hi all,
Does anyone had experienced Voice Lab equipment issue/problems in San Jose
testing center?
Could share the experience here ?
I see the old posting saying someone experienced the HW issue during the lab
exam (below)
hi Emanuel,
I agree with you, if the phone like the Cisco 360 testing. It is really hard to
test feature and hard to predict the behaviour,it can suddely disconnect
without any cause.
Tks
erwan
--- On Thu, 10/13/11, Vik Malhi vma...@ipexpert.com wrote:
From: Vik Malhi
hi all,
does call manager 7 have paging feature we can use ? for basic paging
tks___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
tks Ash and all for answer
--- On Mon, 8/29/11, Ashraf Ayyash ash.ayy...@gmail.com wrote:
From: Ashraf Ayyash ash.ayy...@gmail.com
Subject: Re: [OSL | CCIE_Voice] paging with CallManager 7
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Monday, August 29, 2011, 3
: 0x4A3668DC
*Jul 21 10:52:15.755: Could not load IVR script
http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
--- On Thu, 7/21/11, Erwan Erwan e_er...@yahoo.com wrote:
From: Erwan Erwan e_er...@yahoo.com
Subject: MVA load issue in proctor rack
To: vma...@ipexpert.com
Cc: supp
Shaikh adil.sha...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Thursday, July 21, 2011, 3:00 PM
hi Erwan,
is this H323 gateway or MGCP gatway?
if this is H323 gateway you do not need
in proctor rack
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Friday, July 22, 2011, 8:09 AM
hi erwan,
if your router is an H323 and you are getting inbound for Mobile Voice Access,
you need 'service mwa' command on POTS dial-peer which has incoming-called
number 3000
2999
!
UCM serv paramter : 2999, also MVA in UCM 2999
This is H323 MVA.
--- On Fri, 7/22/11, Adil Shaikh adil.sha...@gmail.com wrote:
From: Adil Shaikh adil.sha...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: Erwan Erwan e_er...@yahoo.com
Cc
--- On Thu, 7/21/11, Ashraf Ayyash ash.ayy...@gmail.com wrote:
From: Ashraf Ayyash ash.ayy...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack
To: Adil Shaikh adil.sha...@gmail.com
Cc: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com
Received: Thursday, July 21
ic, however in my case, i do not have UCM
--- On Sat, 6/18/11, Bill Lake whl...@gmail.com wrote:
From: Bill Lake whl...@gmail.com
Subject: Re: [OSL | CCIE_Voice] sip phone register
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Saturday, June 18, 2011, 7:45 PM
hi ,
I have sip phone 7965 register to CME , and i like to change to sccp.
however , I have factory reset, still it pick up the SIP loads (not sure where
it from, I have delete from router config )
anyone know why ? and how to move to SCCP easily in this case?
hi there,
I use transfer full consult in CME.
When call from Phone A 3001 hit 4000(repcetion) , and reception transfer to
5000, it can't speak to 5000 before tranfer. Soon when 5000 pick up from 4000,
it always hear MOH.
4000 should be able to announce the 5000 on who is calling before
does anyone exp proctorlab , very slow now? can't do lab properly
--- On Thu, 4/28/11, Naoufal Kerboute naou...@mhdinfotech.com wrote:
From: Naoufal Kerboute naou...@mhdinfotech.com
Subject: [OSL | CCIE_Voice] Proctor is DOWN
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
hi exp,
I used fxview from prctorlab to control CME phone, and follow the guide.
however gave me this error
Problem coomnicate with server, pls verify parameter and try again
Erro hexadecimal value 0x00, invalid character line 30 ,postion 1
tks
any idea ?
hi all,
does anyone know what is the sh run ' command to see any hidden config that
not show up in usual sh run , like : sh run all or whatever /
tks
___
For more information regarding industry leading CCIE Lab training, please visit
hi all,
can someone advice, what i miss in CUPS voicemail.
I kept geeting this error from Show Server Health in CUPC client
Failed to Connect - Invalid Credentials or Account Locked
I verified user name and password for voicemail is working in Phone itself
hi all,
Just wondering if AAR can be applied to call from UCM to CME (thru
Gatekeeper)
HQ Phone (UCM) WAN (Gatekeeper)--CUCME (BR2 phone)
if yes, how to achieve that ?
