.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Från: anupam TYAGI [anuf...@gmail.com]
Skickat: den 10 december 2009 12:28
Till
Hi So,
I guess that you meen caller id from a phone registered to CME? Then you use
the name command under the ephone-dn.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: So Gwaai [sogw...@gmail.com]
Skickat: den 13 december 2009 10
How to do what you ask for is described in the VOD DVD. I can’t seem to
remember the chapter, but it’s probably in the Unified Messaging.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: J Hogan [j.jho...@gmail.com]
Skickat: den 13
You need to download them separatly.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Girard, Jeffrey COL MIL USA [jeffrey.gir...@us.army.mil]
Skickat: den 15 december 2009 01:41
Till: ccie_voice@onlinestudylist.com
Ämne: [OSL
you get a match on the outgoing. If you can't get it on the
originating incoming DP you might think of using the loopback DP approach.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Girard, Jeffrey COL MIL USA [jeffrey.gir
No apparent reason that I can come up with.
Roger Källberg
Från: Ken Kov [kck...@yahoo.com]
Skickat: den 16 december 2009 14:57
Till: ccie_voice@onlinestudylist.com
Ämne: [OSL | CCIE_Voice] SRST Ref Assignment in Device Pools
Is there any reason to assign an SRST
Congratulation Adrian :-)
Roger Källberg
Från: Adrian Clinton - Watkins [...@ggr.net]
Skickat: den 17 december 2009 15:45
Till: ccie_voice@onlinestudylist.com
Ämne: [OSL | CCIE_Voice] Another Pass
Just like to take the time to thank Vik for his help
This url has some pretty good info about setting up a home lab environment in
VM.
http://ccie.gresz.ca/
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
-Original Message-
From: crazibug [mailto:crazi...@gmail.com]
Sent: den 18 december 2009 04:23
To: ccie_voice
of the suggested
networks is outside of the above stated, maybe not a problem because of later
additions off networks. But there haven't been any official updates on this, so
as far as we know this is still valid.
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Berry, Matthew J
Hi Sikamuru,
This is an example of a xml file that I have used. Let me know if you need to
have any additional help with this.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Nara Shikamaru [shikam...@kagadis.com]
Skickat
couple of days and book it :-)
Brgds,
Roger Källberg
-Original Message-
From: Amp [mailto:amccar...@cciequest.com]
Sent: den 4 januari 2010 18:18
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Boot Camp March 15 - 26
Hey gang,
I was wondering has registered for or is planning
.
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
-Original Message-
From: Mike Thompson [mailto:mthompson...@gmail.com]
Sent: den 5 januari 2010 02:47
To: 'Amp'; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Printing Proctor Labs
Due to a security
profile configured to get CME to run at all.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com]
Sent: den 8 januari 2010 04:28
To: CCIE Voice OSL (ccie_voice@onlinestudylist.com)
Cc: Berry, Matthew J.
Subject: [OSL | CCIE_Voice] Upgrading
Unity Connection 7.0 can also be installed in VMware.
Roger Källberg
Från: Hough, Earl [earl.ho...@sarcom.com]
Skickat: den 11 januari 2010 12:47
Till: bijan arda; ccie_voice@onlinestudylist.com
Ämne: Re: [OSL | CCIE_Voice] How to insatll Unity 7.x on the PC
Hi Jeff,
Please send me the number that you can receive calls at and I can make some
test calls to your gw if you want.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Jeff Garvas [mailto:j...@cia.net]
Sent: den 14 januari 2010 06:41
To: Otto Sanchez
Cc: OSL Group
Subject: Re
Congrats Alex.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Från: Alex Hannah [alex.han...@gmail.com]
Skickat: den 19 januari 2010 16:46
not be the
case, just use the UCM SIP fw for your SIP CME phones.
I had to use this approach when I tried to get my lab 7962 phone @ home to
work. Funny enough I didn’t have any trouble getting the fw down to my 7960
phones @ home.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21
bite you in the butt if you’re not careful with this kind of
iffy questions.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
As far as I know you need to have the file(s) in the correct format in flash,
ie G729 if you want to use that for your MOH or G711U if that's what you want.
Vik please correct me if I'm wrong.
Brgds,
Roger Källberg
Consultant
Cygate AB
Från: vccie2010 [vccie2
No one that has any thought about this?
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Roger Källberg [mailto:roger.kallb...@cygate.se]
Sent: den 22 januari 2010 09:24
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Lab 12A - UCCX custom script
Hi guys and girls
Hi,
according to what I have been able to understand you will get these versions in
the lab.
CUCM 7.0.1
CME 7.0.1 (IOS 12.4.22T)
UC 7.0.1
CUPS 7.0
UCCX 7.0.1
CUE 7.0
A pretty safe bet is that the version used @ Proctorlabs will be the one that
we can expect to get in the lab.
