstream, Cisco, ATCOM, xten, etc.).
The people behind the Asterisk box have had no
audio quality issues. The pe
Asterisk does not support CNG. It doesn't accept it and it doesn't
generate it. The same for the IAXy.
Try SIPura if you want a good ATA.
Grant Supp wrote:
Am I correct in assuming the iaxy (S101I) does not support comfort noise
generation (CNG)? I can tell a difference between a call placed
Am I correct in assuming the iaxy (S101I) does not support comfort noise
generation (CNG)? I can tell a difference between a call placed using a
Grandstream 486 ATA and the iaxy. With the iaxy, when the other party is
silent, the sound level abruptly cuts off to zero. This is fairly
annoying an
Here is a very strange problem I’m running into with
all of the IAXy’s we’re testing in regards to ringback when placing
an outgoing call….
First, let me describe the setup…. We have a
production Asterisk 1.0.9 box running that uses SIP trunks to connect to various
Cisco voice gateways.
The file used with a Digium IAXy device: "iax.conf"
has the line: "port=5036" (I also use the "bindaddr=192.168.1.91" entry)
but when Asterisk talks to the IAXy device it
used port 4569 (from "tcpdump"). How are the port numbers assigned?
What tells the IAXy which port to use. The IAXy provisionin
The file used with a Digium IAXy device: "iax.conf"
has the line: "port=5036" (I also use the "bindaddr=192.168.1.91" entry)
but when Asterisk talks to the IAXy device it
used port 4569 (from "tcpdump"). How are the port numbers assigned?
What tells the IAXy which port to use. The IAXy provisionin
On Thu, September 8, 2005 0:11, Jimmy said:
> I have a brand new IAXy I'm playing with. I do not get a dialtone on
> the phone, or any response at ll on the phone. No sound, no dialing, no
> ringing. The phone and wire are tested and known to be good. I think I
> have it setup correctly. When I
I have a brand new IAXy I'm playing with. I do not get a dialtone on
the phone, or any response at ll on the phone. No sound, no dialing, no
ringing. The phone and wire are tested and known to be good. I think I
have it setup correctly. When I give the iaxprov command I get this:
#iaxyprov 19
Hi,
I'm using the IAXy box (mostly the old blue) and I'm having the same
problem as you had (or still has?) about hung boxes. I've read that it
is caused because the unit needs at least 1500mA to operate and the
power suply shipped with the box is just 1000 ~ 1200mA.
Did you solve this issue??? i
2005/8/17, Andrès Tello Abrego <[EMAIL PROTECTED]>:
> A iaxy, is a CPE device that provides VOIP capabilities to normal phones,
> using the iax protocol...
>
> So is a little hardware, for telephony usages, which doesn't have a lot of
> features, and is't so cheap...
Oooh... right... it's like a
A iaxy, is a CPE device that provides VOIP capabilities to normal phones,
using the iax protocol...
So is a little hardware, for telephony usages, which doesn't have a lot of
features, and is't so cheap...
El Miércoles, 17 de Agosto de 2005 11:54, Yoann Le Bihan escribió:
> 2005/8/17, Andrè
2005/8/17, Andrès Tello Abrego <[EMAIL PROTECTED]>:
> I will answer you, the same somebody told me at IIRC.
>
> A watch has more processor power than a Iaxy...
Uuuuh... well, I feel stupid but... what is the meaning of "laxy" ?
'cause... a watch... ;o)))
sorry for my ignorance...
Best regards,
I will answer you, the same somebody told me at IIRC.
A watch has more processor power than a Iaxy...
So, in few words: No.
I already tried to have a lot ot things (callpickup, distinctive ring,
changing the time of flash pulse) and nothing...
El Miércoles, 17 de Agosto de 2005 11:33, C
Is there a way to cause an Iaxy to do distinctive ring?
