Do you have pull-up resistors?
--- Graham
==
On Monday, March 19, 2018 at 8:28:51 AM UTC-5, Paco Velasco wrote:
>
> When I connect the rtc it does not detect the 68 address (I2C Tool).
>
> I have test with 2 RTC diferent,and with the BBB I have no problem.
>
> Anybody knows what could be the pr
Thanks for the reply,
I believe I've already gone into the uEnv.txt and tried to explicitly do
things like disable HDMI and enable the two SPI ports, (if I remember right
I added those to "enable_partno=" or whatever the syntax was).
But when I boot with the cape plugged in it seems to have no
OK, my possible understanding at this point is this:
Cape EEPROM has a name string on it.
BBB looks at that name string first and loads the matching file device tree.
For some reason, no other device tree overlays are loaded. SPI is not a
part of the overlay for this cape (confirmed by looking at
Hi everyone,
My project requires reading an encoder pulse (1,000,000+ counts/sec) and
pulsing a laser (or not) in response to that count. I was wondering if
anyone has a way to read in the encoder counts from the eQEP into the PRU
in a manner that results in little latency. I am leaning towards
Thanks Robert! I would never have guessed that the bootloader in the emmc
would/could interfere with the bootloader on the SD card.
I now have 9.3 running out of the box from the SD card!
Thanks!
Aaron
--
For more options, visit http://beagleboard.org/discuss
---
You received this message b
"this might have broke something" --> do you mean the >>
dtb=am335x-boneblack-overlay.dtb] line?
We have ordered a serial cable, I'll get you the boot output as soon as it
arrives. Thanks so much for your help and insight on this...
On Tuesday, March 20, 2018 at 6:02:57 PM UTC-7, RobertCNe
Hi Robert,
We've copied the 572x EVM, reva3 schematic as closely as possible, but then
added some peripherals.
Our custom board is utilizing 4, Micron, MT41K256 512 MiB DDR3 chips for
DDR3. I believe this is on Gerald's BOM for the BB-X15.
Right now our EEPROM is blank. My strategy, for th
On Wed, Mar 21, 2018 at 12:47 AM, wrote:
> I am having the same issue with my BBB. Modifying the device tree with
> values that should run the I2C clock to 400 kHz does not seem to change the
> speed upon rebooting. I validated that the .dtb was modified by unpacking it
> into a .dts again to che
I am having the same issue with my BBB. Modifying the device tree with
values that should run the I2C clock to 400 kHz does not seem to change the
speed upon rebooting. I validated that the .dtb was modified by unpacking
it into a .dts again to check if the value was 400 kHz.
Is this method of
On 21/03/18 17:19, Kakarla Srinivas wrote:
> Please check the log and provide the solution.
> Temporary failure resolving 'repos.rcn-ee.com'
In other words, your BeagleBone is unable to reach your nameserver, so
doesn't know who on earth 'repos.rcn-ee.com' is. The solution is to
troubleshoot y
Hi ,
I want to install desktop environment on begale bone balck compiled kernel.
I tried the script file provide by you.It is not working here is the error
message.
Please check the log and provide the solution.
[sudo] password for debian:
Err:1 http://repos.rcn-ee.com/debian stretch InReleas
11 matches
Mail list logo