Ok sounds good , My linux knowledge ain't that much that I've manually
recompiled a kernel before, is there a good recourse anyone can point me
too to read up on this particular action.
Many Thanks
On Wed, 2005-07-27 at 02:04 -0400, Phil Stracchino wrote:
> Philip Wege wrote:
> > thanks Guys
> >
Hello Jesse,
On Tue, 26 Jul 2005 13:32:37 -0700 Jesse Keating
<[EMAIL PROTECTED]> wrote:
> On Tue, 2005-07-26 at 13:21 -0700, Jesse Keating wrote:
> > Wait, I'm on to something here. The ssh process goes away almost
> > immediately when called by Run Before Job. If I run it myself it
> > stays
Philip Wege wrote:
> thanks Guys
>
> That was the problem got it fixed and is up and running.
>
> I was just wondering is a bare metal bacula restore hardware dependant
> or not ?
>
> IE : Can I restore a machine using 80 gb hdd to a new machine using a
> 120 gb hdd ? And if the cpu and motherb
Rushowr wrote:
> Am I asking just entirely idiotic questions or what? Two submissions
> today, both admitting I may have missed something, no answers. I'm not
> trying to be a jerk, but c'mon guys.
Nothing personal; it seems to have been a busy day for a lot of people,
myself included. (as you ca
thanks Guys
That was the problem got it fixed and is up and running.
I was just wondering is a bare metal bacula restore hardware dependant
or not ?
IE : Can I restore a machine using 80 gb hdd to a new machine using a
120 gb hdd ? And if the cpu and motherboard and ram on new machine is
not t
Onsdag 27. juli 2005 05:27, skrev Rushowr:
> Am I asking just entirely idiotic questions or what? Two submissions today,
> both admitting I may have missed something, no answers. I'm not trying to
> be a jerk, but c'mon guys.
I am pretty sure you are not beeing ignored. People on the list here is
Am I asking just
entirely idiotic questions or what? Two submissions today, both admitting I may
have missed something, no answers. I'm not trying to be a jerk, but c'mon guys.
On Tue, 26 Jul 2005, Jesse Keating wrote:
After all the backups in a given week occur, I'd like to automatically
mark the last tape used as full, so that the next set of backups uses a
new clean tape. Is there a way to do this?
Kick off a nice big render? ;-)
If you have an autoloader you ca
Dear all:
Bacula Director had a error when It has full Backup. What is the problem. Thank you.
backup-dir: Start Backup JobId 4755, Job=ndnsdb2.2005-07-27_04.05.07> backup-sd: Created Volume label Backup on device /backup/ndnsdb2.> backup-sd: Wrote label to prelabeled Volume Backup on device > /
On Tue, 2005-07-26 at 16:50 -0700, Karl Cunningham wrote:
>
> Jesse --
>
> It may be that since you are not logged in to the system on which the
> tunnel is being opened the operating system closes it as soon as the script
> exits. You may need to invoke the tunnel with nohup or something simila
--On Tuesday, July 26, 2005 2:06 PM -0700 Jesse Keating
<[EMAIL PROTECTED]> wrote:
> On Tue, 2005-07-26 at 21:44 +0100, Martin Simmons wrote:
>> Strange. The use of the -N option to ssh is supposed to make it wait.
>> Maybe there is a problem with which user is running ssh?
>
> Well, bacula is r
Joshua Kugler wrote:
We recently purchases a Coraid Etherdrive, and I have set up a 5TB RAID5 array
that I am going to use for storing Bacula volumes. I always used ext3, but I
know it's not always the most efficient, especially because it doesn't have
dynamic inode allocation, and since these
After all the backups in a given week occur, I'd like to automatically
mark the last tape used as full, so that the next set of backups uses a
new clean tape. Is there a way to do this?
--
Jesse Keating
GameHouse -- Systems Engineer
---
SF.N
George R. Kasica wrote:
> OK, I can do that.with one set of questions on the Save steps and
> the Upgrade stephow do I go about those, I'm guessing upgrade
> database is the binary on the /bacula/bin directory but what am I
> copying to save it all in terms of database and Bacula??
Bacula'
Maybe I
missed it in the documentation. Can you specify multiple filesets for a
job?
On Tuesday 26 July 2005 21:57, Phil Stracchino wrote:
> Kern Sibbald wrote:
> > 3. Recently, I spent $7,800 to purchase a two drive autochanger
> > that I don't personally need, but is important for the Bacula
> > project. These kinds of "contributions" are too important for me, so I am
> > now
Hello together,
I was watching also this thread, due to my plans to take bacula in a
productive system. Anyway the behaviour of bacula on moved files seems to be
odd.
