Re: [beagleboard] Is the elinux x15 page up-to-date?

> On Dec 22, 2016, at 3:13 AM, Rick Mann wrote: > > According to the page > (http://elinux.org/Beagleboard:BeagleBoard-X15#BeagleBoard-X15_Distributors), > the x15 has been shipping 250 units per week since the end of September. But > Element 14 shows it as "coming

Re: [beagleboard] Re: Wireless speed issues?

The 24v is isolated from the 5v for the BBB, I've found sometimes my machine is unstable and sometimes it is fine. I did pick up a 24v 6a supply and haven't had an issue since. Also, when I plugin the supply to the wall, it can support powering up the machine as compared to the previous

[beagleboard] P8_9 and P8_10 from the PRU?

Is there an easy way to access to P8_9 and P8_10 from the PRU? I haven't found much code on how one can access the GPIO's, I assume the DTO needs to set the mode to 7 (GPIO[5] and GPIO[4])? Thanks J -- For more options, visit http://beagleboard.org/discuss --- You received this message

Re: [beagleboard] Is the elinux x15 page up-to-date?

On Fri, 12/23/16, Rick Mann wrote: Subject: Re: [beagleboard] Is the elinux x15 page up-to-date? To: beagleboard@googlegroups.com Date: Friday, December 23, 2016, 3:44 AM Thanks much! > On Dec 22, 2016, at 17:43 ,

Re: [beagleboard] Is the elinux x15 page up-to-date?

Thanks much! > On Dec 22, 2016, at 17:43 , Gerald Coley wrote: > > I did earlier today. > > Gerald > > On Thu, Dec 22, 2016 at 7:38 PM, Rick Mann wrote: > Maybe just put that note in place, then. Right now, someone looking at that > page (like

Re: [beagleboard] Is the elinux x15 page up-to-date?

I did earlier today. Gerald On Thu, Dec 22, 2016 at 7:38 PM, Rick Mann wrote: > Maybe just put that note in place, then. Right now, someone looking at > that page (like me) doesn't know what information is trustworthy. Maybe > something like (as of mm/dd/,

Re: [beagleboard] Is the elinux x15 page up-to-date?

Maybe just put that note in place, then. Right now, someone looking at that page (like me) doesn't know what information is trustworthy. Maybe something like (as of mm/dd/, negotiating distribution contracts) or something like that. Thanks! > On Dec 22, 2016, at 05:04 , Gerald Coley

Re: [beagleboard] Re: PRU cycle counter overflow

On 12/22/2016 10:45 AM, Justin Pearson wrote: > I have the same question. > > I'm using the PRU's 200 MHz cycle counter to timestamp sensor measurements. > At > 200 MHz, this 32-bit counter overflows in 20 seconds. I would like to notify > a C > program running on the 1GHz host ARM processor

[beagleboard] Re: PRU cycle counter overflow

I have the same question. I'm using the PRU's 200 MHz cycle counter to timestamp sensor measurements. At 200 MHz, this 32-bit counter overflows in 20 seconds. I would like to notify a C program running on the 1GHz host ARM processor as soon as it overflows. *Is it possible to configure the

Re: [beagleboard] Re: BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device

On Thu, 12/22/16, Jeremy Herbert wrote: Subject: Re: [beagleboard] Re: BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device To: "BeagleBoard" Cc:

Re: [beagleboard] Re: BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device

Hi Robert, Thanks, that makes sense. Will reflash with the iot image. Thanks, Jeremy On Friday, 23 December 2016 01:25:33 UTC+10, RobertCNelson wrote: > > On Thu, Dec 22, 2016 at 7:58 AM, Jeremy Herbert > wrote: > > Just as an update, unloading the g_ether and loading

Re: [beagleboard] Re: BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device

On Thu, Dec 22, 2016 at 7:58 AM, Jeremy Herbert wrote: > Just as an update, unloading the g_ether and loading g_serial results in a > working serial port at /dev/ttyGS0. Of course, the usb ethernet doesn't work > after this, and the modules can't be loaded at the same time.

Re: [beagleboard] Re: Announcement: Debian 8.6 released for all boards

On Thu, Dec 22, 2016 at 2:20 AM, John Dammeyer wrote: > I'm a little bit afraid of updating and have moved backwards. I've had > nothing but troubles with Jesse 8.6. Using a Rev B Beaglebone Black I have > MicroSD cards with 7.8, 8.6 and the original Angstrom in the on

[beagleboard] Re: BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device

Just as an update, unloading the g_ether and loading g_serial results in a working serial port at /dev/ttyGS0. Of course, the usb ethernet doesn't work after this, and the modules can't be loaded at the same time. # modprobe g_serial modprobe: ERROR: could not insert 'g_serial': No such device

[beagleboard] Re: MCSPI TX works fine, but RX all zeros

Many thanks ksuzik, I had the same issue with mcspi0 as master. Setting SCLK to input by default solved it. пятница, 11 марта 2016 г., 6:10:07 UTC+3 пользователь ksuzuk...@gmail.com написал: > > Hi, guy. > > I had had the same problem. > But I solved it. > > The problem was very simple. > We

[beagleboard] BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb image doesn't show up as a serial device

Hi, I've just installed this image ( https://rcn-ee.com/rootfs/bb.org/testing/2016-12-18/console/BBB-blank-debian-8.6-console-armhf-2016-12-18-2gb.img.xz ) on a BBB rev C, and a BBB with the 2GB flash. Both are behaving the same. They show up as an ethernet device, but not as a serial port.

Re: [beagleboard] HID on BBB with 4.9 kernel

On Thu, 12/22/16, William Hermans wrote: Subject: Re: [beagleboard] HID on BBB with 4.9 kernel To: beagleboard@googlegroups.com Date: Thursday, December 22, 2016, 1:13 AM On Wed, Dec 21, 2016 at 1:56 PM, roboknight

Re: [beagleboard] Is the elinux x15 page up-to-date?

As soon as we have a firm date, I will update the page. Any date I put out there would be a wild guess at this point and nothing I have any control over. The CM is working with the distributors to secure the orders. Contracts have to be signed with each distributor which can be a lengthy process

[beagleboard] Is the elinux x15 page up-to-date?

According to the page (http://elinux.org/Beagleboard:BeagleBoard-X15#BeagleBoard-X15_Distributors), the x15 has been shipping 250 units per week since the end of September. But Element 14 shows it as "coming soon," rather than backordered. It occurs to me the x15 might be a good platform for

[beagleboard] Re: Announcement: Debian 8.6 released for all boards

I'm a little bit afraid of updating and have moved backwards. I've had nothing but troubles with Jesse 8.6. Using a Rev B Beaglebone Black I have MicroSD cards with 7.8, 8.6 and the original Angstrom in the on board 2GB. IMHO LXQt sucks. I realize this isn't the correct thread to discuss