I haven’t used CCS for several years as I use Lauterbach for all my linux
kernel/driver debugging. However, I’ll try to remember how to everything you
need. See inline comments:
Regards,
John
> On Aug 5, 2017, at 9:44 AM, clarkbriggs...@gmail.com wrote:
>
> John,
> Thanks. It does sound li
John,
Thanks. It does sound like you know the TI CCS stuff. While the TI market
place exposed several high level products, I can't figure out how to drill
down to the compiler. In particular, I think I installed for the AM33xx BBB
processor when I first put CCS in, but can't find any trace of th
You need arm-linux-gnueabihf-gdb and it needs to be the same as your compiler
version used to build your executable.
Regards,
John
> On Aug 1, 2017, at 1:44 PM, clarkbriggs...@gmail.com wrote:
>
> William etal,
> Pointing to Molloy was a good hint. I watched him do it and around minute 31
William etal,
Pointing to Molloy was a good hint. I watched him do it and around minute
31 he starts into remote debugging. He uses Eclipse and some cross tool
chain, but I didn't watch that. I am using the TI CCS v7.2 on Windows 7x64
which is Eclipse based, but not cross compiling with their in
On Thu, Jul 27, 2017 at 4:13 PM, William Hermans wrote:
> This is probably the best guide you're going to find on the subject.
>
> https://www.youtube.com/watch?v=T9yFyWsyyGk
>
> Never used it myself( I do not cross compile ), but I'm confident DR
> Molly's instructions work.
>
Just in case it's
This is probably the best guide you're going to find on the subject.
https://www.youtube.com/watch?v=T9yFyWsyyGk
Never used it myself( I do not cross compile ), but I'm confident DR
Molly's instructions work.
--
For more options, visit http://beagleboard.org/discuss
---
You received this messa
John,
Thanks a lot.
I am debugging a user space app.
I guess I didn't realize I could use Eclipse on my host and debug on the
target without the binaries on the host. I do have the sources on my host
anyway.
I have never heard of CCSV7 but a quick look at
http://www.ti.com/tool/ccstudio is attra
Are you debugging user space app or kernel code like drivers, kernel modules,
etc?
If you are debugging user space app, you have two solutions:
1) use gdbserver on your BBB and Code Composer Studio (CCSV7) or Eclipse on
your host, which uses gdb for debugging. You will need your BBB source code