Hi Peter,
some things have changed between 16 and 18, there are now a few new modules,
that have no config files.
The 4 voicemail config changes could be adapted, but will still work as they
are.
> Am 22.03.2024 um 14:59 schrieb Dr. Peter Voigt :
>
> Hi Lonnie,
>
> thanks, that trick helped
Hi Lonnie,
thanks, that trick helped - I'm now on
"astlinux-1.5.3 x86_64 - Asterisk 18.20.2".
Good news: My simple configuration survived the upgrade: I can still make and
receive phone calls, voicemals are still
accepted an sent by email.
I am no Asterisk expert at all so need some advice on
Hi Peter,
What you need to do is first perform a "System tab -> "Revert to Previous"
Then (no need to reboot) perform an "Upgrade with New".
This will use your changed repository URL, and since the previous version is
different from the latest it will allow the upgrade.
Lonnie
> On Mar
Well, I have some time left and would like to upgrade to ast18.
I am currently on 1.5.3 of ast16se. I've just changed the repository URL
from https://mirror.astlinux-project.org/ast16se-firmware-1.x
to https://mirror.astlinux-project.org/ast18-firmware-1.x
and checked for new firmware (System ->
Hi Lonnie,
thanks for even more detailed advice. Looks like I should go path 3) and 3a).
Regards,
Peter
On Fri, 2023-11-17 at 15:03 -0600, Lonnie Abelbeck wrote:
> +1 what Michael said ... my thoughts.
>
> Given, currently using ast16:
>
> 1) If currently using chan_pjsip, migrate to ast18.
+1 what Michael said ... my thoughts.
Given, currently using ast16:
1) If currently using chan_pjsip, migrate to ast18.
2) If currently using dahdi (ex. pcie telephony card), migrate to ast18.
3) Else next step, change the "ast16" to "ast16se", ex.
--
Prefs -> System & Staff Tab Options:
Hi Michael,
thanks for feedback. I will try the upgrade to ast18 as soon as I've some time
left necessary to deal with obviously arising error messages and required
configuration changes. May be I'll have to contact the list again, if something
goes wrong.
On Fri, 2023-11-17 at 19:06 +0100,
Sorry.
Michael
http://www.mksolutions.info
> Am 17.11.2023 um 19:06 schrieb Michael Keuter :
>
> Hi Peter,
>
> it is just a matter of changing the repository URL (you must run a lower
> version).
>
> I would suggest you choose ast18 cause Asterisk is EOL now.
> 20 is not well tested yet,
Asterisk 16 is EOL now.
Michael
http://www.mksolutions.info
> Am 17.11.2023 um 19:06 schrieb Michael Keuter :
>
> Hi Peter,
>
> it is just a matter of changing the repository URL (you must run a lower
> version).
>
> I would suggest you choose ast18 cause Asterisk is EOL now.
> 20 is not
Hi Peter,
it is just a matter of changing the repository URL (you must run a lower
version).
I would suggest you choose ast18 cause Asterisk is EOL now.
20 is not well tested yet, it runs fine for me though.
There was much changed between 16 and 18 (a few missing new config files =>
error
I am currently on the ast16 branch and ask myself, if I should switch to ast16se
or to one of the higher version branches ast18/ast20.
And another question: Is upgrading just a matter of changing the repository URL
according to
https://doc.astlinux-project.org/userdoc:tt_asterisk_upgrade_version
11 matches
Mail list logo