Clint
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mail
On Thu, 2005-21-07 at 23:08 -0500, Steve Maroney wrote:
> I have the original version of the IAXY. I had it laying around collecting
> dust, now Im actually putting it to use. When I call my voicemail
> extension (8500), Before I get the voice prompts from the voicemail app,
> I hear tones that sou
I have the original version of the IAXY. I had it laying around collecting
dust, now Im actually putting it to use. When I call my voicemail
extension (8500), Before I get the voice prompts from the voicemail app,
I hear tones that sound like the caller id tones that are heard when
montoring a pho
All –
I currently have asterisk setup at home
and everything seems to be working great running Asterisk v1.8 and several Iaxy
devices. Call waiting signals come through to alert the user of a call waiting
call but when using the flash button on the analog phone the current user is
place
Eric Wieling aka ManxPower wrote:
Would it be accurate to add "...and never will support DNS"?
I believe so, yes. The processor in the IAXy has very little resources,
and I don't believe there are enough left to add DNS support. Mark may
surprise us one of these days, though :-)
___
The iaxy doesn't support dns. Its a very expensive little box with very
little features, unfortunately.
Tim
[EMAIL PROTECTED] wrote:
Hello All,
I have an iaxy(new version), and while it does the job well, there is
one thing I am looking for. I want to be able to specify a dns name on
the co
Kevin P. Fleming wrote:
[EMAIL PROTECTED] wrote:
I have an iaxy(new version), and while it does the job well, there is
one thing I am looking for. I want to be able to specify a dns name on
the config, not an ip. This does not seem to work if I try to set it as
such. Has anyone come up with
[EMAIL PROTECTED] wrote:
I have an iaxy(new version), and while it does the job well, there is
one thing I am looking for. I want to be able to specify a dns name on
the config, not an ip. This does not seem to work if I try to set it as
such. Has anyone come up with a workaround or solution
Hello All,
I have an iaxy(new version), and while it does the job well, there is
one thing I am looking for. I want to be able to specify a dns name on
the config, not an ip. This does not seem to work if I try to set it as
such. Has anyone come up with a workaround or solution to this?
I want
mmercial Discussion"
Sent: Monday, July 18, 2005 9:46 AM
Subject: Re: [Asterisk-Users] Iaxy and Echo
On Mon, 2005-07-18 at 09:25 -0600, Aaron with Morad wrote:
I have been searching for a while and can't find anything specific
like this.
Here's is my setup:
IAXy -- broadband
On Mon, 2005-07-18 at 09:25 -0600, Aaron with Morad wrote:
> I have been searching for a while and can't find anything specific
> like this.
>
> Here's is my setup:
>
> IAXy -- broadband network -- Asterisk -- TE110P -- Channel
> Bank -- POTS lines (FXO)
>
> Everything works fine ex
I have been searching for a while and can't find
anything specific like this.
Here's is my setup:
IAXy -- broadband network
-- Asterisk -- TE110P -- Channel Bank
-- POTS lines (FXO)
Everything works fine except for the echo at the
IAXy. There is no echo on the POTS end, so A
I'm trying to get a "Digium IAXy" working on an ethernet connected to my
asterisk server
using the instructions in the "Iaxy_installation_guide.pdf". I
configured the
iaxy.sample.conf file with my information:
server: 192.168.1.91
user: clab
pass: camaro
I also entered the suggested configuratio
Of Mojo with
Horan & Company, LLC
Sent: Monday, June 27, 2005 2:49 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAXY setup
do your firewall rules allow the proper port in? and you had no
problems in provisioning the iaxy? Have you tried it from
do your firewall rules allow the proper port in? and you had no
problems in provisioning the iaxy? Have you tried it from the same
subnet as *?
Michael Di Martino wrote:
I am attempting to get an iaxy device to connect to my asterisk box over
the public cloud however
It fails register a
I am attempting to get an iaxy
device to connect to my asterisk box over the public cloud
however
It fails register and I cannot
figure out why.
Below is my iax.conf, iaxy
setup file and debug output from iax2 debug.
My
iax.conf
[u7402]
type=friend
accountcode=iaxy
host=dynamic
secr
I am attempting to get an iaxy device to connect to my
asterisk box over the public cloud however
It fails register and I cannot figure out why.
Below is my iax.conf, iaxy setup file and debug output
from iax2 debug.
My iax.conf
[u7402]
type=friend
accountcode=iaxy
host=dynamic
I am attempting to get an iaxy device to connect to my
asterisk box over the public cloud however
It fails register and I cannot figure out why.
