John,
Voicepulse Connect has been great to me. I've been using it for over a year
now, and do not have any major complaints, except that there are no
printable receipts for credit card transactions. SIP is also the preferable
protocol, as IAX seems to have some issues. Customer service is usually
-users@lists.digium.com
Subject: Re: [asterisk-users] VoicePulse Connect
Wes,
What kind of service outages did you experienced?
This would use for my office and I cannot afford for any dropped calls or
poor audio quality, when talking to customers.
-John
From: Wes Baehr [EMAIL PROTECTED
the primary for now. The voice quality has been very good, and
their technical support has been absolutely fantastic for a no-charge
service.
Wes Baehr wrote:
If you cannot afford any dropped calls or poor audio quality, you need a PRI
or POTS connection. It doesn't matter how great the carrier
from a SIP trunk).
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Stephen Bosch
Sent: Wednesday, August 08, 2007 6:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] VoicePulse Connect
Wes Baehr wrote:
I had
Just out of curiosity, could you 'show queues'?
Thanks.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jay Moore
Sent: Friday, June 22, 2007 9:12 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk
It sounds more like the agents are making the transfers...
If a caller were to transfer a call (#0 1555-555-1212), they would be
transferring the AGENT to the that number, not themselves!
Either way, the caller SHOULD be disconnected after the transfer. (Or
perhaps leaked somewhere else into the
they have to push ADDITIONAL
digits to complete the transfer, they just use a different # sequence. (I
have mine set up as #8ext -- 8 for V)
Email me directly and I can make up a patch for you (for 1.4 anyway).
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk
In my (limited) experience with rxfax, it has issues with large faxes. I
soon gave up on rxfax and switched to hylafax (which works much better).
Check the wiki for installation instructions. (And hylafax will
correctly hangup when the fax has completed/failed/whatever.)
Wes Baehr
-Original
The problem can be reproduced in the same way by putting a caller on hold,
unholding, and holding again. The MOH restarts from the beginning of
whichever file it was playing last. (I have random enabled, so it randomly
picks a please wait for the next blah blah blah file). (I'm using 1.4
release).
Queue option r, like so:
Exten = s,1,Queue(somequeue|r)
Try 'show application queue' at the CLI
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Ex Vitorino
Sent: Thursday, January 11, 2007 5:34 PM
To: Asterisk Users
**exten while the BLF
light is in ringing state. You can use whatever you want.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Ove Aursand
Sent: Monday, December 04, 2006 1:43 PM
To: Asterisk Users Mailing List - Non-Commercial
HUMAN-%d silenceDuration-%d afterGreetingSilence
MAXWORDS-%d wordsCount-%d maximumNumberOfWords
LONGGREETING-%d voiceDuration-%d greeting
--
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf
it with
${ODBC_FunctionName(arg1,arg2,)} and it executes and returns the
specified data.
--
Wes
Baehr
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bruce Reeves
Sent: Wednesday, November 15, 2006
7:56 AM
To: Asterisk
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk
This is not necessary - unless you are setting call-limit in sip.conf, and
don't have any patches on 1.2 to prevent app_queue from sending multiple
calls to the same member, they will automatically receive the call on the
second line appearance. (And third, and forth, and so on.)
Wes Baehr
The default queue configuration would achieve this. Based on your queue
calling method (ringall, roundrobin, etc), all the agents would be able to
receive the 2nd call, and whoever answers it first gets it.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users
- Consider the channel unavailable if the channel is in use at all
j - Support jumping to priority n+101 if no channel is available
Use chanisavail to check if one or both phones is busy - if either is busy,
redirect to voicemail/busy/whatever.
Wes Baehr
-Original Message-
From: [EMAIL
if there are free agents, it will join the queue, otherwise, it can do
something else. Contact me off-list if you're interested.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Artifex Maximus
Sent: Tuesday, September 05, 2006 9
the call
has dropped.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Douglas Garstang
Sent: Monday, August 07, 2006 2:57 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-
Commercial Discussion
Subject: [asterisk
Has anyone used the new 3102? If so, does it work correctly?
I heard lots of horror stories about the SPA-3000 causing terrible echo,
picking up voice tones as DTMF, etc, so Im a little hesitant to buy.
Thanks,
Wes Baehr
--
No virus found in this outgoing message.
Checked
from ${VM_CIDNAME}
(${VM_CIDNUM}) on ${VM_DATE}. (Mailbox: ${VM_MAILBOX}, Length: ${VM_DUR})
[snip]
205 = 1234,Wes
Baehr,[EMAIL PROTECTED],secretemailaddressthatforwardstomycellular
Wes Baehr
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert DeVries
Show application AddQueueMember
AddQueueMember(queuename[|interface[|penalty[|options]]]):
Exten = z,1,AddQueueMember(thisqueue||10)
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andre
Courchesne - Consultant
Sent: Wednesday, July 05
That's strange... they're just screwing nufone directly, when nufone
attempts to port the number to its new carrier? I ported my TF to another
provider (not nufone) and it took about 3 days.
