Re: [Astlinux-users] Can't Access tty after initial-setup format

2014-07-03 Thread Lonnie Abelbeck
hink of any major drawbacks to > this type of setup. > > Thanks again, > > Josh > > > From: li...@lonnie.abelbeck.com > > Date: Wed, 2 Jul 2014 19:41:06 -0500 > > To: astlinux-users@lists.sourceforge.net > > Subject: Re: [Astlinux-users] Can't Acc

Re: [Astlinux-users] Can't Access tty after initial-setup format

2014-07-02 Thread Josh
4 19:41:06 -0500 > To: astlinux-users@lists.sourceforge.net > Subject: Re: [Astlinux-users] Can't Access tty after initial-setup format > > Hi Josh, > > I've personally never seen this, but such as that my advice is to boot into > the runnix shell... > > boot:

Re: [Astlinux-users] Can't Access tty after initial-setup format

2014-07-02 Thread Lonnie Abelbeck
Hi Josh, I've personally never seen this, but such as that my advice is to boot into the runnix shell... boot: shell Then try... == runnix# fdisk -l (just to see what is going on) runnix# e2fsck -y /dev/sda2 (ignore the missing mtab warning) If you still get the same error, ge

[Astlinux-users] Can't Access tty after initial-setup format

2014-07-02 Thread Josh
Hello, At the recommendation of John and Lonnie, I decided to install Astlinux 1.0-6575 to the internal flash storage on my Wyse R90L. I followed the instructions on the wiki. After using dd to zero the drive and copy the files, I can boot up and access the web interface. Everything seems