Hi all I'm tying to configure LLQ that will mark packets when it exceeds the
configured bandwidth.
Example:
MPLS network has 384K Gold queue for all packets marked EF/Prec 5 and drops
all packets once its exceeds 384. I'm trying to configure a policy map that
will mark all EF/Prec 5 that
portfast
monitor session 1 source interface Fa0/3 tx
monitor session 1 destination interface Fa0/6
Wireshark reports DSCP field 0x00.
Any ideas?
I tried mls qos trust cos and same thing.
The phone plugged into the switchport is a 7941
Thanks,
Mike
Priego [mailto:cristobalpri...@gmail.com]
Sent: Monday, June 27, 2011 5:37 PM
To: Mike
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MLS QoS issue
the output doesn't show anything like that
you only only posted mls qos map cos-dscp 0 8 16 24 32 46 48 56
which means
CS 0
I monitored transmit and receive and the phone doesn’t seem to be tagging
frames or packets unless the switch is zero’ing them out.
From: Peterson, Ryan [mailto:ryan.peter...@pcmall.com]
Sent: Tuesday, June 28, 2011 9:44 AM
To: Mike
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL
I’ve tried everything:
mls qos trust device cisco-phone
mls qos trust dscp
even full AutoQos and its not tagging packets.
From: Peterson, Ryan [mailto:ryan.peter...@pcmall.com]
Sent: Tuesday, June 28, 2011 9:58 AM
To: Mike
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL
-Original Message-
From: Jason Langenfeld [mailto:jlangenf...@prosysis.com]
Sent: Tuesday, June 28, 2011 11:38 AM
To: Mike
Subject: RE: [OSL | CCIE_Voice] MLS QoS issue
Try changing the mode to trunking. 802.1p priority bits are carried via the
dot1q trunk header. If you do not have a trunk
This is a 3560 running the newest code and its odd that it's not creating a
trunk. I'll try a 3750 see if it's different.
-Original Message-
From: Bill Lake [mailto:whl...@gmail.com]
Sent: Tuesday, June 28, 2011 9:08 PM
To: Mike
Cc: Jason Langenfeld; ccie_voice@onlinestudylist.com
You want it to say You are caller 1 in the queue ?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Hannes
Dippenaar
Sent: Thursday, September 08, 2011 5:49 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] IPCCX Script
files, but are the
CM configs tar files? Bulk imports? How do I can the base configs into CM,
Unity Cx , Presence and UCCX?
Thanks,
Mike
CCIE #17982m (RS)
___
For more information regarding industry leading CCIE Lab training, please visit
I'm in the process of collecting 7961's and I'm a bit confused on how many
phones are in the lab. Is it 2 phones per location plus a PSTN? I figured 6
7961's plus a 7960 for PSTN.
Also does BR2 have a HWIC-ESW or 3750?
Thanks,
Mike
___
For more
He can ask any voice related question he wants...Let us know when you get
your number since you seem to know it all.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amit Singh
Sent: Sunday, November 27, 2011
while the 7941's are still going for 50.00.
Thanks,
Mike
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
I gotta ask.are you using this list as your own study guide? I've watched
you send over 200 questions to this list that can be easily answered in the
Cisco documentation.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of datucha123
.
DSP related?
Thanks,
Mike
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
the server.
The only problem is they don't have the Cisco 2003 OS CD and UCCX 5.0.02064
build release (Not available on CCO) they need to be able to restore. Seems
the prior engineer left with the media.
If anyone has these please contact me directly.
Thanks!
Mike
Anyone see any issues with the config? When I dial 5000 it just times out.
application
service aa flash:app-b-acd-aa-3.0.0.2.tcl
paramspace english index 0
param number-of-hunt-grps 1
param drop-through-option 1
param handoff-string aa
paramspace english language en
param
(ccie_voice@onlinestudylist.com)
Subject: Re: [OSL | CCIE_Voice] B-ACD problem
I believe you're missing ephone-hunt object with pilot number and list
of DNs to try.
Sergey
On Wed, Mar 27, 2013 at 7:56 PM, Mike mik...@msn.com wrote:
Anyone see any issues with the config? When I dial
I changed the hunt group and still didn't work.
Does anyone have a working B-ACD config with drop through using a VoIP
dial-peer that I can test with? I run script debug and the tcl script isn't
even being invoked.
Thanks.
Mike
From: Suresh Bhandari [mailto:bring...@gmail.com]
Sent
-system full-consult
create cnf-files version-stamp 7960 Oct 12 2013 08:45:50
!