I've written a small script to analyse the situation on a debian sarge.
Here we go...
- begin: my test script
On Tuesday 26 July 2005 22:11, George R. Kasica wrote:
> >On Tue, 26 Jul 2005 15:48:08 +0200, you wrote:
> >
> >You don't by any chance have a lot of hard links on your system do you?
> > Or run or have run BackupPC?
>
> If you're referring to symlinks, no, none at all in the directory That
> it b
On Tue, 2005-07-26 at 21:44 +0100, Martin Simmons wrote:
> Strange. The use of the -N option to ssh is supposed to make it wait. Maybe
> there is a problem with which user is running ssh?
Well, bacula is running as root, and I was doing my tunnel testing as
root. It seems from the console outpu
> On Tue, 26 Jul 2005 13:32:37 -0700, Jesse Keating <[EMAIL PROTECTED]>
> said:
Jesse> On Tue, 2005-07-26 at 13:21 -0700, Jesse Keating wrote:
>> Wait, I'm on to something here. The ssh process goes away almost
>> immediately when called by Run Before Job. If I run it myself it
On Tue, 2005-07-26 at 13:21 -0700, Jesse Keating wrote:
> Wait, I'm on to something here. The ssh process goes away almost
> immediately when called by Run Before Job. If I run it myself it
> stays
> running. Thoughts?
>
And I'll reply to myself one more time. In fact, if i call the ssh
scrip
On Tue, 2005-07-26 at 13:18 -0700, Jesse Keating wrote:
>
> This is very strange. The backup job kicks off the ssh script, which
> supposedly opens all the tunnels. The client however is never able to
> connect to 'localhost:9103' as seen by logs:
Wait, I'm on to something here. The ssh proces
On Thu, 2005-07-21 at 22:50 +0200, Mario Ohnewald wrote:
> On Thu, 2005-07-21 at 21:34 +0100, Martin Simmons wrote:
> > > On Thu, 21 Jul 2005 20:15:43 +0200, Mario Ohnewald <[EMAIL
> > > PROTECTED]> said:
> >
> > Mario> On Thu, 2005-07-21 at 18:58 +0100, Martin Simmons wrote:
> > >> >
On Tue, 2005-07-26 at 11:58 -0700, Jesse Keating wrote:
>
> So I tried this, and same thing. Looks like the ssh tunnel gets
> started, and the client gets the word to start a backup, however it just
> hangs when trying to contact the sd. Thoughts?
>
This is very strange. The backup job kicks
Kern Sibbald wrote:
> 3. Recently, I spent $7,800 to purchase a two drive autochanger
> that I don't personally need, but is important for the Bacula project.
> These kinds of "contributions" are too important for me, so I am now
> considering a funding plan for Bacula based on an idea
I searched the archives at gmame and didn't find anything, so hopefully I'm
not asking a common question.
We recently purchases a Coraid Etherdrive, and I have set up a 5TB RAID5 array
that I am going to use for storing Bacula volumes. I always used ext3, but I
know it's not always the most ef
On Tuesday 26 July 2005 21:08, Paul Store2 wrote:
> My first time posting here. I could really use your help.
>
> Question for Bacula and Tape library
>
> I have Exabyte VXA-2 PacketLoader 1x10 1U Autoloader that I'd like to
> use with Bacula 1.36.3 on Fedora Core 3.
Oops. If you are using 1.36.3
I have the same hardware on RH9, here is my bacula-sd config.
Device {
Name = "Autochanger"
Media Type = VXA2
Archive Device = /dev/nst0# Normal archive device
Changer Device = /dev/sg0 # Generic SCSI device name
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Autoc
> On Mon, 25 Jul 2005 16:09:59 -0600, Tony Lambregts <[EMAIL PROTECTED]>
> said:
Tony> On 7/22/05, Martin Simmons <[EMAIL PROTECTED]> wrote:
>> > On Wed, 20 Jul 2005 12:15:23 -0600, Tony Lambregts <[EMAIL
PROTECTED]> said:
>>
Tony> I have ACL's working on our FreeBSD Server
My first time posting here. I could really use your help.
Question for Bacula and Tape library
I have Exabyte VXA-2 PacketLoader 1x10 1U Autoloader that I'd like to
use with Bacula 1.36.3 on Fedora Core 3.
Currently Bacula is configured to backup data to HD and that's working
fine. I can run t
On Tuesday 26 July 2005 13:51, Kern Sibbald wrote:
> Hello,
>
> I have four items to mention in this email:
>
> 1. Version 1.38.0 is now essentially ready. Unless some unforeseen
> event occurs, I'll be releasing it in the next couple of weeks.
