Hi,
I'm new to bacula and I'm using LTO 5 of 1,5 TB uncompressed to backup.
The thing is that I only can get it to write 50GB and it sets to full.
The tape drive is a Dell Powervault LTO-5-140 (that is really an IBM
Ultrium-HH5) and I'm using Bacula 5.03 compiled on Red Hat 5.6.
The SD config
John,
thanks for your answer.
The only lines I find in dmesg for the tape are:
st: Version 20070203, fixed bufsize 32768, s/g segs 256
st 4:0:0:0: Attached scsi tape st0
st0: try direct i/o: yes (alignment 512 B)
st0: Block limits 1 - 16777215 bytes.
which seem to be the ones that correspond to
Hi guys,
First my apologize for such a newbbie thing. I had my pool configured
for 50GB which was the size bacula used in the tapes.
Thanks Ralf for your appreciation, you where right!! :-).
Thanks to everyone.
Regards,
-- Toda la información contenida en este correo electrónico es
Hi,
I have a pool that had recycle enabled and thus, a tape that had valid backups
was set as recycled and all the jobs in the tape
(and the next 2 that shared a job) were deleted from the database. I need to
know how to restore the jobs back to the database.
Regards,
-- Toda la
Hi,
I'm a newbee to bacula and I had autorecycle=yes on a pool that should
not be recycled. I had a tape recycled and all the jobs purged and I'm
trying to recover the jobs to the database. The thing is that I used
bscan -sSm -V volname DRIVE and it fixes the used space of the tape,
finds the
Hi,
This is the second time I ask (as the first was nobody answered). I
accidentally purged/pruned (by autorecycling the tape) the tape. I'm now trying
to recover it to the database with bscan but
the job appears as finished with errors. I followed the utility
manual instructions but still can't
Hi Konstantin,
First of all, thanks for your reply.
I've read the post you mention and is not related. I'm trying to recover
a job that is in one tape and the problem is that I get the job rescaned
into the database but with errors.
Reading other posts with problems with bscan I've set all
David,
Por lo que veo, tu problema está en un llamado del script que se corre
antes de ejecutarse el backup. No es un problema relacionado con bacula
en si. Fijate en el script /home/.bacula/bacula_cli.py para corregirlo
si es que lo configuraste tu y sino, elimina en el job en el
bacula-dir.conf
Dear Michael,
You're right, after several runs I forgot to place the flag and then
just copied the command and never saw it missing. That's why it's no
longer creating the record, Anyway, the error continues.
The right output is:
bscan -m -s -v -c /etc/bacula/bacula-sd.conf -V Peliculas0001
Hi there,
I'm installing Bacula with a TS3100 tape library from IBM and I'm
managed to get it to load, unload and label the tapes. The problem
is when I try to backup bacula complaints that it has no device in
the SD.
I've followed every guide in the baculas's
that something was backed up but actually, was not.
Can someone confirm this and maybe help me get a work around to this?
Regards,
Juan Pablo Lorier
-- Toda la información contenida en este correo electrónico es confidencial y
para conocimiento exclusivo de su destinatario. Agradeceremos que Ud
Hi Garry,
Thanks for your answer, I'll take a look at that option to see if it
fits my needs.
Regards,
-- Toda la información contenida en este correo electrónico es confidencial y
para conocimiento exclusivo de su destinatario. Agradeceremos que Ud. nos
comunique inmediatamente si ha
Hi John,
I don't think I can use it that way if it interferes with the proper
operation.
Regards,
-- Toda la información contenida en este correo electrónico es confidencial y
para conocimiento exclusivo de su destinatario. Agradeceremos que Ud. nos
comunique inmediatamente si ha
Hi,
I'm using bacula 5.0.3 on Centos 4 and I had to add recently a couple of
new filesets and though I reload the director config they don't get into
the database and thus if I run a job using those filesets, I get an error.
Can anyone give me a help with this?
Regards,
Hi,
Sorry for the delay, but I'm now trying to reproduce the problem and I
get other problems. ASAP I can get back to the original error, I'll let
you know.
Regards,
On 25/09/13 03:21, Radosław Korzeniewski wrote:
Hello,
2013/9/24 Juan Pablo Lorier jplor...@gmail.com:
Hi,
I'm using bacula
Hi,
I've created new filesets to backup new servers but though they are
in the bacula-dir.conf and I've reloaded the config, but the
filesets are not been created in the database and thus, are not
shown in bconsole or bat. Other kind of records like clients,
Hi Kern,
Thank you. I thought that the error with the job was related with the
fileset not been in the database, but then it's the other way arround.
Regards,
--
November Webinars for C, C++, Fortran Developers
Hi,
I've moved the director to a new server and thus changed the client for
the restore jobs. The thing is though I have loaded the changes, and
even choose the client manually for the restore, bacula still delivers
the files to the client declared in the backup job.
If I change the client of the
I have a replication among two datacenters and I use a copy job to copy
all backups from datacenter A to B. The thing is that BW is getting
short and I want to know if is possible to compress the data sent by the
network to the second storage daemon.
Regards
19 matches
Mail list logo
