Hey Tim. Although nothing on here, I hope someone local to you has already
stepped up to the plate for you and has contacted you directly. If not,
maybe this will nudge someone ..Even an OLD, well-used mobile 2M rig and
even a simple antenna will be a dramatic improvement; perhaps someone has
You must be intimate with your radio and its manual. After you read it,
read it again.
I suggest you buy a good programming cable and use Chirp to program your
radio. Once you use it you will see why. youtube has videos if you need
some help with it.
If you use Chirp and it works for you,
go to walter holmes zoom:
always someone in the group to help
https://zoom.us/j/2815436502
room 2815436502
Password 123456
On Wed, Jun 16, 2021 at 9:24 AM Timothy Herrin via BVARC
wrote:
> To all,
> I just got my technician license and have been playing around with my
> simple Baofeng
To all,
I just got my technician license and have been playing around with my
simple Baofeng radio. I set the frequencies, but the difference between my
upper and lower frequencies change after inputing the tone. I'm unable to
hear anything and I'm just trying to figure out if I've set it up wrong
RADIO CLUB' <bvarc@bvarc.org>
Cc: 'Allen Brier N5XZ' <n...@earthlink.net>
Subject: RE: [BVARC] Elmer Needed for Flex 6300 Integration with N1MM+ & CW
Skimmer
Talk to Al, N5XZ. He is on this reflector and also on the 146.940 repeater
during drive time
73,
Ron, K5H
Hello all, as usual I have let my alligator mouth overload my canary a** -
A group from the HQRP group is planning to work the ARRL 160m contest this
weekend & I volunteered my Flex 6300 to the effort.
Problem, I'm not a CW operator nor have I set up CW Skimmer or N1MM+ in the
past. I have