> Testers are urgently needed.
This is great!
Featur
Here's a script that I use to determine available tapes as well as
tapes that are in the changer. It's not very pretty (I've been meaning
to put it into php when I have the time) but it is functional.
The get_tapes.sh script calls the get_tapes.sql file to query the
bacula database and sends the
On Tue, 2005-07-26 at 19:36 +0100, Martin Simmons wrote:
> Yes. See
> http://www.bacula.org/rel-manual/Using_Bacula_Encryp_Commun.html
> (although this talks about stunnel, the same kind of Bacula
> configuration
> issues will apply to ssh-tunnel.sh).
So I tried this, and same thing. Looks like
> On Tue, 26 Jul 2005 11:12:31 -0700, Jesse Keating <[EMAIL PROTECTED]>
> said:
Jesse> So here is my situation. I have a set of remote servers that I'd like
Jesse> to backup. I can ssh to these servers from the bacula-dir (which is
Jesse> also the bacula-sd) however these servers
So here is my situation. I have a set of remote servers that I'd like
to backup. I can ssh to these servers from the bacula-dir (which is
also the bacula-sd) however these servers cannot ssh back to bacula.
(nat is involved). I've been playing w/ the ssh-tunnel.sh script as it
seems to create a
On Tue, 2005-07-26 at 10:14 -0700, Jesse Keating wrote:
>
> This script seems to need to be ran on the director and not the client.
> Is there a method to have a 'RunBeforeJob' run on the director rather
> than the client? I don't want these tunnels up all the time, just when
> I'm doing a backup
Josh Fisher wrote:
> I can confirm that version 6.39 of the nVidia nForce4 chipset (for
> AMD64) drivers causes this problem and that installing version 6.66
> fixes the problem with the Gigabyte GA-K8N Ultra-9 motherboard. That
> leads me to believe it is a bug in the version 6.39 XP driver and no
This script seems to need to be ran on the director and not the client.
Is there a method to have a 'RunBeforeJob' run on the director rather
than the client? I don't want these tunnels up all the time, just when
I'm doing a backup of remote systems.
--
Jesse Keating
GameHouse -- Systems Enginee
I can confirm that version 6.39 of the nVidia nForce4 chipset (for
AMD64) drivers causes this problem and that installing version 6.66
fixes the problem with the Gigabyte GA-K8N Ultra-9 motherboard. That
leads me to believe it is a bug in the version 6.39 XP driver and not a
hardware flaw.
Jo
On Thursday 21 July 2005 15:08, Theron Toomey wrote:
> Theron Toomey wrote:
> > I have done both but I don't see any critical errors. But then again,
> > maybe I am missing something. I didn't have time to run a multitape fill
> > test but I plan on trying it later. As recommended, I turned off
> >
On Tuesday 26 July 2005 04:10, Theron Toomey wrote:
> Hi, thanks for the suggestions. Sorry it took me a few days to respond-
> there's not much time for testing between daily backup cycles.
>
> My current theory is that there is some strange corruption in my DB,
> perhaps in the File table.
>
> I'
It is a great news and a bigger job.
Thanks Kern.
El Martes 26 Julio 2005 17:31, Kern Sibbald escribió:
> Hello,
>
> We now have a Bacula-web manual. It is in the docs CVS as well as on the
> Web site. For the moment, it is rather elementary and needs a lot of work,
> but the base is there, and
Hello,
We now have a Bacula-web manual. It is in the docs CVS as well as on the Web
site. For the moment, it is rather elementary and needs a lot of work, but
the base is there, and I'll add to it over the coming weeks.
You can view it online from the Documentation page on the web site or
go d
As a quick note, I DID use multiple run lines with the
incremented times, but I was wondering if there was a way to specify in a
similar way to "hourly" or "daily"
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
RushowrSent: Tuesday, July 26, 2005 9:47 AMTo:
ba
You don't by any chance have a lot of hard links on your system do you? Or
run or have run BackupPC?
If so, try using 1.37.30 and set "Hardlinks = no" in your Options and see if
that improves performance. If so, let me know. Otherwise, perhaps Phil can
find something.
...
On Sunday 24 July
Anyone care to
enlighten me on how I might designate a schedule resource to run every XX hours?
I have a every 2 hours planned, and a every 4 hours planned, and was hoping NOT
to have to specify every hour that it runs. Is there a keyword that I'm
missing?