!
ephone-dn 1 octo-line
number 4866 no-reg primary
label Mike - 4866
description 3025254866
name Mike
call-forward busy 8000
call-forward noan 8000 timeout 6
no huntstop
!
!
ephone-dn 2
number 4867
...@onlinestudylist.com] On Behalf Of Mike
Sent: Saturday, October 12, 2013 10:24 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CFNA to CUE issue
I can't call forward no answer to goto CUE from the PSTN. If I hit the
messages button it works fine and if I dial the pilot number
Anthony,
You are wasting your time with these emails. This list is not here to teach
you, it’s here to help you with specific issue you are having while studying
for the lab.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
I successfully registered by CME router and Callmanger to my gatekeeper, issuing 'show zone status' I can see the E164 numbers and 4 digit extensions of CME, but nothing for Callmanger.
When I try to call from CME extension to Callmaanger I see the ARQ getting the the gatekeeper but it send an
I have a 2600 running 12.2(31) connected to my 6500. I have configured dot1q
trunking but cannot ping etween them. From CDP neighbours on the 6500 the
native VLAN is unknown.
Has anyone seen this before, I used the exact same config with a 3745 and it
worked fine but I want to use the 3745
In my 'Add Route Group' configuration page I cannot see my 6608 E1 MGCP
gateway, nor can I see my H.323 Gateway I configured. But I can see my 24port
FXS blade that sits in my 6608.
Can anyone think of any reason for this ? There were a few interesting Cisco
bugs but the workaround of adding
I have set up a lab at work and VPN in during the evening. At the moment I have
IP communicator either getting it's config from the Callmanager or from the CME
router.
Is it possible to have multiple softpone instances running at the same time on
one laptop as this would make things a lot
Hi,
When I make a call from HQ to CME via Gatekeeper the call will not go to Unity
Express in CME. If I make a local call CME to CME it works fine. I tried
various things to try and find out why but could not find the answer. Config
for CME below,
Thanks
Mike
P20-BR2-RTR(config)#do sh run
Hi, I configured a 3745 as a conference bridge and it is registered with CCM
OK. I created a MRGL with this as the only resource in it and assigned it to my
default device pool, which all the phones currently use.
I can make a 3 party conference OK but I do not think it is using the 3745 as I
to G729? I have a
software MTP enabled on the CCM for use on the ICT trunk to the IPIPGW, can you
please confirm whether MTP resources are also required on the IPIPGW even if no
codec transcoding is occuring.
thanks
Mike
This communication, including any attachments, is confidential. If you
Where in the topology are you issuing the show policy-map interface command? HQ
router or BRx router?
what do you qos maps look like?
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Marco Antonio Garcia
Rodriguez [EMAIL PROTECTED]
Sent: Monday,
Hi, just following up on something I mailed about last week.
I have both software and hardware conference resources available but have ONLY
configured the h/w resources in the MRG/MRGL and applied this to the device
pool.
All other setting are default so no local MRGL settings on lines.
to signalling configuration
such as answer-signal group.
If we use the country country use-defaults command, is this enough to ensure
the correct signalling type is set or not?
Are there better examples of E1R2 configuration within the univercd
documentation that you know of?
thanks
Mike
Hi, my understanding is that the CRS Script editor and CUE Script editor cannot
be installed on the same machine, so unless the are installed on different
machines it is unlikely you will need to use both.
Mike
From: senthil natarajan [mailto:[EMAIL PROTECTED
and why the call doesn't reach the mailbox for subscriber 3001.
Any help would be greatly appreciated!!!
thanks
Mike
This communication, including any attachments, is confidential. If you are not
the intended recipient, you should not read it - please contact me immediately,
destroy
removed this command and BINGO!!
thanks
Mike
From: Mike Prestidge
Sent: Thu 31/01/2008 3:39 p.m.
To: ccie_voice@onlinestudylist.com
Subject: SRST VM-integration workaround
Hi,
I'm having trouble getting the SRST voicemail integration workaround working
calls into the
CME BACD script and if so does anyone have an example configuration?
thanks
Mike
This communication, including any attachments, is confidential. If you are not
the intended recipient, you should not read it - please contact me immediately,
destroy it, and do not copy or use any
h245-alphanumeric
codec g711ulaw
no vad
!
cheers
Mike
From: Vik Malhi [mailto:[EMAIL PROTECTED]
Sent: Wed 6/02/2008 4:19 a.m.
