[Asterisk-Users] DID, Sending dialled number to PBX

Hallo All I been looking at all list and i know this been discussed millions of times for incomming calls I need to send the dialled number to the pbx so that the correct extension can be rung on the pbx side current setup: pbx ext-- fxs asterisk -- asterisk fxo ---co line(pbx). What are

Re: [Asterisk-Users] does asterisk support menus?

read the default extensions.conf file. some examples included - Original Message - From: Muhammad Muzzamil Luqman To: asterisk-users@lists.digium.com Sent: Tuesday, February 22, 2005 2:35 PM Subject: [Asterisk-Users] does asterisk support menus?

Re: [Asterisk-Users] Conecting to asterisk server through NAT usingIAX

well, it seems like the 2 are communicating correctley.. just went through all the logs what is the error that you recieve? - Original Message - From: Bartosz Wegrzyn - asterisk [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion

Re: [Asterisk-Users] Minimal hardware requirements

Hi If you going to run digium hardware, please make sure that machine does PCI 2.2.. otherwise you will NOT be able to get the card to work. the slowest machine we found was a pIII that supported pci 2.2 chow Liaan - Original Message - From: Paul Hales [EMAIL PROTECTED] To: 'Asterisk

Re: [Asterisk-Users] Extra sounds (Weather)

-Commercial Discussion' asterisk-users@lists.digium.com Sent: Wednesday, February 16, 2005 12:23 PM Subject: RE: [Asterisk-Users] Extra sounds (Weather) Liaan vd Merwe wrote on Tuesday, 15 February 2005 1:37 PM: http://edgett.bc.ca/simonsays/archives/000228.html Thank you, but this is not the script

Re: [Asterisk-Users] Extra sounds (Weather)

: Wednesday, February 16, 2005 1:50 PM Subject: RE: [Asterisk-Users] Extra sounds (Weather) Liaan vd Merwe wrote on Wednesday, 16 February 2005 2:53 AM: This is the example script (extracted from that link) you will need to find a weather page for your region an then change the urls and grep

Re: [Asterisk-Users] solid-state asterisk pbx?

http://lists.digium.com/pipermail/asterisk-users/2004-March/038463.html follow the thread.. should give you some info - Original Message - From: Matt Kemner [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday,

Re: [Asterisk-Users] solid-state asterisk pbx?

http://www.voip-info.org/wiki-Asterisk+Embedded+Systems - Original Message - From: [EMAIL PROTECTED] To: Asterisk-Users@lists.digium.com Sent: Tuesday, February 15, 2005 1:44 PM Subject: [Asterisk-Users] solid-state asterisk pbx? I've been thinking of making a (mostly) solid-state

Re: [Asterisk-Users] X-Lite Softphone

Hi while on a call.. did you check your CPU usage.. i have a P3 and sometimes when i move my mouse, xlite starts to stutter.. cpu then running 100% just my 2cents chow L - Original Message - From: Richard J. Sears [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Tuesday,

Re: [Asterisk-Users] Extra sounds (Weather)

http://edgett.bc.ca/simonsays/archives/000228.html - Original Message - From: Trevor G. Hammonds [EMAIL PROTECTED] To: 'C F' [EMAIL PROTECTED]; 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com Sent: Tuesday, February 15, 2005 11:16 PM Subject: RE:

Re: [Asterisk-Users] Getting SPEEX to work

Hallo I used it, but quality was not that good.. extreamly soft.(any ideas why?) if you post you speex configs, i will try and help regards liaan - Original Message - From: Florian Overkamp [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

Re: [Asterisk-Users] Re: Detect hangup

hi thanks very much I need to look into the dsp.c file.. the tone generate is abou 2 seconds on. then 0.5 off. busy changing the pabx connection so i can plug directley into a co-line. this would enable the pabx and * to use loop start.. and i think that will solve my problems thanks and

[Asterisk-Users] Detect hangup

Hi all How do one "record" the tone that a pbx gives for hangup, so that one can use that in indications.conf? thanks Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'___ Asterisk-Users mailing list

[Asterisk-Users] Wait for Digits

Hi all I'm being really stupid today. i simply want asterisk to answer a incomming call, then wait for digits dialed. and then dial that extenstions but i keep on getting: WARNING[3314]: pbx.c:2017 ast_pbx_run: Invalid extension '5', but no rule 'i' in context 'zap-in' my config: exten =

[Asterisk-Users] Wait for Digits.. solved

Sorry all figured out one needs to include the context that the extensions to be dialed into the current context thanks Liaan __Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Asterisk-Users] Digium TDM400p troubles

Hi all I installed a tdm400p into a old p2 machine. I'm not able to see it under /proc/interupts or using lspci.. we removed all other cards. changed slots, forced irq to that slot.. etc etc. what is the min specs needed to get one of these cards running? thanks L Do you Yahoo!?

Re: [Asterisk-Users] IAX2 Trunk Problems with NAT

Hallo i had same problem you need to staticly set the register refresh variable in the iax2.h file and recompile. (cannot remember exact variable.. will look if you cannot find it. put this on the external server. Ihad to drop mine down to 14 sec, the default is 60. the problem is that the

Re: [Asterisk-Users] IAX2 Trunk Problems with NAT

IAX_DEFAULT_REG_EXPIRE that is the value to be changed in iax2.h - Original Message - From: Mustafa N. Deeb To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Sent: Monday, February 07, 2005 9:45 AM Subject: [Asterisk-Users] IAX2 Trunk Problems

Re: [Asterisk-Users] IAX2 Trunk Problems with NAT

when you did the iax show registration, what dit the refresh say? did it say the time you specified? - Original Message - From: Mustafa N. Deeb To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Sent: Monday, February 07, 2005 11:58 AM Subject: RE:

