e
> precisely the lack of control the user has from bconsole to manipulate Copy
> volumes. Perhaps some additional future code could make situations like
> yours easier to manage.
>
> Perhaps someone else has a good idea to solve this problem.
>
> Best regards,
> Kern
>
>
&
:
>
> On 12/11/2018 1:09 AM, Jerry Lowry wrote:
>
> Well, The raid was (8) 6TB disks attached to an ATTO Tech raid controller
> in a supermicro cabinet. It was setup as a raid-5 disk array. The ATTO
> support group know how it was configured as they have been helping me since
> Thur
array
from the offsite disks from the most recent offsite backups. Will any of
the bacula utilities enable me to do this?
Thanks,
jerry
On Mon, Dec 10, 2018 at 6:01 PM Phil Stracchino
wrote:
> On 12/10/18 7:44 PM, Jerry Lowry wrote:
> > Hi,
> > Last thursday I was adding a dis
Hi,
Last thursday I was adding a disk to the bacula raid array when the system
decide to fail. When it rebooted my raid array was gone. This raid was
where all of my daily backups were held, which is where I do my offsite
backups from. The database is fine, catalog is in working order. I
rebuilt
Hi,
I am trying to build bacula 9.2 with Qt 5. The configure is failing to
find Qt directories. I have these defined:
QTINC=/usr/local/Qt/5.11.1/gcc_64/include/QtGui
QTDIR=/usr/local/Qt/5.11.1/gcc_64
I have tried a number of different iterations of these but they all fail.
What is the
Hi,
I had to rebuild the domain a couple weeks ago. Everything works for Bacula
except for two systems. One is a log server and the other is my work
station. Both are getting the same errors. I am not sure why because all
of the other systems in the domain are being backed up without any
Hi,
Each time I have to change a disk during my offsite backups I get errors
from the job that is running and it fails. My storage and pool definitions
follow below, they have not changed for the last 10 years and have been
working without any error or problems up until I upgraded to 9.0.3 of
u could try
>
> telnet distress 9103
>
> on the client machine to see if that can connect (see
> https://technet.microsoft.com/en-us/library/cc771275(v=ws.10).aspx).
>
> __Martin
>
> >>>>> On Fri, 12 Jan 2018 10:32:10 -0800, Jerry Lowry said:
9.0.6
thanks
On Thu, Jan 11, 2018 at 2:08 PM, Jerry Lowry <michaiah2...@gmail.com> wrote:
> Dan,
> Yes, bacula did not change at all. This bacula server is both director and
> storage. All of the clients are windows systems running the latest 64 bit
> release of community clien
Hi, Last weekend I ran through a bunch of updates for my backup server.
Of the many updates it updated the kernel and MariaDB ( 10.2.8 -> 10.2.12
). I have recently upgraded bacula to 9.0.6. The problem is that the
following error:
10-Jan 20:36 distress-dir JobId 34724: Fatal error: Bad
Hi,
I ran the update over the weekend and it updated the kernel and mariadb as
well as many others. Bacula is not connecting to the storage daemon now.
Can someone tell me what the following error means:
Fatal error: Bad response to Storage command: wanted 2000 OK storage, got
2902 Bad storage
I spent a couple days over the last week upgrading a bacula server from
centos 6.9 to 7.3 and bacula from 9.0.3 to 9.0.6.
The backup jobs are working just fine, but the offsite job is failing with
the following error:
03-Jan 14:12 distress JobId 34620: Volume "dcBS-105" previously written,
moving
storage server, well actually two storage
servers but they
service two different subnets/domains. It all started with the upgrade!
please, tell me that you have fixed this with a new version!
thanks
On Mon, Nov 27, 2017 at 7:45 AM, Jerry Lowry <michaiah2...@gmail.com> wrote:
> list,
>
list,
bacula 9.0.3
mariadb 10.2.8
centos 6.9
I upgraded bacula from 5.2.13 which worked very well, to version 9.0.3.
Basically installed new version from source and then upgraded the database
structure. The source was compiled with the following:
./configure --sbindir=/usr/bacula/bin
stem that causes networking to
> be
> disrupted in some subtle way, causing "Connection reset by peer" when the
> connection is closed cleanly?
>
> __Martin
>
>
> >>>>> On Tue, 19 Sep 2017 15:31:46 -0700, Jerry Lowry said:
> >
> >
of data and at the time I didn't have the space to backup multiple days of
data.
I think it's time to watch some system resources on the FD.