I only know AAR can be applied to UCM to UCM ( HQ phone in UCM call to
BR2 phone
hmm yes i tried this too: br1ph1 , password :cisco , from UCM End User
--- On Sun, 4/17/11, Vik Malhi vma...@ipexpert.com wrote:
From: Vik Malhi vma...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] Voice mail in CUPS
To: Roger Carpio roger.car...@gmail.com
Cc: Erwan Erwan e_er...@yahoo.com
hi all,
why i can not register my IOS conf with call-manager-fallback ?
it show TCP_CONN_ERROR
here is config
---
sccp local Vlan240
sccp ccm 10.10.201.1 identifier 2
sccp ccm 10.10.210.10 identifier 1
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2
hi all,
When should we use NBAR or DSCP for class-map ?
Like : class-map match-all RTP
match dscp ef
Other : class-map match-any RTP
match protocol rtp audia
match protocol rtcp
tks
hi all,
could someone advice, what is the fastest way to locate QoS example in lab
exam, for LAN and WAN ?
tks in adv___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
If I do not use auto qos on wan , can I find in SRND for manual config ?
--- On Thu, 4/7/11, Ccie Voice v.c...@yahoo.com wrote:
From: Ccie Voice v.c...@yahoo.com
Subject: Re: [OSL | CCIE_Voice] QoS example --quick reference
To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com
hi all,
i tried to register phone 7965 to CME, how ever gave me error : Registration
Rejected
and when I press status ,saying : No DNS available
Advice please!
here is my config:
---
voice service voip
allow-connections h323 to h323
hi all,
does anybody know if IP Expert has remote mock lab with grading, so we know our
mistake ?
If not, mind have a suggestion, which company or web should I check ?
Thanks
erwan___
For more information regarding industry leading CCIE Lab
hi all,
I tried to config MVA in HQ site,
Scenario
-
I dial in from PSTN to 5999 (MVA #)
it gave me prompt for pin and press 1 to dial any outside number (911)
1. If I use SIP trunk It will gave me error saying (below is the complete
debug ccsip message
Sent:
SIP/2.0
hmm i use, proctor lab . not sure what ver ? 7.0 maybe
--- On Sun, 3/27/11, George Goglidze gogli...@gmail.com wrote:
From: George Goglidze gogli...@gmail.com
Subject: Re: [OSL | CCIE_Voice] MVA using sip trunk
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received
no just play around w sip trunk
--- On Sun, 3/27/11, mihal caro mihalc...@gmail.com wrote:
From: mihal caro mihalc...@gmail.com
Subject: Re: [OSL | CCIE_Voice] MVA using sip trunk
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Sunday, March 27, 2011, 6:14 PM
hi
hi all,
can someone explain bit on MVA logic or flow ?
I config MVA Complete match service parameter in UCM , but still I called
from any number , it prompt for pin (as if it match)
Thanks in adv
___
For more information regarding industry
hi all,
When I press the Voiceview Listen , it said :Unknown Error ,report to
System Administrator
all other Voiceview work fine, wondering what i miss here?
tks
___
For more information regarding industry leading CCIE Lab training, please
I refer to the Guide, it is CUE and dialpeer point to CUE 3600
--- On Wed, 3/16/11, ShinGei Yong shingei.y...@gmail.com wrote:
From: ShinGei Yong shingei.y...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Vol 2 Wb lab 6 HQ call BR-2 CUE failed
To: Erwan Erwan e_er...@yahoo.com, ccie_voice
hi all,
I am practicing WB lab 6 , that use Gatekeeper for call from HQ (UCM) to BR-2
(CME)
- call from HQ-- 5001 to 3001 -- Br-2 and vice versa (thru Gatekeeper) , 4
digit ext works fine
- call from HQ to CUE pilot point (3600) (thru Gatekeeper) in Br-2 also
work fine
- call to
hi all,
anyone knows what is the Security Password (IPSec) in CUCM Publisher
configuration ?
I mean do we need to define anywhere in UCM ?
under System -- CUCM Publisher
Thanks in adv
___
For more information regarding industry leading
I got same issue lost 2h now, and they said their web has issue
And suggest me MENU web is complimentary , I should use telnet with empty
config, whch is kind of waste time and hard since I can not load config for
Server and routers.
What u think ?
--- On Sun, 3/13/11, Kalyan iyer
...@ipexpert.com
Subject: RE: Proctor support - voice sesssion
To: 'Erwan Erwan' e_er...@yahoo.com
Cc: 'IPexpert Tech Support Team' supp...@ipexpert.com
Received: Sunday, March 13, 2011, 9:54 PM
Hello Erwan,
Thank you for contacting the IPexpert Technical Support Team. We
they suggest to use telnet and do config from scratch,however the telnet also
not work for some device after cleared
--- On Sun, 3/13/11, Kalyan iyer kparam2...@gmail.com wrote:
From: Kalyan iyer kparam2...@gmail.com
Subject: [OSL | CCIE_Voice] Proctorlabs rack rental
To:
hi,
Does anyone know how to control phone using Unified FX so it can place call,
conference ,etc?
