Hello, I just purchased an X15 and the EMMC memory is rapidly filling up.
1. Is there a way to boot from an external USB hard drive? or 2. Can someone provide more detail directions on switching boot sequence to boot directly from eSATA? The reference manual is very vague on this. You need to unsolder and resolder resistors to act as jumpers? There are perforated holes in the circuit board where the resistors and jumpers are supposed to be. Are the resistors supplied? Are they on the board? If so where are they? What are their values in Ohms? How are the perforations on the board numbered 1-3 from left to right or right to left? This needs to be much more detailed. Why would you design a board that make switching the boot sequence so difficult? How about just putting in some removable jumpers! Any detailed help and direction would be appreciated. Thanks MAB -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/888427c3-b40f-45c3-a38c-ba6e0bc7fbba%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