Brgds,
Roger
Hi Vik,
Thanks for the answer. Cristal clear as always :)
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Vik Malhi [mailto:vma...@ipexpert.com]
Sent: den 25 januari 2010 01:33
To: Roger Källberg; OSL Group
Subject: Re: [OSL | CCIE_Voice] Lab 12A - UCCX custom script
Roger,
I
to excuse me but I’m been up since 5.00AM CET pounding away
on this lab.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
I had also problem at the end of my lab session today, at around 13.45 CET. I
think that's 07.45 EST, but not sure.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Arun Kumar [mailto:arunv...@gmail.com]
Sent: den 29 januari 2010 14:10
To: ccie_voice@onlinestudylist.com; Wayne
did later load the 13A final config and then I saw that the contact for
br1phn2 in the CUPC interface had a field that was named IM. That field
wasn't present in my screen dumps. How should I go about to get that?
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Hi Otto,
thanks a lot. I will try that tomorrow morning, when I have my next lab session
planned. In your time it will be in the middle of the night. I'll let you know
how it goes.
Brgds,
Roger Källberg
Från: Otto Sanchez [o...@ipexpert.com]
Skickat: den 30
Works as explained, thanks for your help Otto.
As a little extra info I can add that you need to send an IM from the IPPM to
the added hqphn2 user in order to be able to add it to the CUPC list of
contacts.
Roger Källberg
Från: Roger Källberg [roger.kallb
had the same
problem with that.
I have turned my head inside out on this now, and probably gone blind. Can
anybody please help me with this?
I think it’s going to make me mental soon ;-)
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel
why's that?
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Från: Roger Källberg [roger.kallb...@cygate.se]
Skickat: den 31 januari 2010 10:41
It should of course been these changes,
interface Virtual-Template200
no service-policy output AutoQoS-Policy-UnTrust
Regards,
Roger Källberg
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb
Hi Akash,
If you do a reactive debug, at what step do you get the problem that sends the
call to the default script? If possible also post your script, so that we can
verify that it's setup as it should.
Also check to see if the CTI RP has a CSS that can see the CTI ports.
Brgds,
Roger
/ LD
\+! / INT
911 / EMERGENCY
Line CSS (site specific)
\+1[^4][^0][^8][2-9]XX /BLOCK-LD
\+! / BLOCK-INT
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
-Original Message-
From: Vik Malhi [mailto:vma...@ipexpert.com]
Sent: den 1 februari 2010 06:28
To: Stephen
Hi,
I just reread the OSPF chapters in my old CCNP course material as a fresh up
for my lab preparation and wonder if someone could tell me if we could, or
should, expect to get a single area or a multiple area topology in the lab?
Regards,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg
Keep in there, you will make it at some stage :-)
Btw, see you on the boot camp in March, I will also go there.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Sound like a db replication issue or possibly, but less likely, the order of
CPE in the call manager group.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: kavi ten [mailto:kaucc...@gmail.com]
Sent: den 4 februari 2010 14:23
To: ccie_voice@onlinestudylist.com
Subject: [OSL
Hi Scott,
Even if you use MGCP, ie backhauled D-channel, you can see the output of deb
isdn q931 on the gateway. It will be locally echoed.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.se
From the same Ask the Expert tread, post 32
routers are running 12.4(20)T2
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Mad Kiwi [mailto:ccievoi...@gmail.com]
Sent: den 10 februari 2010 11:58
To: Jeff Garvas
Cc: ccie_voice@onlinestudylist.com; Saeed IDris; Michael Thompson
is the
2801 Fa0/0 interface that should have a IP from that network range.
And yes the config examples from PL do have DHCP scopes, but these has nothing
to do with your home DHCP scope that you have today in your Linksys router.
That should be kept as is.
Best of luck,
Roger Källberg
Consultant
You can put in two host routes that points the traffic destinated to the UCM
servers to dev null. That would also make the phones to fall over to SRST.
Like this
ip route 10.10.210.10 255.255.255.255 null0
ip route 10.10.210.11 255.255.255.255 null0
Roger Källberg
Consultant
Cygate AB
Eric
then finally it will fail over to the SRST
reference.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Från: Mark Nigh [mn...@netelligent.com
. Or on the remote sites last hop
before leaving the LAN and entering the WAN. That is if you have the control of
that box, if not this could be hard to achieve.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb
Hi Otto!
That was exactly what I was trying to explain, maybe somewhat incoherent but
then again English isn't my native language :-)
Thanks for your answer.