Thanks,
On Thu, Sep 21, 2017 at 4:51 AM, Josh Fisher <jfis...@pvct.com> wrote:
>
> On 9/20/2017 2:15 PM, Jerry Lowry wrote:
>
>> Hi,
>
Hi,
I have just started encrypting my backup jobs. I have one full backup that
went from completing in
Scheduled time: 12-Aug-2017 20:05:00
Start time: 13-Aug-2017 06:16:47
End time: 13-Aug-2017 15:26:35
Elapsed time: 9 hours 9 mins 48 secs
to
gt; Do you have the corresponding email from the reading side? It will have a
> different JobId (but should mention JobId 35203) and should start with
> something like "Using Device ... to read."
>
> __Martin
>
>
> >>>>> On Mon, 18 Sep 2017 13:42:19 -0700,
No, the only thing that shows in the messages file is that I changed the
disk 3 times as they filled up.
jerry
On Wed, Sep 13, 2017 at 10:51 AM, Josip Deanovic <djosip+n...@linuxpages.net
> wrote:
> On Wednesday 2017-09-13 09:35:07 Jerry Lowry wrote:
> > Kern,
> > My Offsi
ting
> restores on your system.
>
> Best regards,
>
> Kern
>
> On 09/06/2017 05:38 PM, Jerry Lowry wrote:
>
> List,
> I am running, bacula 9.0.3, Mariadb 12.2.8 on Centos 6.9. I got notice
> last night that my Offsite backup failed due to a bsock error. My o
List,
I am running, bacula 9.0.3, Mariadb 12.2.8 on Centos 6.9. I got notice
last night that my Offsite backup failed due to a bsock error. My offsite
drives are attached to an ATTO raid card which gives me hot swap
capability. This configuration works great as it allows me to hot swap a
drive
no <ph...@caerllewys.net>
wrote:
> On 09/01/17 19:10, Jerry Lowry wrote:
> >
> > I am running 5.6.28 on one of my updated servers. Once I updated the
> > bacula database and got it all running. I tried to start a job and it
> > failed with this error. Do you know if it is 5.6
Hi,
I finally got my backup server upgraded to 9..0.3. I have run the database
update and it succeeded with out any errors. But I get this error any time
I start a job:
01-Sep 00:20 kilchis-dir JobId 0: Fatal error: sql_create.c:84 Create DB
Job record INSERT INTO Job
That is correct it is not BAT
to solve this check out this:
https://github.com/marazmista/radeon-profile/issues/8
thanks,
jerry
On Thu, Aug 31, 2017 at 8:17 AM, Phil Stracchino <ph...@caerllewys.net>
wrote:
> On 08/31/17 10:37, Jerry Lowry wrote:
> > List,
> > So I i
List,
So I installed qt as Heitor suggested. compiles just fine. But when I run
bat I get a blank screen with the following output on the terminal window:
[root@tech bin]# ./bat
X Error: BadAccess (attempt to access private resource denied) 10
Extension:131 (MIT-SHM)
Minor opcode: 1
List,
I am still trying to resolve my 9.0.3 install from a week or so ago. I
have had to rebuild the server due to numerous problems. I am using the
same configure command that I have in the past.
Centos 7 bld 1611 , mariadb 5.5.52
./configure --sbindir=/usr/bacula/bin
ution
> is to find and remove all bconsoles that are not the one installed for
> 9.0.3.
>
> Best regards,
> kern
>
>
>
> On 17/08/2017 17:25, Jerry Lowry wrote:
>
> Hi list,
> I am getting ready to upgrade from 5.2.6 to 9.0.3. I have install 9.0.3
> from source
Hi list,
I am getting ready to upgrade from 5.2.6 to 9.0.3. I have install 9.0.3
from source on a test system and move the bacula database over using
mysqldump. Upgraded the database to version 16 and set all the
permissions. Everything looks good until I run bconsole.
When I run bconsole I get
I installed bacula version 5.2.13 and I am having trouble with getting bat
to compile. What version of qt is this version of looking for?
thanks
jerry
--
___
Bacula-users
t; again, and it will probably work. On the other hand if you want lzo
>> compression (possibly used for the mysql client interface, then you must
>> make sure the lzo development libraries are loaded on your system.
>>
>> Best regards,
>> Kern
>>
>>
>
List,
I am setting up a test server for bacula and I am getting the following
error:
Making libbaccats-mysql.la...
/usr/local/bacula-5.2.13/libtool --silent --tag=cxx --mode=link
/usr/bin/g++ -D_BDB_PRIV_INTERFACE_ -o libbaccats-mysql.ls mysql.lo
-export-dynamic -rpath /usr/lib64 -release
d luck with recovering your catalog.