To: 'ovais Iqbal'; Mike Prestidge
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] VoIP call into CME
Documentation for Cisco IP Agents Cisco CAD Installation Guide 6.4
Now this documentation has also been moved to a link that is not available in
the lab. Does anyone know an alternative location to find the URL within
Univercd?
Mike
This communication, including any attachments, is confidential
Hi Scott,
the path below is what I had originally used to find the IP Phone Agent URL,
however the fact that it now redirects to a link outside of cisco.com/univercd
means that it is not reachable during the lab exam.
Mike
From: Scott Monasmith [mailto
for the automatic redirect
failed.
Mike
From: Scott Monasmith [mailto:[EMAIL PROTECTED]
Sent: Sat 1/03/2008 10:34 a.m.
To: Mike Prestidge
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] IPCC Phone Agent Service URL - moved from
Univercd
You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions.
C7200-GK(config-gk)#zone prefix local
Greg,
I have seen similar issues before when on the PUB and phones were registered
to the SUB. I usually have to restart the RIS data collector service on
both the PUB and the SUB and it clears the issue.
Regards,
Mike Brooks
CCIE# 16027 (RS)
On 4/21/08, Gregory Jost (grjost) [EMAIL
Also, when configuring without zone prefixes make sure you do not have the
arq reject-unknown-prefix command configured.
Regards,
Mike Brooks
CCIE 16027 (RS)
On 4/21/08, Devildoc [EMAIL PROTECTED] wrote:
Yeah i thought so too since i had it working like that before. But for
some reasons
Hi All,
For the labs in the workbook would I run into any issues if I used 7940s
rather than the 7960s for my home lab ?
Thank you,
Mike Brooks
CCIE# 16027 (RS)
aa-hunt1 3000
param aa-hunt2 3001
param number-of-hunt-grps 3
param queue-manager-debugs 1
voice translation-rule 10
rule 10 /23215/ /3215/
ephone-dn 160
number 23215
call-forward all 5000
translate called 10
- Original Message -
From: jason sung
To: Mike O
Cc
I had this same problem.
The parameter param aa-huntX correlates to the option in the script, example:
param aa-hunt1 1001 --- means option 1 goes to hunt group 1001
param aa-hunt2 2001 --- means option 2 goes to hunt group 2001
and so on.
Remember to reload the scripts after you make a
Jacob,
Try this link
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme40/cme40tcl/40bacd.htm
- Original Message -
From: Jacob Owen [EMAIL PROTECTED]
To: Mike O [EMAIL PROTECTED]; Paul and Bobs [EMAIL PROTECTED];
ccie_voice@onlinestudylist.com
Sent: Sunday, May 18, 2008 3
Looks like you are missing...
param drop-through-prompt .au
-Mike
CCIE #17982
- Original Message -
From: Gregory Jost (grjost)
To: ccievoice
Sent: Monday, May 19, 2008 10:30 PM
Subject: [OSL | CCIE_Voice] BACD drop-through mode
I'm having trouble getting drop-through
I have a little lab running and I can't figure out why I'm not matching voip
dial-peer.Thanks,Mikedebug output belowsh run:dial-peer voice 25 voip
destination-pattern 555 session target ipv4:172.22.10.9!dial-peer voice 20
pots translation-profile outgoing STRIP destination-pattern
would the user experience be when logging into the phone ?
Everything I read says it is a 1:1 relationship between UDPs and
Extension Mobility users. Any documentation explaining otherwise
please let me know.
Thank you,
Mike Brooks
CCIE# 16027 (RS)
Dave/Matt,
Awesome... just what I was looking for. Thank you both.
- Mike
On 7/16/08, Matthew Bynum [EMAIL PROTECTED] wrote:
The 4.x SRND says the same thing:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42media.html#wp1095015
--
Matthew Bynum
On Wed, Jul 16, 2008 at 9
. Is this possible with a Cisco phone ?
If this is the only case this would work then you would think that
Cisco would document these pre-requisites. Perhaps I am confused.
Please help ;-)
Regards,
Mike Brooks
CCIE#16027 (RS)
to not change (trust) or to
override (not trust) the priority of frames arriving on the phone port
from connected devices.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_37_se/configuration/guide/swvoip.html
Regards,
Mike Brooks
CCIE#16027 (RS)
On 7/23/08, Devildoc [EMAIL
set the CoS value, why would you need to use the
switchport priority extend cos 0 ?
