Hi,
PocketBeagle doesn´t wifi, at least the ones i have.
The usb cable is the way to connect and power the pocketbeagle at the same
time.
If you want to power it from 5V Vin you could use a ftdi cable at the
console uart 0 to login.
Pablo
2018-08-16 14:28 GMT-03:00 :
> Hey all,
>
> Im having an
Hi,
I'm using omap serial driver to do some rs485 writing and reading. The rts
gpio is toggling correctly and the RE pin is grounded, so rx is always
enabled.
Have done test with other rs485 board and it can write and read.
The issue is that the uart is not receiving what it has wrote, so
hanks,
Pablo
El lun., 27 ago. 2018 a las 12:53, Pablo Rodriguez ()
escribió:
>
> Hi,
> I'm using omap serial driver to do some rs485 writing and reading. The rts
> gpio is toggling correctly and the RE pin is grounded, so rx is always
> enabled.
> Have done test with oth
time;
};
};
Thanks
El lunes, 27 de agosto de 2018, 12:53:06 (UTC-3), Pablo Rodriguez escribió:
>
>
> Hi,
> I'm using omap serial driver to do some rs485 writing and reading. The rts
> gpio is toggling correctly and the RE pin is grounded, so rx is always
Hi. The schematic of the USB0 is the same as they pocket?
El sáb., 8 de sep. de 2018 2:15 PM, An Ra escribió:
>
> Hi all,
>
> I have a custom board (based on PocketBeagle design). I was able to flash
> the EEPROM and it boots up normally and I have access to the Linux command
> Line through
Hi.
Is posible to boot from an microsd and modify the uEnv file on the emmc
after mounting it?
Sorry if i misunderstood the problem
Pablo
El mié., 29 de ago. de 2018 5:49 PM, Robert Nelson
escribió:
> On Wed, Aug 29, 2018 at 3:05 PM Thomas
> wrote:
> >
> > Robert,
> > Your help is much
Hi,
**If not, have you found the P1.1<=>P1.7 to be stable?
It has worked for me. No more random reboot after this.
I'm working in a clone board using the same IC as the PB, when they arrive
i will test stability powering from VIN and VUSB.
I have than this test on the BBBW and not detect any
Is anything coming out from the uart console?
El jue., 13 sept. 2018 a las 10:59, witop01 via BeagleBoard (<
beagleboard@googlegroups.com>) escribió:
>
>
> 在 2015年3月6日星期五 UTC+8下午2:41:17,gr...@sensa.io写道:
>>
>> I wired up a circuit with an LED strip, 3 N-channel MOSFETs, and a
>> separate 12V
i had success with a cheap stencil from oshstencil, solder paste and a
reflow oven, but first i tryed without solder paste and screw a pair of IC
El jue., 31 ene. 2019 a las 14:44, evilwulfie ()
escribió:
>
>
Hi,
The past year i have to power 3 pocketbeagle from Vusb because of the
random reset when connecting to Vin. This was the only thing that worked
for me. Did a lot of testing adding capacitance and non work.
El lun., 12 ago. 2019 a las 10:52, Jason Kridner ()
escribió:
> On Sat, Aug 10, 2019
Vin on same pocket Beagle is bugged, havent seen any official statement but
all My pb( like 6) have the same random reset when powered by Vin. Not when
powered from vusb with the same power supply.
Good luck
El mar., 19 de may. de 2020 7:02 PM, Paul Beam
escribió:
> I have been trying to work
11 matches
Mail list logo