Re: What are symptoms of the B II pump starting to fail?
> > jt, > I think you had the same symptoms I see, but a different cause. I opened the Brewtus. No visible kinks in tubes coming out of OPV. Just to be sure, I rerouted those tubes so they were clear of wires. My brew pressure with a blank portafilter in is 9.8. I can't adjust it. The screw in the OPV is frozen. I checked all electrical connections. I brewed a shot and the pressure oscillated. I then went and did the flow test in the video you sent. With a blank portafilter, the flow starts and then stops. Just like in video. But, the flow does not start up again. Different than video. I suspect that either the tube is clogged and I can't see it. Or, the pump is starting to fail. I did order a new pump assembly a few days ago on general principals. When I receive it, I will call WLL and check the symptoms with them. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/08b1253a-bd99-4fd1-abd6-cbdcc9e25a54%40googlegroups.com.
Re: BII - replaced PStat - what to replace next?
> > Eric, > Thanks, Where are the overtemp cutoff switches? I should look at them. I had bought a pack of 100 vac relief o-rings from Amazon that are supposed to be good at 400 degrees. I replaced 1. I recently replaced the pressure stat. I had rebuilt my brew head earlier this year with a kit of springs & seals from WLL. Did not solve the reason I did that. Instead I found a loose wire going into the PID that was the problem . I have checked the brew leverl seal. My PID screen is starting to lose segments from first digit. Not a big problem. I ordered a new pump assembly kit a few days ago. Brew pressure during shots is oscillating. Goes up to 9 and then down to 5 and then back to 9. I suspect the pump is starting to fail. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/537775dd-c2f5-45df-a4c0-53b8c661f098%40googlegroups.com.