Hi everyone,
Sorry for forwarding and top-posting this email again but its as if my
TDM40b has keeled over yesterday. After a few hours last night and
swapping the card to another asterisk server (with exactly the same
result) I needed to have the FXS ports working ASAP this morning so I
Hi all,
Today my TDM40B (a TDM400 with 4 FXS modules) has gone funny - there is
no dialtone from any port.
When I look at the CLI display in * and pick up a line it says Sep 29
20:36:25 WARNING[1093299120]: chan_zap.c:5313 handle_init_event: Unable
to play dialtone on channel 3 and it does
OK, I have a Asterisk @ Home 1.0.7 server with two Digium TDM400 cards, one 4
port FXO and one 4 port FXS. When I plug an analog cordless phone into the
TDM40B card and setup a ZAP extension, the phone rings in and you can answer
just fine. The weird part is when you try to get dialtone from
, 2005 1:06 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] TDM40B and weird analog problem
OK, I have a Asterisk @ Home 1.0.7 server with two Digium
TDM400 cards, one 4
port FXO and one 4 port FXS. When I plug an analog cordless
phone into the
TDM40B card and setup a ZAP
the ring group and testing then?
Tom
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, August 10, 2005 1:06 PM
To: asterisk-users@lists.digium.com
Subject:[Asterisk-Users] TDM40B and weird analog problem
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, August 10, 2005 4:23 PM
To: asterisk-users@lists.digium.com
Subject: RE: [Asterisk-Users] TDM40B and weird analog problem
Tom,
Thanks for the response, here are my answers.
How did you
Hi !
I have a TDM40B and i try to use it connected to modem for incoming call
data transfert.
I have no problem to use it with a phone and a talk communication work fine.
But when we try to use with modem, with most modem, we got data carrier for
few seconds and channel hungup.
[ TYPE: Null
I have a Panasonic Multitalk8 cordlesshooked
up to a port on a TDM40B talking over SIP to a Grandstream ATA-286 and during
every call I get intermittent stretches of about 30-60 seconds where it appears
the microphone input on the TDM40B gets super sensitive and my voice is broken
up on the
When on a call from a TDM40B out through a
X100P how do you answer a call waiting? I have tried the flash button on
the phone and I have read about *0 which does not appear to work for me
either. Is there some sort of configuration I have to do to make this
work? My zapata config file
I have 2 xp100's and one TDM400P.
I've plugged a phone into the tdm40b, and when i take it off hook sometimes
i get a dialtone, other times i get the message
Power alarm of module2, resetting spit out to the console from the wcfxs
driver
does anyone know what this could be? I've tried two
I have problem with a TDM40B installation.
When i modprobe wcfxs the error i get is the
following:
/lib/modules/2.4.19-4GB/misc/wcfxs.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters.
You may find more
what does 'dmesg' says ?
Martin
On Fri, 12 Sep 2003, Jim Paraschou wrote:
I have problem with a TDM40B installation.
When i modprobe wcfxs the error i get is the
following:
/lib/modules/2.4.19-4GB/misc/wcfxs.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect
I have just a second case where after * had been up for a few weeks working
perfectly, it suddenly stopped talking to all the extensions. The I4L was
still working perfectly though...
I tried to stop asterisk, rmmod the modules, and insmod, and re-start
asterisk but it did this:
Using
13 matches
Mail list logo