Swedish words of the day,
Tack för hjälpen = Thank you for your help :-)
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg
Hi Ken,
It would be nice if you could take the time to describe what was wrong and what
you did to rectify it.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
Hi Kevin,
I'm a bit off here, cause GK isn't my strongest area, but shouldn't the line
with the default tech-prefix look like this?
gw-type-prefix 1# default-technology
IE, no * after the #
Maybe it's not it, but it's my 2 cent.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217
Please check that your trunk and gw's aren't directly associated with any RP.
If so point the RP to a emty RL and then you will have available devices to add
to your RG. Later you can add the new RG's to the appropriate empty RL.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21
In this case these lines are actually needed, without them the output from sh
gate end won't be in line with the snippet shown in the WB. Ie if not put in
there the solution won't follow the given criteria and that would cost you some
points in the lab.
Roger Källberg
Unified Communication
Hi Mike,
I had exact the same issue today when I did the vol1 11A lab. I got the MWI to
work after I restarted both UCM's and Unity. This made no differnce to the ping
under phone group/server, it still doesn't work.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62
. Also, you can view the DHCP bindings to verify
your phone successfully acquired an IP address.
Copyed from www.markholloway.comhttp://www.markholloway.com
it might help.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
/ccie_voice@onlinestudylist.com/msg13861.html
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Omotayo [mailto:adefilabi...@gmail.com]
Sent: den 27 februari 2010 21:03
To: OSL Group
Subject: [OSL | CCIE_Voice] bacd issue
Hello,
Still on the BACD, when i dial 32143007 from PSTN
You can't have a H.323 gw and a GK registered on the same address in UCM.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Wael Agina [mailto:waelag...@gmail.com]
Sent: den 1 mars 2010 10:18
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] Adding Gatekeeper to CUCM Failure
Dear
Hi Shingei,
This maybe a long shot, but anyway, have you added the sub as a UCM server on
the pub before you tried to add it as a 2nd node?
Roger Källberg
Unified Communication Consultant
Cygate AB
From: ShinGei Yong [mailto:shingei.y...@gmail.com]
Sent: den 1 mars 2010 03:29
To: ccie_voice
Hi Jason,
I'm glad to see that you have some prespective on this and also that your sence
of humor is still there :-)
Hang in there, you'll make it next time.
Regards
Roger Källberg
Consultant
Cygate AB
Från: Jason Granat [...@slash128.com]
Skickat: den
that it makes little sence
to have the g729 session crossing the WAN transcoded to g711 before it leaves
the BR1 site. If it were done in that way the media stream that ends up
crossing the WAN would be g711 and that's not what we want.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons
When does the call fail? If it fails just after you pick up then please try to
add a voice-class codec list to your voip dial-peers that holds both g711 and
g729.
Roger Källberg
Från: Omotayo [adefilabi...@gmail.com]
Skickat: den 4 mars 2010 02:46
Till: OSL
: Troubleshooting Cisco Ip Telephony (2:nd edition)
ISBN: 1587053446
Hi,
I'm just wondering when this book will be out for sale? I found a date
of expected release to be mid September this year, but since that has
come and gone, I guess that there has been some sort of delay.
Brgds,
Roger Kallberg
Roger
Could you do a deb voip dialpeer and a deb voice translation on the BR2 gw and
post the output?
Roger Källberg
Från: Omotayo [adefilabi...@gmail.com]
Skickat: den 4 mars 2010 18:12
Till: Roger Källberg
Kopia: OSL Group
Ämne: Re: [OSL | CCIE_Voice] Calls from hq
for, and is mandatory if no UDP is
created for the user, to get the Mobile Connect to work.
· Association on the line is used for presence.
There are certainly more usage for all of these, but these are the keys as far
as I know.
Brgds,
Roger Källberg
Hi Otto,
Thank you for correcting me about question 4. The scenario that you explained
is exactly what I had experienced, but I remembered wrong when I described it.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
That's the expected behavior. Auto qos won't move the ip rsvp bandwith command.
That's one of the quirks with auto qos.
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Angel Perez [mailto:gorr...@hotmail.com]
Sent: den 10 mars 2010 19:37
To: osl osl
Subject: [OSL
Hi John,
This is the expected behavior of all Cisco IP phones, including CIPC. If it
can't resolve the DNS name of the CPE(s) in the received cnf file it will fall
back to use the TFTP server as a CPE.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: jonn cozak
MVA-
Roger Källberg
Unified Communication Consultant
Cygate AB
From: anupam TYAGI [mailto:anuf...@gmail.com]
Sent: den 15 mars 2010 04:44
To: Otto Sanchez
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA
it is configured , i am able to reach MVA prompts , but when i am
No, during the OEQs you won't have access to any documents.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Ohamien Uhakheme [oham...@gmail.com]
Skickat: den 1 april 2010 13:40
Till: Mike Brooks
Kopia: ccie_voice@onlinestudylist.com
Hi Matthew,
You probably need this command no mgcp timer receive-rtcp, allthough it was
mentioned during the IPX 10-day ILT held the last couple of weeks that it
shouldn't be needed in the IOS version we are running in the lab.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE
Hi Marty,
I just got a mail from Ben, he just sent the hats to me an Matthew. :) He had
been waiting on them from the marketing team @ Cisco.
