RE: vibration pump/OPV for brewtus III

Thanks, much clearer now. Beeg From: brewtus@googlegroups.com On Behalf Of Herman Dickens Sent: Wednesday, November 27, 2019 11:11 AM To: brewtus@googlegroups.com Subject: Re: vibration pump/OPV for brewtus III 2 entirely different things. You adjust the pressurestat for steam pressure

Re: vibration pump/OPV for brewtus III

se to adjust the pressurestat > rather than the OPV to lower pressure? > > Thanks again > > Beeg > > > > > > *From:* brewtus@googlegroups.com *On Behalf Of > *Herman Dickens > *Sent:* Wednesday, November 27, 2019 10:22 AM > *To:* brewtus@googlegroups.c

Re: vibration pump/OPV for brewtus III

gt; > Thanks > > Beeg > > > > *From:* brewtus@googlegroups.com *On Behalf Of > *jt123 > *Sent:* Wednesday, November 20, 2019 10:47 PM > *To:* Brewtus > *Subject:* Re: vibration pump/OPV for brewtus III > > > > amazing - thanks! just adjusted the OPV to a

Re: vibration pump/OPV for brewtus III

g > > > > *From:* bre...@googlegroups.com > *On Behalf Of *jt123 > *Sent:* Wednesday, November 20, 2019 10:47 PM > *To:* Brewtus > > *Subject:* Re: vibration pump/OPV for brewtus III > > > > amazing - thanks! just adjusted the OPV to about 10 bar when blind,

RE: vibration pump/OPV for brewtus III

To: Brewtus Subject: Re: vibration pump/OPV for brewtus III amazing - thanks! just adjusted the OPV to about 10 bar when blind, and sure enough, the drain back into the tank is now flowing at a much higher rate, pretty close to the recommended amount! was a bit late to pull shots tonight

Re: vibration pump/OPV for brewtus III

in the chassis. > > > > Good luck! > > > > *From:* bre...@googlegroups.com > *On Behalf Of *jt123 > *Sent:* Wednesday, November 20, 2019 7:25 AM > *To:* Brewtus > > *Subject:* Re: vibration pump/OPV for brewtus III > > > > minor update: I just

Re: vibration pump/OPV for brewtus III

minor update: I just did the pump check , and with the blind disc in holding pressure, I'm only getting a very slow drip from the return tube back to the water tank - not the 1 oz-ish in 12 seconds. This most likely suggests the pump is on its way