Please correct me if I am wrong.
Regards,
Mike Brooks
CCIE#16027 (RS)
On 7/23/08, Nick Marus [EMAIL PROTECTED] wrote:
Unless I misunderstand you, COS is applied to a packet and does not require
a 1q trunk
Hi everyone,
What would cause an IP phone (ip blue) not to hear ringback when
calling a number on the PSTN through an MGCP gateway ?
Phones that are registered with the CME calling the PSTN do receive
ringback, but phones calling through the MGCP gateways do not.
Regards,
Mike Brooks
CCIE#16027
Congrats
Regards,
Mike Brooks
CCIE#16027 (RS)
On 8/15/08, Matthew Bynum [EMAIL PROTECTED] wrote:
CCIE 21753
Thanks to this list and to Vik, couldn't have done it without the boot camp!
--
Matthew Bynum
I'm runnning a 2811 with AIM-CUE and I know this must be a simple fix, but I
can't figure it out. I hit the voicemail button on the phone and it asks me
for an ID, like its not sending the extension digits to the CUE.
Any ideas?
Thanks,
Mike
That did it!..awesome thanks!
- Original Message -
From: Matthew Bynum
To: Mike O
Cc: OSL CCIE Voice Lab Exam
Sent: 2008-08-18 5:48 PM
Subject: Re: [OSL | CCIE_Voice] CUE Voice mail issue
Do you have dialplan-pattern configured?
See this field notice: http
Hi Everyone,
What would cause me not to hear audio on an IPBlue phone when
connected through the Cisco VPN client into a proctor labs rack ? Your
input would be greatly appreciated.
Regards,
Mike
I'm having a small problem trying to get a DID off the PRI to translate into
CUE prompt-management. Below is my config I can't figure it out.
My q931 debug shows 2320 being dropped off on the pri interface.
dial-peer voice 8000 pots
translation-profile incoming prompt-mgt
destination-pattern
Does anyone have a good guide on connecting CME to Call Manager with and
without gatekeepers?
Thanks!
...
Today's Topics:
1. CME connection plar (Diego Macias)
2. IPCC Sync (Javier Cuadros)
3. Call Manager to CME (Mike O)
4. Re: IPCC Sync (Jonathan Charles)
5. Re: Call Manager to CME (Jonathan Charles)
6. Re: Transfer to CUE VM from VoIP (GK) (Michael Gross
I have a 1760 with (2) PVDM-12s and (2) VWIC-2MFT-T1/E1s and I get the
following when I try and configure all 4 ports
First two are fine:
tdm clock T1 0/0 both import onboard internal
tdm clock T1 0/1 both import onboard internal
I try the second card and get this:
Router(config)#tdm clock
VWICs
Why do you use tdm clock command? I have the only
network-clock-participate slot 2 or network-clock-participate wic 0,
and everything works fine.
- Original Message -
From: Mike O [EMAIL PROTECTED]
To: 'OSL CCIE Voice Lab Exam' ccie_voice@onlinestudylist.com
Sent: Wednesday
Well in the lab is all the PSTN connections to the PSTN router PRI's? or is one
or two CAS?
- Original Message -
From: Michael Gross
To: Mike O
Cc: Michael Shavrov ; ccie_voice@onlinestudylist.com
Sent: 2008-09-10 9:27 PM
Subject: Re: [OSL | CCIE_Voice] Lab 1760-V as PSTN
/ 6608?
Any recomendation on which router should go where?
- Original Message -
From: Michael Gross
To: Mike O
Cc: Michael Shavrov ; ccie_voice@onlinestudylist.com
Sent: 2008-09-10 9:49 PM
Subject: Re: [OSL | CCIE_Voice] Lab 1760-V as PSTN with 4 VWICs
That is really up
atleast the written
will be done.
Anyone have a diagram of what the basic lab layout is? oh and btw the layout is
not covered under the NDA.
- Original Message -
From: Michael Gross
To: Mike O
Cc: Michael Shavrov ; ccie_voice@onlinestudylist.com
Sent: 2008-09-10 10:16 PM
\VTGO\Services\bin\services.html
Also, when I open up the services.html file in IE it loads but there
is no content.
Has anyone seen this ?
Thx,
Mike Brooks
CCIE# 16027 (RS)
In CM 4 is there a way to create unassigned DNs ?
In CM 5 and 6 you can create DNs without associating them with a device.
thx,
Mike Brooks
CCIE#16027 (RS)
Thanks Mark.