(not thru Line select)
I thought Unified FX would be like Berbee Phone control ???
Thanks,
erwan
___
For more information regarding
hi,
anyone know which WB LAB load should I use to practice Presence Integration
from scratch ?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
hi guys,
What is the quickest way to test SRST in proctorlab ?
1. I felt that using the button menu SRST take some time before go to SRST
and back to normal mode
2. if I use CCM Group that just contain PUB or SUB, it also take
sometime (at least 3 minute). And most of time , I have
hmmm, i did not , i not used pull UCM config, what trace ?
as it always work ,so i did not pull trace
--- On Sun, 11/21/10, Cristobal Priego cristobalpri...@gmail.com wrote:
From: Cristobal Priego cristobalpri...@gmail.com
Subject: Re: [OSL | CCIE_Voice] MGCP issue on BR-1 Router
To: Erwan
hmm, yes i will tmr
btu 911 , is 911 yo send ,right ?
tks
--- On Sun, 11/21/10, Cristobal Priego cristobalpri...@gmail.com wrote:
From: Cristobal Priego cristobalpri...@gmail.com
Subject: Re: [OSL | CCIE_Voice] MGCP issue on BR-1 Router
To: Erwan Erwan e_er...@yahoo.com
Cc: ccieid1ot ccieid
hi expert,
anyone succedd on config CUPC softphone mode in proctor lab?
I have spend many session and can not get softphone mode active (However
Desktop mode is always work). And for softphone mode , i tried in friend rack
, is working fine.
When I click show system health in CUPC ,it
hi,
Anyone experience this before w/ procto lab, BR-1 Router ?
It works fine when i config H323 GW on BR-1, however did not work in MGCP.
When I place call thru MGCP GW, just busy tone. and digit not send to MGCP GW
at all
However when i convert to H323, it work fine (only happen to BR-1
issue on BR-1 Router
To: cciefo...@hotmail.com, 'ccieid1ot' ccieid...@gmail.com,
ccie_voice-boun...@onlinestudylist.com, 'Erwan Erwan' e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Received: Saturday, November 20, 2010, 4:52 AM
All you would need to do is re-enter the bind statements
not drop anything in 911 , I also test local call 9.[2-9]xxx , drop 9 here
--- On Sat, 11/20/10, ccieid1ot ccieid...@gmail.com wrote:
From: ccieid1ot ccieid...@gmail.com
Subject: Re: [OSL | CCIE_Voice] MGCP issue on BR-1 Router
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice
hi all,
anybody can share lab experience in Hongkong ? I heard is very slow. Is that
true ?
And is the slowness really bothering candidate or still acceptable ?
thks
___
For more information regarding industry leading CCIE Lab training, please
hi all,
wondering any other feature for recording in Cisco Unity other than Live
Record ?
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
tks Iwan, I just do not hv Cisco account for download
--- On Sun, 10/3/10, Iwan Hoogendoorn i...@i-1.nl wrote:
From: Iwan Hoogendoorn i...@i-1.nl
Subject: RE: [OSL | CCIE_Voice] CUPC client
To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
Date
hi all,
is anyone know proctor rack has CUPC client installed in the PC ?
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
What sometimes happen to me is Menu show server is up ,but not reacble and
actually is not up. And support will turn on
--- On Sat, 9/18/10, Jon1992 jon1...@hotmail.com wrote:
From: Jon1992 jon1...@hotmail.com
Subject: Re: [OSL | CCIE_Voice] sub is down in pod 20 current-session
To: amr thabt
hi,
anybody experince difficulty when load config thru Menu in proctor lab IPX ?
Wondering any right procedure ? as I always waste around 1 hour to load.
Is it Revert Start and Load ?
Thks for help
___
For more information
|
Completed
PSTN Menu
|
--- On Sun, 9/5/10, rearviewmirror rearviewmir...@gmail.com wrote:
From: rearviewmirror rearviewmir...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Load config in Proctor lab
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Sunday, September
hi,
anybody experience this ?
I have create users in UCM and associate to phones and DN.
And also when I sync in Unity, It see the users. However when I imported , it
is not showing.
