[beagleboard] Unused AIN pins in BBB Black

We are using only AIN7 for a voltage divider arrangement. For a better EMI perspective, what should be done with the remaining AIN pins (AIN0-AIN6)? Is grounding with a 10K to GND_ADC a better choice than leaving all pins open? -- For more options, visit http://beagleboard.org/discuss ---

[beagleboard] Super Dumbbutt Move

Hello I started to this procedure to connect my bbb to the internet through my computer. https://www.digikey.com/en/maker/blogs/how-to-connect-a-beaglebone-black-to-the-internet-using-usb#:~:text=You%20now%20need%20to%20share,connection%E2%80%9D%2C%20then%20click%20ok. I ran sudo

[beagleboard] BBB LAN full duplex trouble

We are facing a trouble that BBB cannot connect to our test PC via LAN cable with 100Mbps full duplex mode. Does anyone know the solution or some information about this kind of trouble? [Background] We are evaluating BBB to be used for a network application, which is required to connect LAN

[beagleboard] Fwd: Phase Dock Live on Facebook will feature Beaglebone

FYI... I've been asked to do an interview on Facebook Live with Chris Lehenbauer of Phase Dock. They produce a set of acrylic project boards which allow users to snap components in and out to rearrange the organization of technical projects. The project I'm highlighting is a robot using a

[beagleboard] RS-485 Overlay not working

Hello. I would like configure UART4 as RS-485. But I have a problem with z dts file. *dts file:* https://pastebin.com/raw/paGAsxUg *image*: BeagleBoard.org Debian Image 2020-01-01 *kernel*: 4.14.108-ti-r124 *driver*: 8250 serial driver please help. -- For more options, visit

RE: [beagleboard] StarterWare_BBB_support.tar.gz

You could try this: https://github.com/embest-tech/AM335X_StarterWare_02_00_01_01 Graham From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Abdallah Rashed Sent: Tuesday, February 09, 2021 7:30 AM To: beagleboard@googlegroups.com Subject:

Re: [beagleboard] Boot on power BB-x15

Sweet thank you! It took me an embarrassingly long time to find J5.. I was looking over by J3,4,6, turns out its in the middle between U5, U18. It works well! On Tuesday, February 9, 2021 at 9:18:54 AM UTC-8 RobertCNelson wrote: > On Tue, Feb 9, 2021 at 11:13 AM Joseph Tarnow > wrote: > > >

Re: [beagleboard] Boot on power BB-x15

On Tue, Feb 9, 2021 at 11:13 AM Joseph Tarnow wrote: > > Howdy dudes and dudettes, > > I have a Beagleboard x15, and I am trying to make it boot on power, so if I > lose power the board will start when power resumes. I found this thread, but > couldn't make sense of it. Perhaps my google foo is

[beagleboard] Boot on power BB-x15

Howdy dudes and dudettes, I have a Beagleboard x15, and I am trying to make it boot on power, so if I lose power the board will start when power resumes. I found this thread, but couldn't make sense of it. Perhaps my google foo is

Re: [beagleboard] BBAI Stuck Clock Frequency

Or better question, is there a way to increase the limit so it won't be in that state? On Tuesday, February 9, 2021 at 9:42:32 AM UTC-7 stephen@gmail.com wrote: > Is this a hardware limit? > > On Tuesday, February 9, 2021 at 8:58:30 AM UTC-7 RobertCNelson wrote: > >> On Tue, Feb 9, 2021 at

Re: [beagleboard] BBAI Stuck Clock Frequency

Is this a hardware limit? On Tuesday, February 9, 2021 at 8:58:30 AM UTC-7 RobertCNelson wrote: > On Tue, Feb 9, 2021 at 9:53 AM stephen@gmail.com < > stephen@gmail.com> wrote: > >> [image: BBAIThermals.png] >> It seems normal. > > > the cpu is 58.5C, thus it's in state 3... (3.5 degrees

Re: [beagleboard] BBAI Stuck Clock Frequency

On Tue, Feb 9, 2021 at 9:53 AM stephen@gmail.com < stephen.nguye...@gmail.com> wrote: > [image: BBAIThermals.png] > It seems normal. the cpu is 58.5C, thus it's in state 3... (3.5 degrees C over passive limit)... If you stick a fan on it or blow across it, it'll auto upclock.. Regards,

Re: [beagleboard] BBAI Stuck Clock Frequency

[image: BBAIThermals.png] It seems normal. On Tuesday, February 9, 2021 at 8:31:58 AM UTC-7 RobertCNelson wrote: > On Tue, Feb 9, 2021 at 8:59 AM stephen@gmail.com > wrote: > > > > Why is my device only limited to 400 MHz? > > > > It doesn't change no matter what I do > > Check the temps: >

Re: [beagleboard] BBAI Stuck Clock Frequency

On Tue, Feb 9, 2021 at 8:59 AM stephen@gmail.com wrote: > > Why is my device only limited to 400 MHz? > > It doesn't change no matter what I do Check the temps: /opt/scripts/device/x15/test_thermal.sh Do you have an external fan to blow on it? Regards, -- Robert Nelson

[beagleboard] StarterWare_BBB_support.tar.gz

Hello from where can I get StarterWare_BBB_support.tar.gz patch file to support TI bare metal application to BBB? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from

[beagleboard] BBAI Stuck Clock Frequency

Why is my device only limited to 400 MHz? It doesn't change no matter what I do -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails

[beagleboard] Re: Debug tool for M4 processors in BBAI

I think I have a similar question in that I'm hoping to develop an application (as much of a software defined radio application as I can cram into this platform) which utilizes the C66 DSP's on the BB-X15. I'm trying to converge on a process for developing a TI RTOS application for the C66's