Do you know if it possible to bulk them in without assigning them to devices ?
thx,
Mike Brooks
CCIE# 16027 (RS)
On Sat, Sep 20, 2008 at 2:03 PM, Mark Snow [EMAIL PROTECTED] wrote:
Hey Mike,
Yes - sort of.
Create a DN on a phone, then delete it from the phone. It will still
Thanks Mark. Its not really for an application. I just noticed the
difference between CM4 and CM5/6 in which my company uses. Having
unnassinged numbers already bulked in makes it easier for
moves/adds/changes. Thanks for the quick response.
Regards,
Mike Brooks
CCIE# 16027 (RS)
On Sat, Sep
I know this is a bit off topic, but I'm trying to create a PSTN switch for
two phone systems behind an 2811 with 3 PRI interfaces. 1 PRI to the PSTN,
1 PRI to PBX 1 and another to PBX2.
Anyone have a basic config?
-Mike
VOIP dial-peer to/from CM ?
Regards,
Mike Brooks
CCIE# 16027 (RS)
Kapil,
I am referring to an H323 gateway not an MGCP gateway. Therefore L3
info is not backhauled to CM.
Regards,
Mike Brooks
CCIE#16027 (RS)
On Sun, Oct 5, 2008 at 3:58 PM, kapil atrish [EMAIL PROTECTED] wrote:
When not in SRST mode, all layer-3 information (DNIS, ANI) are back-hauled
Hi Chris,
Are you getting unknown number ? To me it looks like its getting to
CCM. Does your CSS on your TP contain the internal partition ?
Just a guess ;-)
Regards,
Mike Brooks
CCIE# 16027 (RS)
On Sun, Oct 12, 2008 at 2:38 PM, Chris Parker [EMAIL PROTECTED] wrote:
Hello,
I am having
I had the same issue yesterday. The reset fixed it for me as well.
Mike Brooks
CCIE# 16027 (RS)
On Sun, Oct 12, 2008 at 9:44 AM, Chris Parker [EMAIL PROTECTED] wrote:
I just did a reset 6 command on the 6500 (pod 18 ports are on module 6)
and it reset the blade and it is happy now So
Chris,
Have you tried stopping and starting the CM service on both the pub
and sub and waiting 5 minutes ? If the configuration looks correct
then this may fix it. I have to do this all the time and it resolves
most of my issues.
Regards,
Mike Brooks
CCIE#16027 (RS)
On Sun, Oct 12, 2008 at 3
ideas?
Thanks,
Mike
/0/1:23
bearer-cap Speech
- Original Message -
From: Ryan Hicks
To: 'OSL CCIE Voice Lab Exam' ; Mike O
Sent: 2008-11-03 8:40 PM
Subject: Re: [OSL | CCIE_Voice] Back to back PRI issues
What does your back to back config look like.
Are you emulating isdn network
It appears that the only way to remove the E164 registrations on the
gatekeeper is by using the no-reg command on each of the CMEs
numbers (ie. number 3001 no-reg) and then reloading.
Is this true ? If not, does anyone know of a better/easier method ?
Thx,
Mike Brooks
CCIE# 16027 (RS)
,
Mike Brooks
CCIE# 16027 (RS)
with a voice-class codec assigned.
Regards,
Mike Brooks
CCIE# 16027 (RS)
On Fri, Nov 7, 2008 at 4:53 AM, rob [EMAIL PROTECTED] wrote:
Hi,
I'm testing Workbook 3, lab 2 task 42 and although I have completed the
requirements for this task and can call into the B-ACD via the PSTN and from
CME phones
Yes...internet access is available when using EzVPN.
Mike Brooks
CCIE# 16027 (RS)
On Sun, Nov 9, 2008 at 9:19 AM, Steven Sarte [EMAIL PROTECTED] wrote:
I will be attempting my first try next Saturday using the EzVPN
connection. Will Internet access be available?
Thanks,
Steven
Does anyone know the new paths to use in the lab for IPCC one-button
login url and the IPMA url ?
ie.. www.cisco.com -- support -- select a product --
Regards,
Mike Brooks
CCIE#16027 (RS)
Try using perfmon and watching the cisco locations counters when
making the calls.
Regards,
Mike Brooks
CCIE#16027 (RS)
On Sun, Nov 9, 2008 at 2:38 PM, James Jung [EMAIL PROTECTED] wrote:
Sure I checked it. They are in BR1 region.
