[beagleboard] Re: Beagleboard x15 speed
Yes I thik it gives the baseband data after passing through DAC/ADC . The thing which you are explaining is the processing which we can do locally. But the USRP gives the data after sampling. I do not want to make things complicated. I am pretty confused to buy it or not for this operation. because its 280$ board. I can go with Intel NUC too On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3875f6b4-8f19-4e11-9a34-dfd2467ab27c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
Well, is the usrp able to give you baseband data? I did some very very rough benchmarks for each of the 2 C66DSP's, several months ago showing Each C66DSP: Fs = 100kHz. 60, 152 tap FIR filters Close to 100% utilization for each C66 core. Assuming C66's are clocked at 750 MHz. There's also a benchmark document from TI for the C66 (Think it is one of the technical documents you can view associated with the am5728 processor on TI's sites). That document showed: 256 Point FFT 1782, c66x cycles Execution time = 2.373 uS at 750 MHz clock speed. If you're IQ samples are at Fs = 40 MHz, depending on what you want the C66's to do with them then this MAYBE an issue for the C66 DSP's,... On Wednesday, August 8, 2018 at 8:38:18 AM UTC-5, syed hashir wrote: > > Thing is USRP can transmit data through USB 3.0 at max speed it can. But > Can this board process it ?. It should because it has USB 3.0 port. I am > not sure about the Bus speed of the board and other things > > On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: >> >> Hello all, >> >> I want to use X15 with usrp b210,b205 and 2932. My question is if I >> connect usb series usrp with high speed 3.0 port of X15. then Will it >> support the highest sampling rate on USRP?. What is the maximum I can >> acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and >> sometimes overflows and underruns. >> >> Another question. What is the maximum USB 3.0, Esata, main Data Bus >> (through which ports and emmc is connected) and eMMC read and write speed >> on X15 board?. >> >> I want to use it as a single board computer for my mini usrp b205. I want >> to buy it soon. Need suggestions urgently. Whether to buy this thing for >> USRP or not. >> >> >> >> Thanks, >> >> Hashir >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5517fbbd-c8f5-4c21-9782-d81b29ee8946%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
Thing is USRP can transmit data through USB 3.0 at max speed it can. But Can this board process it ?. It should because it has USB 3.0 port. I am not sure about the Bus speed of the board and other things On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f175f816-8f96-4740-9f0c-957227f4e126%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
I am not sure about dma and buffers. I dont have good knowledge of it. I just want to use normal gnu radio block diagram on X15. Even on my high speed computer (not so much high but good atleast). If I increase the sampling rate more than 40MHz. Gnu radio shows overflow and underrun error. This is because the system can not process it before the reception of new data. You are right that we can use buffers. I have tried it but it was not working on gnu radio. I still got the errors of underrun and overflow. Can this board give me 40MHz sampling rate with usrp ? On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/32e91542-cd5b-4960-ad2d-8a96b8bda838%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
So then data is coming from the IQ demodulator at 40 MHz on the USB 3.0 bus from the b210, and you 'd like to have it fill up a buffer via DMA, and then generate an interrupt for one or both C66 DSP's to demodulate, filter, downsample, filter some more, perform error correction coding, until you end up with a data stream?? On Wednesday, August 8, 2018 at 8:18:27 AM UTC-5, syed hashir wrote: > > I want to use it to capture IQ data. > > On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: >> >> Hello all, >> >> I want to use X15 with usrp b210,b205 and 2932. My question is if I >> connect usb series usrp with high speed 3.0 port of X15. then Will it >> support the highest sampling rate on USRP?. What is the maximum I can >> acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and >> sometimes overflows and underruns. >> >> Another question. What is the maximum USB 3.0, Esata, main Data Bus >> (through which ports and emmc is connected) and eMMC read and write speed >> on X15 board?. >> >> I want to use it as a single board computer for my mini usrp b205. I want >> to buy it soon. Need suggestions urgently. Whether to buy this thing for >> USRP or not. >> >> >> >> Thanks, >> >> Hashir >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e991213f-d22e-4f28-953a-37255849d13d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
I want to use it to capture IQ data. On Tuesday, August 7, 2018 at 7:16:52 PM UTC+3, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8554e739-1658-4b6a-9484-11f3e32d6af2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
Hi. I wish I knew the answers off hand. But am just starting to work through gnuradio, and the https://www.ettus.com/product/category/USRP-Bus-Series LOOKS like it may be a good platform for hobbying around with gnuradio, and base band/bandpass processing blocks! Albeit, it's $$$. Been hoping to work on an SDR project involving the X15, but that hasn't really gotten off the ground yet. But am making progress towards it.. Maybe if you can provide more insight into what the highest sampling rate on the USRP is, what information is being exchanged over USB 3.0, and what you're wanting the X15 to do with the USRP data, specifically, what portion of the application will run on the X15's A15 cores, C66 DSP's, PRU's, MPU's, etc, then that may spawn some thought on this forum. Also, TI E2E2 maybe able to answer some of the questions as the TI 572X EVM is very similar to the BB-X15. On Tuesday, August 7, 2018 at 11:16:52 AM UTC-5, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/430bdb04-7dc4-4d60-a077-8c1ab7006fef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Re: Beagleboard x15 speed
Hi Hashir. I wish I knew the answers off hand. But am just starting to work through gnuradio, and the https://www.ettus.com/product/category/USRP-Bus-Series LOOKS like it may be a good platform for hobbying around with gnuradio, and base band/bandpass processing blocks! Albeit, it's $$$. Been hoping to work on an SDR project involving the X15, but that hasn't really gotten off the ground yet. But am making progress towards it.. Maybe if you can provide more insight into what the highest sampling rate on the USRP is, what information is being exchanged over USB 3.0, and what you're wanting the X15 to do with the USRP data, specifically, what portion of the application will run on the X15's A15 cores, C66 DSP's, PRU's, MPU's, etc, then that may spawn some thought on this forum. Also, TI E2E2 maybe able to answer some of the questions as the TI 572X EVM is very similar to the BB-X15. On Tuesday, August 7, 2018 at 11:16:52 AM UTC-5, syed hashir wrote: > > Hello all, > > I want to use X15 with usrp b210,b205 and 2932. My question is if I > connect usb series usrp with high speed 3.0 port of X15. then Will it > support the highest sampling rate on USRP?. What is the maximum I can > acheive?. Even with core i7 high speed ports it gives 40 MHZ hardly and > sometimes overflows and underruns. > > Another question. What is the maximum USB 3.0, Esata, main Data Bus > (through which ports and emmc is connected) and eMMC read and write speed > on X15 board?. > > I want to use it as a single board computer for my mini usrp b205. I want > to buy it soon. Need suggestions urgently. Whether to buy this thing for > USRP or not. > > > > Thanks, > > Hashir > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/91e01430-4d6f-46bf-8ad3-2c2df358dc88%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
