Jerry,
Did you enable Ring Answer in the phone?
Look at your sip.cfg file for:
and
http://www.voicerd.org/index.php/Auto_Pickup
On Mon, Apr 14, 2008 at 4:06 PM, Jerry Geis <[EMAIL PROTECTED]> wrote:
> I was trying to get my polycom phon
At 15:06 4/14/2008, Jerry Geis wrote:
>I was trying to get my polycom phone to auto answer.
>I added this to the dialplan. Used a different phone to call "22"
>and the phone rang it did not auto answer.
>
>Did I miss something?
>
>exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0)
>ext
I was trying to get my polycom phone to auto answer.
I added this to the dialplan. Used a different phone to call "22"
and the phone rang it did not auto answer.
Did I miss something?
exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0)
exten => 22,n,SipAddHeader(Alert-Info: Ring Answer)
exten
you can also use answer as the ring type instead of ring-answer if you just
want it to pick up.
I would keep "Ring_Ans" the same throughout for simplicity
exten => 301,1,SetVar(_ALERT_INFO=Ring_Ans)
add an alert info type (say type 5)
then elsewhere add a corresponding ring type (say type
C F wrote:
The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.
Sorry to tell you but that is not a correct. The IP-501 I have about 15 of
them new and they came with 1.4.2 also they do us
TECTED] On Behalf Of dbruce
Sent: July 15, 2005 6:39 AM
To: C F; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems
Although the ipmid.cfg has been deprecated with SIP v1.5.2 (all the
parameters have been moved to sip.cfg), the fir
the
parameters will be in the sip.cfg file.
Regards,
Derek
- Original Message -
From: "C F" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Sent: Thursday, July 14, 2005 9:04 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer p
The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.
On 7/14/05, Chad Osmond <[EMAIL PROTECTED]> wrote:
> CVS Head from 07/07/2005
>
> I'm trying to make an IP-501 auto answer a call.
>
> ext
ial Discussion"
Sent: Thursday, July 14, 2005 4:07 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems
> Chad Osmond wrote:
>
> >CVS Head from 07/07/2005
> >
> >I'm trying to make an IP-501 auto answer a call.
> >
> >exten => 301,1,SetVar
Chad Osmond wrote:
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations
exten => 301,3,Dial(SIP/5001,15)
exten => 301,4,Hangup
Sip.cfg for Polycom phone
On 14-Jul-05, at 2:20 PM, Chad Osmond wrote:
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both
combinations
Try getting rid of the quotes:
exten => 301,1,SetV
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations
exten => 301,3,Dial(SIP/5001,15)
exten => 301,4,Hangup
Sip.cfg for Polycom phone
Ipmid.cfg
Asteri
Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer
B. J. Bomar wrote:
> Take a look at
> http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
> few small modifications it should work like a champ on the Polycom phones.
>
> B. J.
Polycom has a much better
Eric Wieling wrote:
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample configs have both a AutoAnswer and a Ring_Answer (for intercom):
http://www.kriscompanies.com/modules.php?name=Downloads&d_op=viewdownload&cid=1
That's only for station to station paging, not all stat
That worked great.
-Original Message-
From: B. J. Bomar [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 01, 2005 11:20 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom Auto-Answer
Take a look at
http://www.voip-info.org/
Kristian Kielhofner wrote:
B. J. Bomar wrote:
Take a look at
http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
few small modifications it should work like a champ on the Polycom
phones.
B. J.
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample conf
B. J. Bomar wrote:
Take a look at
http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
few small modifications it should work like a champ on the Polycom phones.
B. J.
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample configs have both a AutoAnswer and
Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Polycom Auto-Answer
That's kind of what I thought, but I am trying to put together a phone
to multi-phone paging system. I all ready have and overhead paging
systems, but the powers-at-be want a phone paging s
ch 01, 2005 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer
Eric Rees wrote:
> I am having a problem with Polycom auto-answer. I have the
auto-answer
> working between PhoneA and PhoneB, but when I try to use the interco
Eric Rees wrote:
I am having a problem with Polycom auto-answer. I have the auto-answer
working between PhoneA and PhoneB, but when I try to use the intercom
between more then one phone I start having problems. PhoneA dials *3
which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but only
I am having a problem with Polycom auto-answer. I have the auto-answer
working between PhoneA and PhoneB, but when I try to use the intercom
between more then one phone I start having problems. PhoneA dials *3
which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but only
one will pick up
I have my * and polycom system setup to do
Auto-Answer for internal SIP/Staff calls, and I am running into an issue with
this and the polycom call transfer feature. * is seeing a new call come through
from the polycom and is then transferring the call over. I need to know if
there is some w
22 matches
Mail list logo