-Original Message-
From: Mike Brooks [mailto:[EMAIL
Did you check the device pools/regions your phones are in ? It sounds
like one of the br1 phones is in the HQ region/device pool.
Regards,
Mike Brooks
CCIE#16027 (RS)
On Sun, Nov 9, 2008 at 2:24 PM, James Jung [EMAIL PROTECTED] wrote:
Hi all
A Call is from HQ to BR1 phone 1. BR1 phone 1
that there needs to be a command under the ipipgw
configurations such as allow-connections h323 to h323 to h323. Not
sure.
Has anyone got this to work when hitting 2 incoming dial-peers ?
Thanks,
Mike Brooks
CCIE#16027 (RS)
On Mon, Nov 10, 2008 at 8:35 PM, Vik Malhi [EMAIL PROTECTED] wrote
Little off-topic here, but if I want to have the option of having the caller
press say 5 to get directions or business hours what script would allow me
to play the wav file and either hang up or roll back to the auto-attendant?
Thanks,
Mike
I have the same problem
Michael Brooks
CCIE#16027 (RS)
On Sun, Nov 16, 2008 at 8:18 AM, M.Deniz KIZILCABOLUK
[EMAIL PROTECTED] wrote:
Hi,
I have a lab today but there is a problem with page
http://proctorlabs.com/; I can open other US pages but not
proctorlabs. Nearly 15 min.
I am in.I had to go through each pod in order to find it...
telnet podX.proctorlabs.com and try your username/password on each pod.
Mike Brooks
CCIE#16027 (RS)
On Sun, Nov 16, 2008 at 8:26 AM, Chris Parker [EMAIL PROTECTED] wrote:
Me too ... luckily I looked up my POD number last night
Before you can access the 6500 your VPN connection must be up.
Hopefully you are using ezvpn or you have the right pcf file for your
pod.
Mike Brooks
CCIE#16027 (RS)
On Sun, Nov 16, 2008 at 8:57 AM, M.Deniz KIZILCABOLUK
[EMAIL PROTECTED] wrote:
Ok Thanks,
Also How can I access 6500 ? On TS
PH4 as agent2 then HQ PH3 is logged in as
agent2 as well.
Has anyone ran into this before ?
Thanks,
Mike Brooks
CCIE#16027 (RS)
yes..thats what it is ...thanks Jacob.
On Sun, Nov 16, 2008 at 3:18 PM, Jacob Owen [EMAIL PROTECTED] wrote:
Mike,
Are you using EZVPN and phones at your house as the HQ Phones 3 4? If so,
i found it could be that both phones are seen from IPCC as the same device
(IP) since technically
!
or
dial-peer voice 11 pots
destination-pattern 91[2-9]..[2-9]..
port 0/0:23
forward-digits 11
Thanks,
Mike Brooks
CCIE#16027 (RS)
Congrats Pardeep !!!
Regards,
Mike Brooks
CCIE# 16027 (RS)
On Tue, Nov 25, 2008 at 6:00 PM, Pardeep Singh (pardsing)
[EMAIL PROTECTED] wrote:
Hello Group,
I passed my CCIE Voice yesterday, Thank you Vik and IPExpert team for the
help!
Regards,
Pardeep Singh
[EMAIL PROTECTED]
WK: 1-949
Congratulations Pardeep!!
--
Mike
Which method is preferred for the Lab AutoQos or Manual QoS Configuration ?
What do you feel are the advantages and/or disadvantages of each method ?
Thx,
Mike Brooks
CCIE#16027 (RS)
17179864
ntp server 10.1.200.3
Pod11-BR2-RTR#
Thanks,
Mike Brooks
CCIE# 16027 (RS)
times and it is not working. Ugh..
anyone else having problems ? I have sent a few messages to support
but I am not sure if they are getting them.
Thx,
Mike Brooks
CCIE# 16027 (RS)
doesn't work. Routers are pulling
NTP from the HQ-RTR. I tried configuring the CUE to pull NTP from BR2
and HQ. Still doesn't work. Keep the suggestions coming ;-)
Thx,
Mike Brooks
CCIE# 16027 (RS)
On Sat, Nov 29, 2008 at 10:52 AM, Hardesty, Scott
[EMAIL PROTECTED] wrote:
Make sure you have
be using only one method
of shaping either MQC or Legacy to both BR1 and BR2.
Does this seem correct or is there a way around this ?
Thx,
Mike Brooks
CCIE# 16027 (RS)
1 - 100 of 326 matches
Mail list logo