going with a HFC card since they are very inexpensive cards.
Any advice would be greatly appreciated!
Kind Regards.
Christiaan Brink
Systems Developer
Molo Afrika Speech Technologies (Pty) Ltd.
(Cell) +2782 410 7370
(Tel) +2712 346 3336
(Fax) +2712 346 3337
South Africa
-Original
not been very
successful.
Kind regards
Christiaan Brink
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman
Hi
What type of expansion cards do you have on this board, i.e. how many fxo's
and how many fxs?
Regards,
Christiaan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ciprian Zetea
Sent: Thursday, November 18, 2004 12:02 PM
To: [EMAIL PROTECTED]
Subject:
hfc card. Any advice
please! Are the drivers built in? Or is it necessary to download them?
Or are they included with chan_capi?
It is likely that I will get the same errors as you are getting and then we
can put our heads together in solving them
Kind Regards,
Christiaan Brink
Systems
Hi
No Problem.
I've got a TDM400b board with 2 FXS boards and 2 FXO boards. I'm using the
fxo board in this fashion as you describe. However, I direct it to
voicemail. What you would do is the following.
In extensions.conf
exten = s,1,Dial(SIP/yourSipConfigName)
This should work fine.
List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] mISDN kernel 2.6.9
hi christiaan.
Christiaan Brink schrieb:
I'm currently busy on a similar application with a hfc-card. However, my
needs is to interface the ISDN card in NE-mode with the operator. If tried
using Hisax but ran
their public operator?
If so, can you please supply me with details regarding the
type of card used, manufacturer, etc.
Also can you please provide me with details regarding the drivers
used and so forth.
Kind Regards,
Christiaan Brink
I've tried using bri-stuff. I got everything compiled and installed but, it
seems that the driver stalls our ISDN NTU provided by the operator.
As I said I'm running the 2.6.5 kernel. I have a HFC card and our operator
uses alaw over EuroISDN. My zaptel.conf file is as follows:
loadzone=us
have any advice, it will be
greately appreciated.
Kind Regards,
Christiaan Brink
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robinson Tim-W10277
Sent: Thursday, November 18, 2004
4:00 PM
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: RE