Hi Scott,
 
it sounds like there are some discrepancies then depending on where you sit the 
lab?  I had my first attempt two weeks ago and this was one of the things I 
tested during the lab.  I tried to reach multiple documents that had been moved 
off the univercd site.  In my case even waiting for the automatic redirect 
failed. 
 
Mike

________________________________

From: Scott Monasmith [mailto:[EMAIL PROTECTED]
Sent: Sat 1/03/2008 10:34 a.m.
To: Mike Prestidge
Cc: [email protected]
Subject: Re: [OSL | CCIE_Voice] IPCC Phone Agent Service URL - moved from 
Univercd ??


This is a common misconception, my friend. It does redirect you outside of 
UniverCD, however, on the redirect page it will prompt you to either click on 
the redirected link or wait 10 seconds for your browser to do it automatically. 
 
If you wait 10 seconds, it will redirect you just fine. However, if you click 
on the link instead it will fail. Trust me.
 
Cheers,
Scott


On Fri, Feb 29, 2008 at 3:25 PM, Mike Prestidge <[EMAIL PROTECTED]> wrote:


        Hi Scott,
        
        the path below is what I had originally used to find the IP Phone Agent 
URL, however the fact that it now redirects to a link outside of 
cisco.com/univercd means that it is not reachable during the lab exam.
        
        Mike
        
        ________________________________
        
        From: Scott Monasmith [mailto:[EMAIL PROTECTED]
        Sent: Sat 1/03/2008 3:56 a.m.
        To: Mike Prestidge
        Cc: [email protected]
        Subject: Re: [OSL | CCIE_Voice] IPCC Phone Agent Service URL - moved 
from Univercd ??
        


        Here is the path for IP Phone agent URL
        
        - DocCD
        - Customer Contact Center
        - Cisco IPCC Express and IP IVR
        - Cisco Customer Response Solution 5.0(x)
        
        - English
        - Documentation for Cisco IP Agents
        
        - Cisco CAD Installation Guide CAD 6.4 for Unified
        -- This will redirect you to a .pdf file. Do a search for http:// 
inside this .PDF and you'll eventually find the URL. However, this document 
does not tell you what variables you need to setup (Pwd, Ext, ID) for the IP 
Phone service.
        
        here is the direct link.
        
http://www.cisco.com/univercd/cc/td/doc/product/voice/sw_ap_to/apps_5_0/english/agents/cad64ig.pdf
        
        Cheers,
        Scott
        
        
        On Tue, Feb 26, 2008 at 4:22 PM, Mike Prestidge <[EMAIL PROTECTED]> 
wrote:
        
        
               It seems that the (annoying) people moving the documents off 
Univercd have now also moved the documents with the URL for IP Phone agents!!
        
               I used to be able to find this by browsing via the following:
        
               Univercd > Customer Contact Software > IPCC Express and IP IVR > 
CRS 5.0(x) > English > Documentation for Cisco IP Agents > Cisco CAD 
Installation Guide 6.4
        
               Now this documentation has also been moved to a link that is not 
available in the lab.  Does anyone know an alternative location to find the URL 
within Univercd?
        
               Mike
        
               This communication, including any attachments, is confidential. 
If you are not the intended recipient, you should not read it - please contact 
me immediately, destroy it, and do not copy or use any part of this 
communication or disclose anything about it. Thank you. Please note that this 
communication does not designate an information system for the purposes of the 
Electronic Transactions Act 2002.
        
        
        
        
        
        
        --
        "There are only 10 types of people in the world: Those who understand 
binary, and those who don't"
        
        




-- 
"There are only 10 types of people in the world: Those who understand binary, 
and those who don't" 

Reply via email to