>
> Regards
>
> Davide
>
> On May 16, 2016 05:45, "Jerry Lowry" <michaiah2...@gmail.com> wrote:
> >
> > Hi all,
> >
> > I am just finished recovering a system disk boot failure on one of my
> backup ser
Hi all,
I am just finished recovering a system disk boot failure on one of my
backup servers. It is running Centos (6.6/6.7 now); Mysql 5.6.28/5.6.30
(now) and Bacula 5.2.13.
Fortunately the system disk did not die, just some boot problem and I could
tell that it was not spinning like it should.
Hello, I have unfortunately relabel one of my offsite backup disks using
‘parted’. I would like to go back and recopy the jobs that were on it. Is
there a way to reset the copy flag in the database for these specific jobs?
Thanks for the help!
Hi,
Centos 5.11 64bit OS
Bacula 5.2.6 on all directors and clients
I have run across a problem with one of my copy jobs. The job is setup
with the PoolUncopiedJobs parameter. The jobs are failing with the
following:
30-Oct 11:05 distress JobId 28325: Error: block.c:291 Volume data
error at
started an offsite yesterday and found this morning that I have been
getting the following error:
23-Sep 10:52 kilchis JobId 28178: Error: block.c:1045 Read error on fd=5 at
file:blk 23:3783749357 on device "Hardware" (/Hardware). ERR=Input/output
error.
23-Sep 10:52 kilchis JobId 28178: Error:
Maziuk dmaz...@bmrb.wisc.edu
wrote:
On 2015-08-08 14:23, Jerry Lowry wrote:
Heitor, Sorry for not saying this in the original text. It does the
same thing when I specify 'localhost'.
I don't really need 'tls' that is just what gmail is looking for when I
try to use them as the sending mail
Heitor, Sorry for not saying this in the original text. It does the same
thing when I specify 'localhost'.
I don't really need 'tls' that is just what gmail is looking for when I try
to use them as the sending mail server.
thanks
On Sat, Aug 8, 2015 at 5:16 AM, Heitor Faria
All,
I have recently setup two separate bacula servers on two subnets. They
were using one server and going through the firewall for one of the
subnets. The previous configuration worked well but for security reasons
and speed I separated them.
Along with this change the company decided to move
hello list,
I am hoping you can help me solve this.
I have one director and to storage servers. Both storage servers have
disks attached but only one sd has a tape drive. The tape drive is not on
the director. I need to load some old tapes into the database but when I
run bscan from the sd
Hello,
I just ran into a problem with one of my offsite disks. After rebooting
the storage director one of my disks that I run a copy job to became
corrupt. I would like to know if there is a way to recreate the copy
job with the same jobs so that I don't lose any data. The job that was
Hi, I move the DIR/SD to a new motherboard and linux version. Before
it was running FC 14 and now it is running Centos 5.7. The motherboard
was an upgrade that was much needed.
I am using the configure script that was used previously to build Bacula
( it was also used to build a test
On 10/10/2011 04:51 PM, jerry lowry wrote:
Hi, I move the DIR/SD to a new motherboard and linux version. Before
it was running FC 14 and now it is running Centos 5.7. The
motherboard was an upgrade that was much needed.
I am using the configure script that was used previously to build
I have a similar setup. Can you add a rule in the firewall that will
allow the FD access to the SD. That's what I did in order to get my
backups to work.
On 6/20/2011 9:11 AM, Kevin O'Connor wrote:
My setup is as follows:
Bacula Server (DIR, SD) - Firewall/NAT - Server to be backed up
Hi,
I just have a quick question regarding the migration of jobs. If I have
migrated jobs to another volume that I have sent off site can I delete
the original volume if all the jobs on that volume have been migrated?
Trying to clean up some volume names that have been miss labeled is
Hi,
I am trying to utilize the bcopy utility to copy corrupt volumes to new
volumes that I can bscan into bacula. I look at the documentation and
it does not say whether I need to create new volumes in bacula or not, I
assume I do. But, the docs say that the new volume is not recorded in
of the
volume I think I should be okay. Will just have to be more intelligent
in my configuration of volumes and storage.
Thanks
On 5/13/2011 2:25 AM, Martin Simmons wrote:
On Thu, 12 May 2011 09:58:14 -0700, Jerry Lowry said:
thanks for the help. Looks like I have some digging to do to figure
or will it go by the wayside once the volume recycles? Just
curious as to whether I should drop the corrupt volumes ( files ) and
create new ones.