Tks,
erwan
___
For more information regarding
yes, my mistake
First it failed and i sync thru Unity -- I did not show in progres.(but
imported by Sync)
tks Amy
--- On Wed, 9/1/10, Amy Ryan ar...@ipexpert.com wrote:
From: Amy Ryan ar...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] import user to Unity ?
To: Erwan Erwan e_er
hi ,
i am trying to use loopback for service engine 0/0 CUE in Proctor lab rack.
I have reset the module ser ser 0/0 reset and reload
and it said
--
Waiting for IOS to register IP address.
- waited 1070 seconds...
WARNING:: IOS communication appears delayed!
WARNING::
anyone exp down again ?
wondering what happening, almost most weekend
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
anybody experience, is proctor lab down??
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
network-clock-select 1 E1 0/0/0 ß—Sets port 0/0/0 as the external master clock
source
The router synchronizes all ports in the clocking domain to the external clock
source that comes in from the PRI port, controller E1 0/0/0. This
synchronization ensures that all devices reference a common
how do you know wolf anf ghulam ?
tks
--- On Tue, 8/10/10, wolfsrudel wolfsru...@gmail.com wrote:
From: wolfsrudel wolfsru...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Invitation to connect on LinkedIn
To: ghulam syed jilani.ghu...@gmail.com, ccie_voice@onlinestudylist.com
Date: Tuesday,
yes, i use prcotor lab
mx record is on DNS
--- On Sat, 8/7/10, Miron Kobelski findko...@gmail.com wrote:
From: Miron Kobelski findko...@gmail.com
Subject: Re: [OSL | CCIE_Voice] VPIM issue CUE to Unity
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Saturday
what quota setting, u mean related to mask setting?
--- On Sat, 8/7/10, Miron Kobelski findko...@gmail.com wrote:
From: Miron Kobelski findko...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Unity message issue
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date
to trobleshoot ? I faced this when use
image for Bootcamp 1 and 2.
thks,
--- On Sun, 8/8/10, Miron Kobelski findko...@gmail.com wrote:
From: Miron Kobelski findko...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Unity message issue
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice
hi,
I try to config VPIM by these steps :
CUE
---
Location ID : 34
Location Name : br2
Domain Name : cue.com
Location ID : 212
Location Name : uc
Domain Name : proctorlabs.com
UC
--
Networking , COnnection Location
Display Name : cuc7-pub
Host
Berlinski dberlin...@gmail.com wrote:
From: Daniel Berlinski dberlin...@gmail.com
Subject: Re: [OSL | CCIE_Voice] SRST dial-peer behaviour
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Friday, July 30, 2010, 6:10 AM
I hate to post things without having access to equipment
Berlinski dberlin...@gmail.com
Subject: Re: [OSL | CCIE_Voice] SRST dial-peer behaviour
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Thursday, July 29, 2010, 3:02 PM
Why aren't you sending all digits to the IOS gateway and doing your
manipulations there? It seems
no man, i have remove it as well.
--- On Thu, 7/29/10, Trying 2nd CCIE dukelon...@gmail.com wrote:
From: Trying 2nd CCIE dukelon...@gmail.com
Subject: Re: [OSL | CCIE_Voice] SRST dial-peer behaviour
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Thursday, July 29
Tried it, still not work
tks anyway Ash
--- On Fri, 7/30/10, Ashar Siddiqui siddas...@gmail.com wrote:
From: Ashar Siddiqui siddas...@gmail.com
Subject: Re: [OSL | CCIE_Voice] SRST dial-peer behaviour
To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com
ccie_voice
Hi Experts,
I am trying to configure so that calling phone will show 7 digit To 8884343
in SRST and Normal mode.
I use dial-peer 7 pots in normal mode (send 8884343 from Route Pattern to BR-1
GW)
RP Local : 9.[2-9]xx , predot , send to BR-1 (H323) , hit dial-peer 7
pots
hi all,
Is anybody experience CUE issue in rack 15 ?
Has been 2 days stuck in 27% boot and no ipaddress in Service Engine 0/0
I tried to reboot many times, here is my config, pls help
interface Service-Engine0/0
ip unnumbered Vlan400
service-module ip address
] proctor rack 15, CUE issue
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Date: Friday, July 16, 2010, 8:05 AM
Do a ser ser 0/0 shut follow by a ser ser 0/0 reset once this has completed. If
that fails let me know.
