FYI
There are a BUNCH of open lab dates in RTP and SJC. No idea why but, there are
open labs all of Oct through February.
:)
On Fri, Sep 27, 2013 at 11:45 AM, Martin Sloan martinsloa...@gmail.com
wrote:
Hey Alex,
I hear ya. I went through all locations and checked availability and
hello Guys,
How do I preserve the original calling number for a call made to
a user on unity connection. The idea is to give callers the option
to press 9 and ring his cell phone number at 9515 ( on the pstn) when the
call gets forwarded
to voicemail
I have made the on hook transfer on the
I can't remember the name but if you go to ccm service parameters and search
for 'unity' you'll hit the parameter to preserve the calling number.
On Oct 2, 2013, at 9:02 AM, ramesh rameshdol...@rediffmail.com wrote:
hello Guys,
How do I preserve the original calling number for a call
hi Martin,
I have done that ( preserve original calling number ) in unitynbsp;nbsp;
however it does not preserve the correct calling number for pstn callers
.nbsp; Also the type and plan of the called and calling numbers are messed up.
Any other steps we can take?
From: Martin Sloan
Hi Ramesh,
Just to make sure we're on the same page, are you setting the CUCM service
parameter:
Display Original Calling Number on Transfer from Cisco Unity = True
If you are setting this, can you explain in a little more detail the call
flow and outcome?
Thanks,
Marty
On Wed, Oct 2, 2013
What do you see on the voice gateway for ANI/DNIS of the two separate calls
- inbound (PSTN to Phone (which is then CFNA to CUC)) and outbound (CUC to
PSTN alt dest 9515)?
Take a look your gateways settings for Redirecting Number IE Delivery
(RDNIS) for both inbound/outbound. These
The RDNIS shouldn't be a factor here. I just labbed this up and there is
no Redirecting Number IE in the ISDN messages for this scenario. It's more
of a straight dial from Unity.
I think the places to be checked are:
CUCM service parameter
Call Routing Path
Whatever Route Pattern - Route List
I wasn't sure RDNIS would matter here but figured I would throw it out
there anyway (as it applies when redirecting TO CUC). It seems the unity
service parameter mentioned earlier obviates the need to use RDNIS.
With the option you proposed on creating a new RP/RL just for this
requirement I
Yeah, I wasn't sure on that one either and had to test it out. I can't
recall what the exact requirement, if any, for calling party TON was on the
'practice test' that I had with a similar task but I'm thinking the only
way to properly set the calling TON would be with Xforms on the port level
I have a huge delay in my presence updates on my system. Im assuming that's
from CUPS being installed in my lab vmware environment though. Try to go
off hook or call a pstn number and let it sit for 1-2 minutes. If anyone
knows how to fix the lag, please let me know. Im assuming its related to
Hi Josh,
I do not believe it is related to vmware environment. I am assuming your
CUPS is integrated with CUCM using SIP trunk.
Can you enable SIP debug level to detail and run collect SIP debug logs (
on primary call processing engine i.e. Sub) and check SIP logs why there
is delay in status.?
Hi Marty,
In order to preserve Original calling party TON you have to consider
existing route pattern should not override so two possible ways to achieve
this you can try to use a translation patter which evaluation prior to
route pattern. Let us assume you prefix some additional character and
Thanks for the reply, Ramcharan.
I just blasted my lab to start lab 3 of the OWLE, so I'll need the rest of
this week to get it back to where I can test Presence status again. I'll
let you know what I find out.
Thanks again.
Josh
On Wed, Oct 2, 2013 at 8:59 PM, Ramcharan Arya
13 matches
Mail list logo