On 5/12/2011 12:31 AM, Graham Keeling wrote:
On Wed, May 11, 2011 at 02:06:44PM -0700, Jerry Lowry wrote:
another mistake on my part. You have to give bls
Is there anyone that can help me with this problem? Surely someone is
using the migration job.
On 5/9/2011 2:51 PM, jerry lowry wrote:
Hi,
I am frequently getting errors on my migration jobs and I need some
help trying to figure out what the problem is.
I have three migration jobs
, Jerry Lowry wrote:
Is there anyone that can help me with this problem? Surely someone is
using the migration job.
I'm not using migration jobs, but maybe I can give you a hint...
On 5/9/2011 2:51 PM, jerry lowry wrote:
09-May 13:59 distress-sd-sd JobId 2549: Forward spacing Volume hardware
on the system where
the 'director' is or on the system thats running the stand alone 'sd'
where the volume is located?
thanks
On 5/11/2011 9:32 AM, Graham Keeling wrote:
On Wed, May 11, 2011 at 09:19:49AM -0700, Jerry Lowry wrote:
I have not tried to restore from that particular job as yet
-sd.conf in the current directory.
Device {
Name = Home
Media Type = File
Archive Device = /Home
LabelMedia = yes;
Random Access = yes;
AutomaticMount = yes
Removable Media = no;
AlwaysOpen = no;
}
On 5/11/2011 10:48 AM, Jerry Lowry wrote:
Ok, I am trying to run bls
a
message asking me to mount the disk, which is already mounted according
to the director, as well as being mounted by the OS.
On 5/11/2011 11:26 AM, Phil Stracchino wrote:
On 05/11/11 13:48, Jerry Lowry wrote:
Ok, I am trying to run bls on the specified volume file that is
associated with this job
:318 Volumne data error at 0:206!
Block checksum mismatch in block=6010112 len=64512: calc=c6a6912d
blk=50a7d773
I ran this again with debug at level 200. I have attached the file with
the output.
thanks for all your help!
On 5/11/2011 12:11 PM, Jerry Lowry wrote:
Hi,
No, the migration job
Hi,
I am frequently getting errors on my migration jobs and I need some help
trying to figure out what the problem is.
I have three migration jobs that migrate data from a daily disk to a
raid disk that is setup as a hotswap disk. Once this is full I pull the
disk and move it to an offsite
Hi List,
I have a migrate job setup that will move job id's to an offsite disk
based on pool time. This has been working on some of the job id's but
on some I have gotten a couple of errors: Volume data Block checksum
mismatch and Volume data error at 13:2932697021! wanted id: BB02 got
will then start and run one migration backup job
for each of the Jobs found
on this Volume. The Selection Pattern, if specified, is not used.
If the above is true(in red) will the copy job go to the next volume to
complete the jobid from the oldest volume?
jerry
On 3/30/2011 2:20 PM, jerry lowry wrote
Hello list,
I have setup a copy job that will copy with a 'selection type = oldest
volume' to a hot swapable disk so that I can move it offsite. The job
worked just fine up until it got to the end of the from volume, then it
failed. My question is: If it hits the end of the volume will it
Engineer
Engineering Design Team (EDT), Inc. a HEICO company
1400 NW Compton Drive, Suite 315
Beaverton, Oregon 97006 (U.S.A.)
Phone: 503-690-1234 / 800-435-4320
Fax: 503-690-1243
Web: _www.edt.com http://www.edt.com/_
On 1/11/2011 9:12 AM, jerry lowry wrote:
I really hate when I do
Hi list,
I came in this morning and found that my director had died last night
after doing two of the backups. The traceback follows at the end.
This is the scenario:
I noticed yesterday that the only two jobs that were scheduled to
be performed last night were a monthly backup and the
0x in ?? ()
No symbol table info available.
#0 0x in ?? ()
No symbol table info available.
#0 0x in ?? ()
No symbol table info available.
Original Message
Subject:Director crash
Date: Tue, 11 Jan 2011 09:11:17 -0800
From: jerry
On 7/29/2010 1:46 PM, Dan Langille wrote:
On 7/29/2010 11:21 AM, Carlo Filippetto wrote:
Hi all,
I have a problem when I do FULL backup on all the server in DMZ. this
jobs stops with the error Network error with FD during Backup:
ERR=Connection reset by peer
I have configured the
Well, the difference between the system is only about 7 minutes, so I
don't think that would cause it.