Philip Wege wrote:
> Hi
>
> Just got bacula read the install instructions , I keep on getting this
> error even when mysql is running.
>
> configure: error: Unable to find mysql.h in standard locations
>
> I can't find any reference to an error like this in the documentation.
> Also the file mys
Hi,
Ryan Novosielski wrote:
This one seems wrong to me, but then again my copy has been acting a
little funny anyway (things that are deleted sometimes require a restart
of bacula, not just a reload, to disappear)... anyways, observe the
following:
Job {
Name = "NJMSCatalyst"
...
Pool
Make sure you have the MySQL devel packages installed.
-
Thank you,
Grant Della Vecchia
System Administrator
--
AIS Media, Inc.
7000 Central Parkway, Suite 1700
Atlanta, GA 30328
Tel: 770.350.7998 ext. 506 | Fax: 770.350.9409
Hello,
I have four items to mention in this email:
1. Version 1.38.0 is now essentially ready. Unless some unforeseen event
occurs, I'll be releasing it in the next couple of weeks. Testers are
urgently needed.
2. The Bacula project needs two Microsoft Visual Studio .NET 2003 licenses.
Hi
Just got bacula read the install instructions , I keep on getting this
error even when mysql is running.
configure: error: Unable to find mysql.h in standard locations
I can't find any reference to an error like this in the documentation.
Also the file mysql.h does not excist on the box which
If you guys don't mind, let me know if you find out a reason why the
throughput is so low, as it may be the same problem on my servers. I would
offer access to my systems as well but the company I work for says no can do
on that.
Thanks
->-Original Message-
->From: [EMAIL PROTECTED]
->[
On Tue, 26 Jul 2005, Roland Arendes wrote:
The 'status dir' output is a good guess anyway, if I remember correctly.
It only shows the guess for the next tape.
A lot of us need to know the next 5, 10, whatever tapes to insert in a
magazine.
This one seems wrong to me, but then again my copy has been acting a
little funny anyway (things that are deleted sometimes require a restart
of bacula, not just a reload, to disappear)... anyways, observe the
following:
Job {
Name = "NJMSCatalyst"
Type = Backup
Client = catalyst-fd
Fi
>On Mon, 25 Jul 2005 13:48:09 -0400, you wrote:
>Well, it doesn't look as though anything there would not be expected to
>be up to the task there must be something going on that's not
>immediately apparent, but without poking around the system by hand, I
>don't have any particular ideas of w
On Mon, 25 Jul 2005, Alan Brown wrote:
The script default is 15 seconds.
More tests showed the problem.
A formatted (erased or written) LTO2 tape loads in 14 seconds.
An unformatted (new blank) LTO2 tape loads in 16
Clearly this is long enough if the tape has something on the start, but not
After about 10 minutes, the tape was rewound and labelled.
Either you are not waiting long enough after issuing the mtx load
command, or you are not using one of the wait loops that are in the
mtx-changer script. As a consequence, the mtx-changer script returns to
Bacula *before* the tape is
On Mon, 25 Jul 2005, Kern Sibbald wrote:
What kind of output/debugging do you need to analyse and detect virgin
blank tapes?
I don't know of any way to detect blank media. If you know how, using
standard Unix system calls, please fill me in. In fact, there is
generally, no universal Unix me
Roland Arendes wrote:
> The 'status dir' output is a good guess anyway, if I remember correctly.
>
> Nevertheless, I would be interested in this information, too.
>
> Right now I need this for one machine, but it is not as critical as your
> situation. We insert the tape on the next day then, an
Samuel Olampi wrote:
> - Incremental of every servers every night (done on a tape)
> - Differential of every servers every *hour* (yes!) (done on disks)
I suspect you have these two backwards.
> Size should not be an issue, as I have a set of more than 100 blank
> tapes. I'd like to recycle the d
The 'status dir' output is a good guess anyway, if I remember correctly.
Nevertheless, I would be interested in this information, too.
Right now I need this for one machine, but it is not as critical as your
situation. We insert the tape on the next day then, and the backup runs
during the day.
Dear all,
I recently came to use Bacula and am amazed by all the things
that can be done with this fine piece of software.
Almost too much, indeed, as I am a little bit lost and
would like to have some expert's point of view on my setup !
As a background for my question, let me present my backup
On Tuesday 26 July 2005 00:52, Phil Stracchino wrote:
> Jesse Keating wrote:
> > Is it possible to encrypt the data that goes onto tape? We're going to
> > send our tapes off-site and just to minimize possibility of data leaks
> > we would like to encrypt the data that goes offsite. Can Bacula do
63 matches
Mail list logo
