The easiest way is to just run the Dial() command to forward the call to the
hard fax without ever Answer()-ing the call. Without an Answer() on the call,
Asterisk can't listen for fax detection (because the call hasn't been set up
and there is no audio leg yet).
Thank you,
Noah Engelberth
the currently loaded default
indication zone is, though there should be a line in the indications.conf file
at a minimum.
Thank you,
Noah Engelberth
System Administration
MetaLINK Technologies
nengelbe...@team-meta.net
419-990-0342
-Original Message-
From: asterisk-users-boun
at on the Asterisk side that would fix
this problem? Does anyone know if there have been changes in authorization
handling since 11.5.1 that would fix the issue?
Thank you,
Noah Engelberth
MetaLINK Technologies
an XML file with all
the normal headers tags).
Also, have you verified with logging on the provisioning server that the
configuration file is actually being pulled?
Thank you,
Noah Engelberth
MetaLINK Technologies
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun
an attendant console). This tab is only accessible
within the /admin/advanced web interface, or you can use the Server_Type
configuration option within the pseudo-XML config files, if you’re doing auto
provisioning.
Noah Engelberth
MetaLINK Technologies
From: asterisk-users-boun
lost the race. Practically speaking,
it's not a huge problem, but the best practice would be to prevent the
auto-hunting and avoid the race condition altogether).
Thank you,
Noah Engelberth
MetaLINK Technologies
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun
they went on in (your removal choices are either the last one added or
all of them), but for what you're describing as what you need, hangup handlers
should work fairly well.
Thank you,
Noah Engelberth
MetaLINK Technologies
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun
on
to NetVanta support. I appreciate you taking the time to provide me that
information.
Thank you,
Noah Engelberth
System Administration
MetaLINK Technologies
nengelbe...@team-meta.net
419-990-0342
--
_
-- Bandwidth and Colocation
number changes. Given that I don't have
ignoresdpversion=yes either globally or for this peer, does this mean that
Asterisk will only honor new SDP packets if the version is higher, or will it
honor any change? Or should I be looking somewhere else?
Thank you,
Noah Engelberth
MetaLINK Technologies
with the call
you want to.
Thank you,
Noah Engelberth
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs
)})
same = n,ExecIf($[${GROUP_COUNT(${ARG1}@activecalls)}
1]?Set(DEVICE_STATE(Custom:${ARG1})=INUSE):Set(DEVICE_STATE(Custom:${ARG1})=NOT_INUSE))
same = n,Return()
Thank you,
Noah Engelberth
--
_
-- Bandwidth and Colocation
a choice of whether or not to accept the call.
A very high level overview is here:
http://answers.oreilly.com/topic/2705-asterisk-how-to-use-followme-to-call-a-series-of-phone-numbers/
(though that gave me enough to get started)
Thank you,
Noah Engelberth
MetaLINK Technologies
), and then
lets the call fall through
6) Asterisk fires the sendtodialplan incoming logic for the message that
was sent in step 3
Thank you,
Noah Engelberth
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided
On 20/09/2012, at 3:59 PM, Noah Engelberth
n...@directlinkcomputers.commailto:n...@directlinkcomputers.com wrote:
I've been working on an interactive XMPP interface so users at my office can
interact with the timeclock and queues by XMPP (in addition to IVR menu, which
has been running just
On Friday, August 31, 2012 06:48:46 PM Noah Engelberth wrote:
I’m trying to set up a way that our users can send an XMPP message to
Asterisk (unsolicited) to request information, such as voicemail
status or the like. No matter what I set for the dialplan, I’m only
seeing Asterisk
64-bit. Asterisk is
able to send using JabberSend via other processing in my dialplan.
Thank you,
Noah Engelberth
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Markus
Sent: Saturday, August 25, 2012 3:08 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] Basic GotoIf question
Hi
Am 25.08.2012 09:21, schrieb Noah Engelberth:
Hi all,
on Asterisk 1.4.21 I'm trying to block, that means directly hang up on,
several inbound caller ID's like this:
exten = ,1,GotoIf($[${CALLERID(num)} != ]?pass) exten =
,n,GotoIf($[${CALLERID(num)} != ]?pass) exten =
]. With the DUNDi switch active, I get the
warning message above and the call hangs up.
Is there something I'm doing wrong in my config? Is this basically expected
behavior that I need to adjust around?
Thank you,
Noah Engelberth
MetaLINK Technologies
extensions it's announcing from the other side.
Thank you,
Noah Engelberth
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar
. Then you can use Dial(b)
when the call goes out to the actual extension.
Richard
--
Heh, didn't really think of that. It looks like that should do what I need it
to. Thanks.
Thank you,
Noah Engelberth
MetaLINK Technologies
/q51XUeHe
The short of the output is - there is no console output showing == Extension
Changed 302[hints] new state on the Ringing or InUseRinging events - only on
InUse or Idle events (which matches what I'm seeing on the phones).