Below is my iax.conf, iaxy setup file and debug output from
iax2 debug.
My iax.conf
[u7402]
type=friend
accountcode=iaxy
host=dynamic
I am trying to get an iaxy device to connect to my asterisk box
over the public cloud however
It fails register and I cannot figure out why. Below is my
iax.conf, iaxy setup file and out from iax2 debug.
My iax.conf
[u7403]
type=friend
accountcode=iaxy
host=dynamic
secret=u7403p
Hi,
Iâve an Asterisk box with G729 Codec, a Broadvoice
trunk, IAXy connected locally and a Sipura 2000 (G729
as a preferred codec) Connected remotely. When Iâm
dialing out from the Sipura using the Broadvoice
trunk, everything is OK but if I dial the IAXy
extension, It keep ringing and I canâ
Hi all,
After upgrading to latest CVS head, I have problems using a IAXY device,
having slin problems:
Jun 15 18:59:31 NOTICE[8197]: channel.c:1475 ast_read: Dropping
incompatible voice frame on IAX2/lise-1 of format slin since our native
format has changed to ulaw
Because of that outside caller
Hi!
I noticed that the analog deskphones here in Italy have a timing for the
flash/pulse button that is not well understood by the IAXy.
It seems that flashing manually on the hook (so no cordless phones :-( )
makes IAXy happy. Is there a parameter to tune this timing?
Thanks,
Normando
___
> no the IAXy does not do DNS
Accidental hit of return...
so you have to reprovision if you have a server on a dynamic ip. I do
this by generating a new iaxy.conf file each time the ip changes and
sending it out tot he IAXy. Works every time.
___
Asteri
> Is it possible to have the "server" entry on the
> Provisioning file a domain (e.g. sip.mydomain.com)
> instead of an ip address?
no the IAXy does not do DNS
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman
Hi,
Is it possible to have the "server" entry on the
Provisioning file a domain (e.g. sip.mydomain.com)
instead of an ip address?
Thanks in advance
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yaho
And how/where can you download the latest firmware onto /var/lib/
asterisk/firmware/iax?
Thanks,
daniel
On May 7, 2005, at 9:13 AM, Time Bandit wrote:
I'd like to known what I have to do to upgrade
the firmware into a IAXy device.
It does it automagically when it connect to Asterisk if a newer
ve
> I'd like to known what I have to do to upgrade
> the firmware into a IAXy device.
It does it automagically when it connect to Asterisk if a newer
version is available.
Look in /var/lib/asterisk/firmware/iax and you will see iaxy.bin.
hth
___
Asterisk-U
Hello,
I'd like to known what I have to do to upgrade
the firmware into a IAXy device.
thanks
stefano.
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update optio
Is there a way to have the IAXY dialout with a call file?
I tried:
Channel: IAX2/606/5068012
Context: smvoice-dialout
Extension: smvoice
Priority: 1
RetryTime: 2
WaitTime: 20
MaxRetries: 0
And it did not work.
Is there a way to have the iaxy call out from the outgoing spool directory?
606 is the ex
And that is S much easier. Thank you!
W
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Time
Bandit
Sent: Wednesday, April 13, 2005 11:37 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAXy Provision
> Someone please tell me there is another way to provision an IAXy other than
> this horrid method….
> http://www.digium.com/downloads/Iaxy_Installation_Guide.pdf
http://dacosta.dynip.com/asterisk
hth
___
Asterisk-Users mailing list
Asterisk-Users@lists
Title: IAXy Provision
http://dacosta.dynip.com/asterisk/
enjoy
-Original Message-From: Wiley Siler
[mailto:[EMAIL PROTECTED]Sent: Wednesday, April 13, 2005
10:02 AMTo: Asterisk Users Mailing List - Non-Commercial
DiscussionSubject: [Asterisk-Users] IAXy
Provision
Title: IAXy Provision
Hello All,
Someone please tell me there is another way to provision an IAXy other than this horrid method….
http://www.digium.com/downloads/Iaxy_Installation_Guide.pdf
Thanks,
Wiley
___
Asterisk-Users mailing list
A
1 - 100 of 325 matches
Mail list logo