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jens
be wrong)
Wes Baehr
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: Friday, June 16, 2006 4:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Hitting * in a queue call hangs up?
Kevin/et all,
I thought
I have experienced a similar issue... although I'm not using ZAP. I've had
several calls randomly drop, where res_features.c said Bridge failed on
channels IAX2/blah and SIP/blah, and only since upgrading to 1.2.9.1. (But
maybe that's just me)
Wes Baehr
-Original Message-
From: [EMAIL
chanspy sounds perfectly normal. (And neither party is
complaining of bad sound)
So, periodically, chanspy seems to lose sync with its source
has anyone else had this problem?
Running 1.2.7.1, calls are all SIP-IAX2
Thanks!
Wes Baehr
--
No virus found in this outgoing
Check your queues.conf for maxlen=1
in the queue config you are having problems with. (Maxlen sets the maximum
length of a queue.)
Wes Baehr
Ability Business Computing, Ltd.
Office/Cell/Fax: 330.882.0455 x25
[EMAIL PROTECTED]
From: [EMAIL PROTECTED]
[mailto:[EMAIL
, an extension, or extension
and
context may be specified. Otherwise, the current extension is
used.
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455 x35
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Theyve been having lots of problems over
the past week. Sometimes theyre up, sometimes theyre down, sometimes calls
are rejected, sometimes calls just time out.
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25
Cell: 330.882.0455 x35
Fax: 330.882.0455
[EMAIL
Even stranger is when calls (to the same
server) work from one asterisk server account, but fail from another asterisk
server account. Sometimes changing the server helps, sometimes it doesnt.
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25
Cell: 330.882.0455
http://forums.digium.com/viewtopic.php?t=4073
I modified it some, but it integrates with my cms and
provides realtime call stats. Contact me off list if youve like to see how it
works.
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25
Cell: 330.882.0455 x35
Show application chanisavail
Should be what you need
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455 x35
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Carl
Youngblood
Sent: Friday, May 05
Simply generate or record a 5-second sample of ringing. Then use
Background() to play that ringing file - if someone presses 9, they will be
routed accordingly, or otherwise sent to your default extension.
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455
,Noop
exten = 825,n,Set(TIMEOUT(response)=5)
exten = 825,n,Answer();
exten = 825,n,Ringing();
exten = 825,n,WaitExten(5);
exten = 825,n,Dowhatever
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455 x35
[EMAIL PROTECTED]
-Original Message-
From
one of the best providers I've used so far, with great
support (and prices).
(And my toll-free service hasn't been interrupted either).
--
Wes
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Wes Baehr
Sent: Tuesday, April 18, 2006 3:48 PM
To: 'Asterisk
Well this is disappointing. Time to find somebody else...
--
Wes
-Original Message-
From: NuFone Operations [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 18, 2006 3:44 PM
To: [EMAIL PROTECTED]
Subject: NuFone Update: DIDs
Effective 3pm EST Today, April 18th, 2006 Telesthetic, the
It was my understanding that when an agent answers a queue call, he will not
be hit with another call until he finishes his current call.
Currently, my agents get hit with calls from the queue while they are still
on a previous call, so I've resorted to setting their call-limit in
sip.conf to 1.
Has or does anyone use Gafachis (www.gafachi.com) origination (and
termination services)? If so, what can you tell me about their call quality,
and have you had any problems with the service?
Comments are appreciated!
Thanks,
Wes Baehr
Ability Business Computing, Ltd.
Office
! :)
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455 x35
[EMAIL PROTECTED]
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit
press pound to enter your voicemail, you will not
activate the transfer (unless you press #1/#2)
Wes Baehr
Ability Business Computing, Ltd.
Office: 330.882.0455 x25 Cell: 330.882.0455 x35
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Same here. The call is accepted,
but never makes any progress. I tried all four servers with the same results.
Wes Baehr
Ability Business Computing, Ltd.
Office: (330) 882-0455 x25
Cell: (330) 990-9445
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
? Has anyone else had contact with NuFone or
set up a new DID recently?
Thanks! =)
Wes Baehr
Ability Business Computing, Ltd.
Office: (330) 882-0455 x25
Cell: (330) 990-9445
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database
realize that all agents
are busy and continue to the next priority immediately?
Limiting the queue size wouldnt help, since
its dynamic.
Thanks J
Wes Baehr
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.18/230
42 matches
Mail list logo
