Another small typo:-
Note
This package installes...
Richard
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
On Thursday 17 April 2014 17:00:39 Richard Melville wrote:
Another small typo:-
Note
This package installes...
Thanks, fixed in r12973.
Ragnar
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above
Hi
I'm trying to setup Connman on my LFS/BLFS system(7.5). It requires supplicant
to be configured to D-Bus autostart, so ConnMan can
trigger the autostart of wpa_supplicant, i.e. wpa_supplicant -u. Obviously
DBus needs the proper .service and .conf(Connman)for wpa_supplicant.
I have:
On 04/10/2014 05:02 PM, Cliff McDiarmid wrote:
Hi
I'm trying to setup Connman on my LFS/BLFS system(7.5). It requires
supplicant to be configured to D-Bus autostart, so ConnMan can
trigger the autostart of wpa_supplicant, i.e. wpa_supplicant -u. Obviously
DBus needs the proper .service
- Original Message -
From: Armin K.
Sent: 04/10/14 04:20 PM
To: BLFS Support List
Subject: Re: [blfs-support] wpa_supplicant D-Bus autostart problem
On 04/10/2014 05:02 PM, Cliff McDiarmid wrote:
Hi
I'm trying to setup Connman on my LFS/BLFS system(7.5). It requires
On 04/10/2014 05:49 PM, Cliff McDiarmid wrote:
- Original Message -
From: Armin K.
Sent: 04/10/14 04:20 PM
To: BLFS Support List
Subject: Re: [blfs-support] wpa_supplicant D-Bus autostart problem
On 04/10/2014 05:02 PM, Cliff McDiarmid wrote:
Hi
I'm trying to setup Connman on my
- Original Message -
From: Armin K.
Sent: 04/10/14 04:52 PM
To: BLFS Support List
Subject: Re: [blfs-support] wpa_supplicant D-Bus autostart problem
On 04/10/2014 05:49 PM, Cliff McDiarmid wrote:
- Original Message -
From: Armin K.
Sent: 04/10/14 04:20 PM
To: BLFS
On 04/11/2014 12:16 AM, Cliff McDiarmid wrote:
- Original Message -
From: Armin K.
Sent: 04/10/14 04:52 PM
To: BLFS Support List
Subject: Re: [blfs-support] wpa_supplicant D-Bus autostart problem
On 04/10/2014 05:49 PM, Cliff McDiarmid wrote:
- Original Message -
From
Cliff McDiarmid wrote:
Shouldn't 'install -v -m644 systemd/*.service /lib/systemd/system' be
included in BLFS for supplicant if installing under Systemd?
BLFS does not now support systemd. We may in the future, but we are
limited in volunteers to do the needed work.
-- Bruce
--
On 01/22/2014 08:54 AM, Niels Terp wrote:
Do you have wireless_tools-29 installed ? Does the file /proc/net/wireless
exist ?
Pierre
Yes to both.
Niels
If this is true even after you have unplugged your wired connection,
then I'm thinking two things.
First, and my memory is not clear, I
Hi all,
I have build KDE with wpa_supplicant with D-bus support and DHCP-4.2.5-P1. At
boottime both my network adaptors are assigned IPs correctly.
But I cannot access the internet through the wireless network. When I start
wpa_supplicant, I cannot select an adapter or a network (both
Niels Terp wrote:
wlan0: flags=4163UP,BROADCAST,RUNNING,MULTICAST mtu 1500 metric 1
inet 192.168.0.13 netmask 255.255.255.0 broadcast 192.168.0.255
Seeing this, I would conclude that wpa_supplicant and dhclient wlan0
work fine. What is your problem ?
Pierre
--
Niels Terp wrote:
wlan0: flags=4163UP,BROADCAST,RUNNING,MULTICAST mtu 1500 metric 1
inet 192.168.0.13 netmask 255.255.255.0 broadcast
192.168.0.255
Seeing this, I would conclude that wpa_supplicant and dhclient wlan0 work
fine. What is your problem ?
