Thanks, I have one in the basement. I think it will hold the small bit. Will
give it a try.
- Original Message -
From: chiliblindman
To: blindhandyman@yahoogroups.com
Sent: Monday, January 07, 2008 8:25 AM
Subject: Re:[BlindHandyMan] drill very small hole
After thinking about this I
ALL RIGHT! Here's your perfect excuse to get yourself a Dremel Tool or
something akin to this handy little dandy!
Bill Gallik
E-Mail: [EMAIL PROTECTED]
- The purpose of life is to fight maturity.
- Dick Werthimer
[Non-text portions of this message have been removed]
, 2008 6:38 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] drill very small hole
I think the tape idea will get you in more trouble than it will be worth.
Very hard to roll tape on without lumps and the will make the bit wobble.
An idea you might try is checking with some
I need to drill a very small hole in part of a Christmas decoration. Karen
had this snowman that I accidentally broke off an arm.
The way that they were attached was with very small eye hooks. I have some
fine wire about the same thickness 22 or 24 gauge.
I figured that I could clamp the broken
the pyramids used duct tape to get the job done.
That and hose clamps.
- Original Message -
From: Lenny McHugh
To: Blind Handyman
Sent: Sunday, January 06, 2008 2:16 PM
Subject: [BlindHandyMan] drill very small hole
I need to drill a very small hole in part of a Christmas
Most stores have a small chuck mounted on a one quarter inch shaft for holding
tiny bits.
...bob
[Non-text portions of this message have been removed]
PROTECTED]
On Behalf Of Lenny McHugh
Sent: Sunday, January 06, 2008 1:17 PM
To: Blind Handyman
Subject: [BlindHandyMan] drill very small hole
I need to drill a very small hole in part of a Christmas decoration. Karen
had this snowman that I accidentally broke off an arm.
The way that they were