Any other ideas? I don't want to lose anything at some point down the
road. We were able to get past it this time.
jerry
Doug Forster wrote:
Jerry,
I would check your backup server to
I need to restore a directory from last nights backup. I have the
restore running but it is waiting to mount the volume.
when I try to mount the volume, I can only mount the storage volume
File1 not the volume hardware-0047 that is on this disk.
I need this quickly, so any help would be
the error was
when I tried the mount in bconsole.
thanks
Jerry Lowry wrote:
I need to restore a directory from last nights backup. I have the
restore running but it is waiting to mount the volume.
when I try to mount the volume, I can only mount the storage volume
File1 not the volume
,
jerry
Craig Ringer wrote:
On 14/04/10 00:19, Jerry Lowry wrote:
I also get an error saying that it can not create a directory on the
same disk for the same reason ERR= No space left on device. But I
think this is the same type of error.
Betcha you've run out of free inodes on the target
of error.
Still no joy in restore.
thanks
Craig Ringer wrote:
On 13/04/10 05:15, Jerry Lowry wrote:
Hi, I am still tweaking a new installation of bacula 5.0.1 on Centos
5.4. The backups work fine but I am trying to get the restore to work
and I keep getting the following errors:
Volume hardware
/hardware/pdf/rca/sarah.tv.pdf: No space left on
device
thanks,
jerry
Martin Simmons wrote:
On Tue, 13 Apr 2010 09:19:11 -0700, Jerry Lowry said:
Craig,
The file systems are definitely not full, especially /backup0. The disk
backup is on the /backup1 volume, it size is below
it says 'waiting on storage 'File1' and yet it is running?
jerry
Ralf Gross wrote:
Jerry Lowry schrieb:
Martin, I am trying to restore the files to the file system on the
bacula server. The client 'swift-fd' definitely does NOT have room on
the disk to restore all the pdfs. That is why
Hi, I am still tweaking a new installation of bacula 5.0.1 on Centos
5.4. The backups work fine but I am trying to get the restore to work
and I keep getting the following errors:
Volume hardware-0014 to file:block 7:2933114700.
10-Apr 12:51 swift-fd JobId 118: Error: restore.c:1133 Write
On 4/10/2010 3:30 AM, Jon Schewe wrote:
On 04/08/2010 07:04 AM, Matija Nalis wrote:
On Wed, Apr 07, 2010 at 02:15:14PM +0100, Prashant Ramhit wrote:
b06-Apr 12:54 client-fd JobId 299: Fatal error: backup.c:892 Network send
error to SD. ERR=Connection reset by peer/b/small/pre
Hi,
I have a new installation that I am tweeking the backups on. One of my
backups goes through the firewall from an public ip address to where the
backup server is on an private ip address. The backup works just fine
for the first 2h 11m 15s and then it fails. After the first test failed
I found the problem. The director had the tape devices defined with the
'Autochanger' commented. The storage director had the 'Autochanger'
uncommented and set to 'yes'. Commented out the 'Autochanger' in the sd
and it works just fine.
See I knew it was easy.
Jerry Lowry wrote:
I am
I am setting up a new installation and I am having difficulty with the
tape drive not being seen. Here is the error message:
Job=TapeBackup.2010-03-11_14.34.23_05
11-Mar 14:34 distress-dir JobId 20: Fatal error:
Storage daemon didn't accept Device Drive-2 command.
11-Mar 14:34 distress-dir
ok, I have bacula installed without openssl and without bat. But I would
like to use bat for management of bacula.
QT make problem:
When I run the qt make I am getting errors from the openssl modules. I
went looking through the configure files in the qt directory but did not
see anything that
That would work but it really is a pain to get all the dependent
software working with the old version. I really don't use ssl for my
backups so just turning off the openssl for qt would be fine.
thanks
Hugh Brown wrote:
Jerry Lowry wrote:
Hi, I am trying to install bacula 5.0.1
Hi, I am trying to install bacula 5.0.1 on a new backup server. I have
attached the error that I am getting during the make and the
config.out. The server configuration is:
fedora 12 x86_64
mysql 5.1.42
bacula src 5.0.1
Any ideas as to why this is failing? Also, if I include 'enable-bat'
I have been trying to add another tape drive to my server. These are not in
an autochanger, they are separate tape drives. I can access the tape drive
from
Linux with mt and as you will see in the documentation below btape worked as
well. But when I try to access the tape from bacula it does
I am setting up several new workstations on my backup schedule. I am running
bacula 2.0.3 on both server and clients. I copied a working configuration in
the bacula-dir.conf to create the new workstation configurations but each one
of them is getting the following error:
**note*** the words
79 matches
Mail list logo