Thank you,
Noah Engelberth
MetaLINK Technologies
the correct state for 301@hints when I make the
manual change to RINGINUSE (or RINGING). sip show subscriptions does show 2
subscriptions (1 each from 302 and 303) for 301@hints.
Thank you,
Noah Engelberth
MetaLINK Technologies
output occurs
when I try to place my test call to send the XMPP message.
Kinda going cross-eyed from looking at this - is there anything else I should
try or anything wrong in my configuration?
Thank you,
Noah Engelberth
MetaLINK Technologies
to INUSE after they pick
up the call (like Dial() U), but is there anything that I can use to manipulate
the channel that is calling the agent while/before it is ringing?
Thank you,
Noah Engelberth
MetaLINK Technologies
and InUseRinging statuses if they subscribe directly to a SIP
device's state with the hint - the issue only seems to be effecting Custom
devices. Can anyone think of anything else I should check?
Thank you,
Noah Engelberth
MetaLINK Technologies
are ATCOM AG198 ATA
gateways, either behind the ONTs (but on the same voice VLAN the ONTs use to
talk to Asterisk) or on my Asterisk server's local network. The voice VLAN is
a different subnet than Asterisk is on, but no NAT exists between the subnets.
Thank you,
Noah Engelberth
System
transmission problem
On Thu, Aug 02, 2012 at 12:45:28PM +, Noah Engelberth wrote:
I am having difficulties with customer-bound DTMF being very short
clipped off (and basically unusable, as systems on the customer side
aren't recognizing the DTMF digits, and I can barely tell that DTMF
-Original Message-
From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-
boun...@lists.digium.com] On Behalf Of Noah Engelberth
Sent: Thursday, August 02, 2012 12:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DTMF
-Original Message-
From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-
boun...@lists.digium.com] On Behalf Of Noah Engelberth
Sent: Thursday, August 02, 2012 1:10 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DTMF
in my /tmp directory (I
assume that's a core dump from the crash?)
Thank you,
Noah Engelberth
System Administration
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk
the backed-up
working config files to a brand new clean-load server, upgrading Asterisk, and
recreating the configurations by hand), and nothing seems to be helping.
Thank you,
Noah Engelberth
MetaLINK Technologies
stopped working
- Original Message -
From: Noah Engelberth n...@directlinkcomputers.com
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Tuesday, July 3, 2012 10:56:10 AM
Subject: [asterisk-users] IAX trunking stopped working
: [asterisk-users] Asterisk 10.4.0 GotoIf to label problem when
DUNDi active
On Wed, 30 May 2012 18:02:00 +
Noah Engelberth n...@directlinkcomputers.com wrote:
I have a hotdesking environment at my main office, and up until today,
the GotoIf that jumps straight to voicemail if a user isn't
-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 10.4.0 GotoIf to label problem when
DUNDi active
Hi,
You might have already tried but can you try reducing the label name and
exclude the underscore in it !
Regards,
Sammy
On Wed, May 30, 2012 at 11:02 PM, Noah Engelberth
n
I should file?
Thank you,
Noah Engelberth
MetaLINK Technologies
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs
Uhm, if the dialplan is exactly as you pasted, you're not setting TESTVAR2 to
anything. You would need some sort of Set(IAXVAR(TESTVAR2)=...)
Noah
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ruddy Gbaguidi
Sent: Saturday, May 19,
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of list...@gmail.com
Sent: Monday, April 09, 2012 8:34 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] MYSQL INSERT QUESTION IN DIALPLAN
I am not a
The timeout value is milliseconds, not seconds. I know that wasn't properly
documented in older versions of Asterisk, but it is at least in 10.1
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Bryant Zimmerman
Sent: Sunday, March
I'd try turning off the jitterbuffer and see if that makes things better. I
just traced a similar call quality issue transferring calls incoming DAHDI on
one * box to another * box, and turning off the jitterbuffer on the side that
couldn't hear (in my case, the * box with the DAHDI lines, as
/ Asterisk 10
vanilla server? Not opposed to something commercial, provided it actually
works and isn't a disaster to set up.
Thank you,
Noah Engelberth
MetaLINK Technologies
System Administration
nengelbe...@team-meta.netmailto:nengelbe...@team-meta.net
419-636-0999 ext 100
The message does
My understanding regarding the pattern match order is that Asterisk will not
search include= contexts unless there is no matching extension in the
original context. So, since _X. matches anything, the include=parkedcalls
context will never be searched.
A better way to accomplish what you want
breaking my ability
to see that the person placing the intra-office call was on another line if a
second call rang their phone or what have you.
Noah Engelberth
MetaLINK Technologies
System Administration
The message does not contain any threats
AVG for MS Exchange Server (2012.0.1913 - 2114/4827
.so is
reporting that it has been used 0 times since asterisk was started.
Noah Engelberth
Direct Link Computer Systems
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update
44 matches
Mail list logo