Pierre
The problem is,
Niels Terp wrote:
The problem is, that when I start the wpa_supplicant program (and an icon
was automatically installed in the notification area), the program opens OK,
but only displays Status: Could not get status from wpa_supplicant. Apart
from that, the program seems dead, I cannot select
Niels Terp wrote:
The problem is, that when I start the wpa_supplicant program (and an
icon was automatically installed in the notification area), the
program opens OK, but only displays Status: Could not get status from
wpa_supplicant. Apart from that, the program seems dead, I cannot
Niels Terp wrote:
I thought that was exactly what wpa_supplicant was for ? I
don't want to connect through both interfaces at the same time - it is
absolutely OK for me if I could just connect through the wireless network,
and even not have my eth0 connected.
wpa_supplicant is there to allow
wpa_supplicant is there to allow your wifi interface to associate with a
wifi access point in negociating the required authentification elements,
nothing more.Once the association is successful dhclient asks the access
point to provide an IP adress to the wifi interface.
To test wlan interface,
On 01/22/2014 03:12 PM, Niels Terp wrote:
wpa_supplicant is there to allow your wifi interface to associate with a
wifi access point in negociating the required authentification elements,
nothing more.Once the association is successful dhclient asks the access
point to provide an IP adress
Niels Terp wrote:
BUT what do I do
when I want to connect to another (random) AP ? I cannot scan for it ?
Do you have wireless_tools-29 installed ? Does the file
/proc/net/wireless exist ?
Pierre
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ:
Do you have wireless_tools-29 installed ? Does the file /proc/net/wireless
exist ?
Pierre
Yes to both.
Niels
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Pierre M.R. wrote:
Niels Terp wrote:
The problem is, that when I start the wpa_supplicant program (and an icon
was automatically installed in the notification area), the program opens OK,
but only displays Status: Could not get status from wpa_supplicant. Apart
from that, the program seems
Thomas Trepl wrote:
Am Mittwoch, 6. M?rz 2013, 11:44:27 schrieb Pierre M.R.:
Ethan Oldale wrote:
Hello
I have recently finished installing LFS 7.2, and then onto BLFS 2013-02-23
I went up to chapter 3, and did the acl, attr, ca certs, iptables, and
openssl parts from chapter 4.
Then I went
Hello
I have recently finished installing LFS 7.2, and then onto BLFS 2013-02-23
I went up to chapter 3, and did the acl, attr, ca certs, iptables, and
openssl parts from chapter 4.
Then I went to the networking section and installed ISC DHCP client,
wget, wireless tools, links and all
Ethan Oldale wrote:
Hello
I have recently finished installing LFS 7.2, and then onto BLFS 2013-02-23
I went up to chapter 3, and did the acl, attr, ca certs, iptables, and
openssl parts from chapter 4.
Then I went to the networking section and installed ISC DHCP client,
wget, wireless
Am Mittwoch, 6. März 2013, 11:44:27 schrieb Pierre M.R.:
Ethan Oldale wrote:
Hello
I have recently finished installing LFS 7.2, and then onto BLFS 2013-02-23
I went up to chapter 3, and did the acl, attr, ca certs, iptables, and
openssl parts from chapter 4.
Then I went to the
On Thu, 24 May 2012 15:38:20 +0100
John Burrell john_burr...@hotmail.com wrote:
wpa_supplicant-1.0 fails with:
../src/drivers/driver_nl80211.c:25:31: fatal error: netlink/genl/genl.h: No
such file or directory
compilation terminated.
I had to include the libnl3 headers location:
I apologize for this off-topiquness.
I repeatedly knocked on the FAQ door for the FAQ maintainer
(as per Preamble instructions) but nobody answered.
I had just switched to Gmail (from Verizon Mail) in order to
(among other things) have a better chance to transmit my
technical, text e-mails
Create a new message -- don't reply to an existing thread, even if you
do change the subject (which you didn't).
alex lupu wrote:
I apologize for this off-topiquness.
I repeatedly knocked on the FAQ door for the FAQ maintainer
(as per Preamble instructions) but nobody answered.
I had just
Hello,
I was wondering if after the wpa_supplicant-0.7.3 paragraph,
To use wpa_cli to control the running wpa_supplicant daemon, add a
control interface to /etc/wpa_supplicant.conf. As the root user:
echo ctrl_interface=/run/wpa_supplicant /etc/wpa_supplicant.conf
it would be worth adding
On Mon, 09 Apr 2012 00:30:16 +0100
alex lupu alup...@gmail.com wrote:
Hello,
I was wondering if after the wpa_supplicant-0.7.3 paragraph,
To use wpa_cli to control the running wpa_supplicant daemon, add a
control interface to /etc/wpa_supplicant.conf. As the root user:
echo
30 matches
Mail list logo