--
Vik Malhi – CCIE #13890
Subject: Re: [OSL | CCIE_Voice] proctor rack 15, CUE issue
To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com, Ryan
Barnum r...@ipexpert.com
Date: Friday, July 16, 2010, 8:07 AM
I had to bootload it during my session today. It was stuck in and endless
reboot loop. Thought about
hi Tom and Joe,
with JF config like this : mls qos queue-set output 2 threshold 2 50 50 100 100
How can this be correct ? maybe I am wrong, pls suggest (they use threshold 3 ,
but above use threshold 2)
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output
:)
tks again
--- On Fri, 7/2/10, Ashar Siddiqui siddas...@gmail.com wrote:
From: Ashar Siddiqui siddas...@gmail.com
Subject: RE: [OSL | CCIE_Voice] Translation pattern H.323
To: 'Erwan Erwan' e_er...@yahoo.com, ccie_voice@onlinestudylist.com
Date: Friday, July 2, 2010, 3:35 PM
hi all,
Can we specify the TP like this in exam ? For incoming call to our H.323
gateway,so we do not need to worry what it send from PSTN, as long as it is for
3xxx
voice translation-rule 1
rule 1 /.*\(3...\)$/ /\1/
or have to be specific ,like this :
voice translation-rule 1
tks Mouh and others.
I read those, still not understand this, if you can help me.
When I run auto qos cisco-phone it generate (those threshold 3)
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 4 6 7
mls qos srr-queue output
hi all,
I am reading the 3750 QoS , and confuse with the threshold in output queue.
When I run
int f0/4
auto-Qos cisco-phone
!
it generete following :
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7
mls qos
--- On Wed, 6/30/10, Pavan pav.c...@gmail.com wrote:
From: Pavan pav.c...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Qos 3750 --- output queue
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Date: Wednesday, June 30, 2010, 10:01 AM
You
specific
than Re: Contents of CCIE_Voice digest...
Today's Topics:
1. High Traffic ? (Erwan Erwan)
2. Re: High Traffic ? (Pavan)
3. Trust COS or DSCP on uplink to router ? (Mike Brooks)
4. Re: High Traffic ? (Erwan Erwan)
5. Re: High Traffic ? (Pavan)
6. Re: Trust COS or DSCP
Ic, how to check the loop ? what to verify ?
I am using proctor lab, and call to VM 5600, showing this
but other call is fine
--- On Mon, 5/31/10, Pavan pav.c...@gmail.com wrote:
From: Pavan pav.c...@gmail.com
Subject: Re: [OSL | CCIE_Voice] High Traffic ?
To: Erwan Erwan e_er
hi,
any body know what command to see if QOS configure in 3750 is actually working,
when we place call.
ie: we cofigure auto qos voip trust in switch port
As I did not see in sh mls qos interface . Maybe there is other command or
tool ?
tks
are the IP Blue work in Windows 7 ?
tks
--- On Sat, 5/22/10, Wael Agina waelag...@gmail.com wrote:
From: Wael Agina waelag...@gmail.com
Subject: Re: [OSL | CCIE_Voice] IP Blue
To: KatGuru gkr2...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Date: Saturday, May 22, 2010, 1:05 PM
Hi Kat,
tks i saw the traffic
--- On Tue, 5/25/10, Tapan Gautam (tgautam) tgau...@cisco.com wrote:
From: Tapan Gautam (tgautam) tgau...@cisco.com
Subject: RE: [OSL | CCIE_Voice] verify QoS on 3750
To: Erwan Erwan e_er...@yahoo.com, ccie_voice@onlinestudylist.com
Date: Tuesday, May 25, 2010, 3:02 AM
hi,
Is anybody know how to activate DHCP in proctolab CCM for our home IP phones ?
What need to condig in VPN router and Switches ?
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
hi folks,
I use 2611XM to connect to ipexpert remote lab.
Is the D-Link Switch will work fine?
Cable modem --- Linksys wireless router 2611XM Fa0/0 (VPN outside)
2611XM Fa 0/1 (VPN inside) D-Link switch Configuration
laptop/desktop
D-Link switch --- 7961G (power cube)
Hi Tyson,
Will the 806 or 815 work fine for these ? (I am planning to connect 3 7961
phone without switch)
Can you suggest me, what is minimum Router and IOS for EZVPN to your rack?
tks
--- On Wed, 2/10/10, Tyson Scott tsc...@ipexpert.com wrote:
From: Tyson Scott tsc...@ipexpert.com
hi all,
Does anyone know if we have to sit for first lab within 18 months exactly ? or
can be bit flexible , mean 1 or 2 weeks more than 18 months
As I tried to schedule for lab , and the system take it , even after 18 months
period
Thks for answer..