Re: [Asterisk-Users] IAX2 Trunk Problems with NAT

How did you configure the trunk between the 2 servers? using register = user:[EMAIL PROTECTED] server or using extension? - Original Message - From: Mustafa N. Deeb To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Sent: Monday, February 07, 2005

Re: [Asterisk-Users] IAX2 Trunk Problems with NAT

ok. your options are: setup publishing rule on your IPtables to allow access to you internal * from external * or: register to the external server using the internalserver-peer username:pass then you can, in your extension.conf, call dial(iax2/internal-peer) let me know if you need some help

Re: [Asterisk-Users] No Playback() when Digicom TE110P enabled

Hi I had same issue.. It was an IRQ class between ztdummy and my sound card. you might want to load your sound card before the others.. or vice versa. cheers liaan - Original Message - From: Gareth Blades [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, February 04,

[Asterisk-Users] IAX2 register Refresh

Hi all I been looking into the whole code strugture of chan_iax and i see there is a option to specify the refresh rate of registrations: But there is no code to actually load this from the config file thus i changed the setting in chan_so.h, and recompiled. But still my refresh rate is 60

Re: [Asterisk-Users] IAX2 register Refresh

-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, February 04, 2005 6:09 PM Subject: Re: [Asterisk-Users] IAX2 register Refresh On February 4, 2005 10:52 am, Liaan vd Merwe wrote: I been looking into the whole code strugture of chan_iax and i see there is a option

Re: [Asterisk-Users] IAX2 register Refresh

-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, February 04, 2005 6:09 PM Subject: Re: [Asterisk-Users] IAX2 register Refresh On February 4, 2005 10:52 am, Liaan vd Merwe wrote: I been looking into the whole code strugture of chan_iax and i see there is a option to specify

Re: [Asterisk-Users] IAX2 register Refresh

yes, that is true, but luckely all my dns etc is sitting on firewall machine, so no natting except for iax. i've been monitoring this for last few hours, and the only connections remaining is the iax. thanks liaan - Original Message - From: Rich Adamson [EMAIL PROTECTED] To: Asterisk

Re: [Asterisk-Users] IAX dns lookups

the DynDns changes. Regards Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Liaan vd Merwe Sent: 03 February 2005 07:38 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] IAX dns lookups Hi all Do any

Re: [Asterisk-Users] X100P not hanging up...

hi try and enable detect busy .. worked for me, think zapata.conf cheers l - Original Message - From: Carlos Chavez [EMAIL PROTECTED] To: Asterisk asterisk-users@lists.digium.com Sent: Wednesday, February 02, 2005 5:23 AM Subject: [Asterisk-Users] X100P not hanging up... I have an

Re: [Asterisk-Users] Asterisk waits 4 rings before FXO answers incomingcall

I had this as well it is waiting for callerid. you can try and disable caller id if you dont need it - Original Message - From: Nigel Burgess [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Wednesday, February 02, 2005 1:43 PM Subject: [Asterisk-Users] Asterisk waits 4 rings

Re: [Asterisk-Users] * not hanging up when call from POTS to IAX phone

Hi Have you enabled detect busy? - Original Message - From: Robert Webb To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Wednesday, February 02, 2005 5:01 PM Subject: [Asterisk-Users] * not hanging up when call from POTS to IAX phone

[Asterisk-Users] * not hanging up when call from POTS to IAX phone

I had same thing.. mmm i read your other post as well. could it be that asterisk is not configured for you region? ie, hangup sounds like this.. busy like this. etc ( forgot where one sets this) - Original Message - From: Robert Webb To: Asterisk Users Mailing List -

Re: [Asterisk-Users] Asterisk@home - problem getting console output ...

edit /etc/asterisk/logger.conf uncomment one of the console lines and reload chow L - Original Message - From: Robert Augustyn [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com Sent: Wednesday, February 02, 2005 10:36 PM

[Asterisk-Users] IAX dns lookups

Hi all Do any of you know i can force asterisk to lookup ip addresses for peers and trunks everytime it tries to make a call. One of the peers has a dynamic ip and is using DynDNS to register host. Now i need to reload asterisk everytime i want to call it thanks liaan

[Asterisk-Users] IAX registration keep alives

hallo all could anyone tell me how to get the * to send keepalive packets over a registration "trunk" or how to increase the amount I'm having natting issues, (the machine is siting behind 2 nat firewalls) thanks liaan Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second

Re: [Asterisk-Users] IAX registration keep alives

+config+iax.conf Guills From: Liaan vd Merwe [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 4:09 AMTo: Asterisk-Users@lists.digium.comSubject: [Asterisk-Users] IAX registration keep alives hallo all could anyone tell me how to get

Re: [Asterisk-Users] Fwd and Tollfree

working. Rene Kluwen Chimit - Original Message - From: Liaan vd Merwe To: asterisk-users@lists.digium.com Sent: Friday, January 28, 2005 4:48 PM Subject: [Asterisk-Users] Fwd and Tollfree Hallo all do any of you know

Re: [Asterisk-Users] IAX registration keep alives

From: Liaan vd Merwe [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:17 PMTo: Asterisk Users Mailing List - Non-Commercial DiscussionSubject: Re: [Asterisk-Users] IAX registration keep alives Hi already tried that After lots

Re: [Asterisk-Users] IAX registration keep alives

. Ifyoureallywanttochangetheport, well,youcouldlookatthefirstlineinthe[general]sectionofiax.confwhereitsaysport=,ortryreadingthedocsattheURLIpostedbelow:) Guills From: Liaan vd Merwe [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:17 PMTo: Asterisk Users

[Asterisk-Users] Fwd and Tollfree

Hallo all do any of you know if the toll free access to the Netherlands is still working via FWD or Iaxtel? thanks liaan Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'___ Asterisk-Users mailing list