[beagleboard] Re: Starting .py Files on Boot/Seth

Hello, I found this info: #!/usr/bin/env python [Unit] Description= After=generic-board-startup.service [Service] Type= ExecStart= [Install] WantedBy=multi-user.target ... Is this what you have for starting files on boot? If so, please contact me. Oh and if not, contact me too. Seth

Re: [beagleboard] Not sure where to post PocketBeagle question

On Thu, Sep 28, 2017 at 4:24 PM, wrote: > Arm Cortex M3? Just curious - is this a cut & paste error from somewhere? > From the "Summary of Key Features" on all the PocketBeagle descriptions I > see: >> >> Based on new Octavo Systems OSD3358-SM 21mm x 21mm system-in-package

[beagleboard] Not sure where to post PocketBeagle question

Arm Cortex M3? Just curious - is this a cut & paste error from somewhere? >From the "Summary of Key Features" on all the PocketBeagle descriptions I see: > >- Based on new Octavo Systems OSD3358-SM 21mm x 21mm system-in-package >that includes 512MB DDR3 RAM, 1-GHz ARM Cortex-A8 CPU,

RE: [beagleboard] X15 Boot via USB

Looks OK. As to small, there are smaller. You can take a soldering iron and heat one side and use the solder iron to lift the part up off the board. Takes about 30 seconds if you have done it before. If not, you may want to find someone that has done it before. Gerald From:

Re: [beagleboard] X15 Boot via USB

Hello Gerald, Thank you for the quick reply. Can you review the image attached and confirm this is what I should do? Please refer to highlights in bright

Re: [beagleboard] X15 Boot via USB

Hello Jason, Thanks for the reply. Can you tell me what to put into the /boot/uEnv.txt file to do this? Do I install debian/OS image to the USB hard drive and just link to uEnv.txt to that? I would like to just install another image/OS on the USB drive and have the EMMC boot refer to that?

Re: [beagleboard] X15 Boot via USB

I just run my rootfs off of USB3 myself. You can adjust the /boot/uEnv.txt file on the eMMC to specify a different root. > On Sep 28, 2017, at 11:23 AM, Gerald Coley wrote: > > Check the schematic Page 13. There is a table showing where the jumpers go to > affect the

Re: [beagleboard] Re: Beagle Bone Black stopping at Starting Kernel....

Tried with these too, same kernel panic... On Thursday, September 28, 2017 at 11:33:26 AM UTC+5:30, Madhu K wrote: > > Hi, > > Can you try these addresses. > > uImage :0x8200 > FDT :0x8808 > > On Wed, Sep 27, 2017 at 4:42 PM, Ashish Maurya > wrote: > > I

RE: [beagleboard] X15 Boot via USB

Check the schematic Page 13. There is a table showing where the jumpers go to affect the booting sequence. All you have to do is solder a wire into those holes to change the setting. For SATA you just need to install one wire in J3 position 1-2 and remove R444. The lines in read show the

[beagleboard] Boot from USB external drive or eSATA

Hello, I just purchased an X15 and the EMMC memory is rapidly filling up. I would like to do one of two things... 1. Boot directly from an external hard drive via USB and bypass EMMC 2. Boot from eSATA Questions... 1. Is it possible to boot directly from USB and if so how? 2. Are there more

[beagleboard] Connect in Wifi while in U-Boot

Hello Everyone, Good Day! I'm currently compiling kernel for Beaglebone Black Wireless and I want to test it by loading it into RAM and boot it there through TFTP server. The problem now during U-Boot the device has no connection because it has no ethernet. The only to connect in the network

[beagleboard] X15 Boot via USB

Hello, I just purchased an X15 and the EMMC memory is rapidly filling up. 1. Is there a way to boot from an external USB hard drive? or 2. Can someone provide more detail directions on switching boot sequence to boot directly from eSATA? The reference manual is very vague on this. You need to

Re: [beagleboard] Re: Beagle Bone Black stopping at Starting Kernel....

HI Madhu, Problem got solved with second method, i.e with uEnv.txt file and zImage instead of uImage. But now it is getting panic at rootfs mounting at VFS: [1.906886] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -2 [1.915395] Please append a correct "root="

[beagleboard] Beagleboneblack board is not booting from emmc and SD card.

Hello Experts, So far my BBB board is worked and able to boot from both eMMC and SD card but suddenly, my board is not booting any more, tried with SD boot too (press and hold the S2 button while power ON) and it doesn't help. I am getting nothing on console when I try to boot from eMMC

Re: [beagleboard] Re: Beagle Bone Black stopping at Starting Kernel....

Hi, Can you try these addresses. uImage :0x8200 FDT :0x8808 On Wed, Sep 27, 2017 at 4:42 PM, Ashish Maurya wrote: > I am doing this on u-boot prompt... > U-Boot# fatload mmc 0:1 0x8060 uImage > reading uImage > 4964640 bytes read in 1714 ms (2.8