How to proceed from here? LED D5 and D14 are still ON.
Do I just close the PC Console terminal?
[image: halt.PNG]
On Monday, August 5, 2019 at 3:18:02 PM UTC-4, Robert Heller wrote:
>
> At Mon, 5 Aug 2019 23:18:31 +0530 beagl...@googlegroups.com
> wrote:
>
> >
> >
> > Interesting. I
The programming of the MAC address in the EEPROM is not an issue, once you
are set up for it.
There are some other Ethernet connection options that you can turn on/off
at the same time.
But the program remembers what you want, and even auto-increments the MAC
address for you if you are programming
assemble on 2 sides is no issue
populate one side, reflow solder, populate the other side, reflow solder
the surface tension will keep the parts on the other side IF the solder
even melts
On 8/5/2019 5:57 PM, Steven Keller wrote:
Graham,
Thanks so much! That should be enough to get me
Graham,
Thanks so much! That should be enough to get me started. I wanted to
avoid parts on the bottom of the board as it makes assembly more
difficult. Board size isn't too much of a problem. The extra EEPROM
programming step is a bit of pain but not impossible.
Thanks again!
On Monday,
Steven:
The primary reason for parts on both sides of the boards is just space
constraint.
With an extra half square inch of space, everything could be on one side.
I do like to keep the transient suppressor as close to the RJ-45
connector as possible.
You would still need a four layer board to do
Graham,
If you don't mind could you answer a few questions?
You have parts on both sides of the board. Is this primarily because of
the size constraint or to keep traces short as possible?
Is it possible for the driver software to load the MAC address of the
Beagle Bone into the LAN9500A?
At Mon, 5 Aug 2019 23:18:31 +0530 beagleboard@googlegroups.com wrote:
>
>
> Interesting. I thought shutdown command was the way to do it.
/sbin/halt === /sbin/shutdown -h now
/sbin/reboot === /sbin/shutdown -r now
/sbin/halt and /sbin/reboot are "shortcuts" for common shutdown cases.
Feel
Interesting. I thought shutdown command was the way to do it.
On Mon, Aug 5, 2019 at 6:22 PM Robert Heller wrote:
> At Sun, 4 Aug 2019 21:25:19 -0700 (PDT) beagleboard@googlegroups.com
> wrote:
>
> >
> >
> >
> > I have my BeagleBoard-xM connected to Windows 10 Laptop. They are
> >
Sean,
I also tried the TechLab IMG on GamePup and got a login screen on GamePup.
On Monday, August 5, 2019 at 8:59:37 AM UTC-4, Lee T. Davy wrote:
>
> Sean,
> I remember I modified the TechLab IMG (below) for GamePup to make uSD
> image work with display and not sure I had originally tested
Sean,
I remember I modified the TechLab IMG (below) for GamePup to make uSD image
work with display and not sure I had originally tested with IOT.
My original IMG was (like you) from last spring on Pocket Beagle before I
had Game Pup and Tech Lab.
I am as confused as you so I am starting with
At Sun, 4 Aug 2019 21:25:19 -0700 (PDT) beagleboard@googlegroups.com wrote:
>
>
>
> I have my BeagleBoard-xM connected to Windows 10 Laptop. They are
> communicating over serial console.
> I logged out and closed serial console.
>
> How should I correctly power down my board?
*Before* you
11 matches
Mail list logo