Rgs
hi all,
i plan to attend on 25 Jan , San Jose.
if anyone attend same schedule and want to share hotel, pls ping me
tks
--- On Thu, 1/7/10, Roger Källberg roger.kallb...@cygate.se wrote:
From: Roger Källberg roger.kallb...@cygate.se
Subject: Re: [OSL | CCIE_Voice] Boot Camp March 15 - 26
To:
Congrats Mike ,
Agree, very good point , by helping others we also learn.
Looking at how detailed you explained for most issue we hv in this milis, you
really deserve for the number :)
Erwan
--- On Thu, 11/5/09, Michael Ciarfello mciarfe...@iplogic.com wrote:
From: Michael Ciarfello
hi all,
I am trying to back up CCM 7 config , so that I can reload in my next session.
From Disaster Recovery Backup was very slow, cause they back up lots stuff.
Does anybody know how to backup config in CCM only ?
thks
___
For
hi Peter,
wondering if there is a way to just enable several things to back up by CLI ?
what is the title in the archive ?
tks
--- On Sun, 10/18/09, Peter Slow peter.s...@gmail.com wrote:
From: Peter Slow peter.s...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Backup config CCM 7
To: Erwan
hello,
is it to use CIPPM , we hv to use 7962 ? as I config phone template with
- Speed dia BLF
- Autpork BLF,
and when i config , it did not take it and not the icon not showing like Lab
13 Book 1
tks
___
For more
Nara,
I got same thing like u following the PG steps.
erwan
--- On Sat, 10/10/09, Nara Shikamaru shikam...@kagadis.com wrote:
From: Nara Shikamaru shikam...@kagadis.com
Subject: [OSL | CCIE_Voice] Volume 2 Lab 4 Question 1.2 - CUPS integration
To: OSL Group ccie_voice@onlinestudylist.com
. show version
3. show controllers
4. show isdn status
5. debug isdn q921
Regards,
Andrew
anil batra wrote:
Can you let us know your outputs for ..
1. debug isdn q921
2. sh isdn status
--- On *Sun, 10/4/09, Erwan Erwan /e_er...@yahoo.com/* wrote:
From: Erwan Erwan e_er
hi,
in the CCM Gateway configuration page, under Call Routing Information-Outbound
Calls
Use Device Pool Calling Party Transformation CSS
Is that mean Calling Party Ext Mask from Phone ? or really from DP ?
cause in DP , there is only Calling Party Transformation CSS but for DEvice
lythgo...@gmail.com wrote:
From: Andrew Lythgoe lythgo...@gmail.com
Subject: Re: [OSL | CCIE_Voice] BR-2 E1 as MGCP gateway
To: anil batra anil...@yahoo.com
Cc: ccie_voice@onlinestudylist.com, Erwan Erwan e_er...@yahoo.com
Date: Sunday, October 4, 2009, 3:13 PM
Hi Erwan,
In your config for BR2 I
hi,
I tried to run BR-2 E1 as MGCP gateway, but can't bring the isdn up , any
advice appreciated. tks
Here is config
-
BR-2
controller E1 1/0/0
pri-group timeslots 1-3,16 service mgcp
!
interface Serial1/0/0:15
no ip address
encapsulation hdlc
isdn switch-type
hi,
call from PSTN to Br1 success, and it supposed to trigger the Translation
Rule in Br1, however can't see it.
BR1 config
voice translation-rule 60
rule 1 /^312301\(1...\)/ /\1/
!
!
voice translation-profile In-DNIS
translate called 60
!
voice-port 0/0/0:23
hi,
I make call from PSTN to BR-1 , call go thru fine.
But i am just wondering, why I can not see the debug voice translation and
debug voice dialpeer
when I activate those debug , see nothing. I can only see the debug isdn q931
=
here is my config
--
voice
hi,
I try to test SRST , by disable CCM service , when i rerun CCM service. Voice
mail port is rejected.
Have tried to restart all Unity service , reset port from CCM and Unity , still
not help
Any suggestion, what is wrong ?
tks
___
when I want to subscriber Phone to IPMA service, I only find Intercom Call
in drop down
I have restart all service in CCM also IPMA. also Tomcat , also enable the
service
is this related to SQL service in CCM 7 or do i miss something ?
tks
hi,
when I run the wizard, after done, it said VM Port Wizard operation was out
of synch, please start over
I start still same thing
any suggestion, what wrong and should i do ?
tks
___
For more information regarding industry
1 - 100 of 157 matches
Mail list logo