Brgds,
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Marty Beutler [mailto:martybeut...@hotmail.com]
Sent: den 2 april 2010 01:12
I would say the later. No way you can keep all that information in your head,
plus all other areas covered in the blueprint.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb...@cygate.semailto:roger.kallb...@cygate.se
may need to change
the setting for needed numbers to for example first 7, then back to 10
(default), then back to 7 again. Don’t ask why, but this has fixed the match
for me and also for some other that attended the ILT boot camp in SJ in March.
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric
AllHours_P and
ToD_RollToVM_P, for example Internal_PT or whatever name you’re used to use.
All in all you would have tree PT’s with the dn’s.
I think that this would eliminate the need to have unique CTI ports for each
dn, since you would get an equal match for the CTI RP and the TP.
Roger
The later would be more accurate to the 7965. Difference in the two examples is
that the 79x0 phones do not support Intercom natively, that's why they have a
different description for that in the FS guide. All gen 2 phones do support
Intercom natively.
Roger Källberg
of MWI and look at the debug, you should not get any output. Then
change it back to outdial and resync once more, this time you should get output
in the debug. Check the debug to see that CUE now uses your MWI numbers.
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Omotayo
Hi,
If I'm not completely wrong I do believe that Vik mentioned this at the ILT in
March. As I can recall it's a bug in the CME version that we have in the lab or
possibly it's IOS related.
Maybe Vik can verify/clarify this?
Roger Källberg
Unified Communication Consultant
Cygate AB
From
the ephone-dn,. Copy paste before to notepad, then add it back again. Don't
forget to reapply the dn to the ephone with the button command.
This worked for me when I ran into this quirky behavior, that is before I knew
that a simple reboot would also do it. :)
Roger Källberg
Unified Communication
is pretty strait forward, but if not test
it out in all sort of ways in your lab and I think it will click for you.
Best regards
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: jeremy co [jeremy.coo...@gmail.com]
Skickat: den 15 april
Check that the name of the port in UCM an UC is the same. Default name in UCM
is CiscoUM1-VIx and in UC it's CiscoUM1x, so you need to add the -VI in UC.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Mann Chaddha [mann.chad
Hi Angel,
You need the ccm-manager music-on-hold command even if you want to use local
streamed MOH. As a rule of thumb, always put in that command on all your VGW,
it wont heart anything.
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
DNS is needed.
Roger Källberg
Från: Angel Perez [gorr...@hotmail.com]
Skickat: den 30 april 2010 09:24
Till: vccie2...@gmail.com; Vik Malhi
Kopia: osl osl
Ämne: Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Hi all:
Correct me if i'm wrong, Does CUC need dns to proper
the call to an agent
with the use of more steps that I currently can't remember the name of..
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Cristobal Priego [mailto:cristobalpri...@gmail.com]
Sent: den 6 maj 2010 18:39
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
I believe you can, but you might want to run you question by
supp...@ipexpert.com to be 100% certain.
Roger Källberg
Consultant
Cygate AB
Från: kerboute kerboute [naoufal.kerbo...@cbi.ma]
Skickat: den 7 maj 2010 16:56
Till: ccie_voice@onlinestudylist.com
Have you uncheck Wait for Far End H.245 Terminal Capability Set on the GK
trunk in UCM? You don't want to have that checked when a CUBE will be invoked
in the call path.
Roger Källberg
Consultant
Cygate AB
Från: Mad Kiwi [ccievoi...@gmail.com]
Skickat: den 10
Then remove the checkbox on the inbound phone ( calling party tramsformations
from device pool).
Roger Källberg
Consultant
Cygate AB
mailto:roger.kallb...@cygate.se
Från: mike deal [groganhoc...@gmail.com]
Skickat: den 11 maj 2010 19:58
Till: Pavan
Kopia: OSL
add this to your config
voice service voip
allow h323 to h323
allow h323 to sip
allow sip to h323
allow sip to sip
Brgds,
Roger Källberg
Consultant
___
For more information regarding industry leading CCIE Lab training, please visit
Congratulations.
Roger Källberg
Consultant
Cygate AB
Från: Omotayo [adefilabi...@gmail.com]
Skickat: den 12 maj 2010 02:24
Till: OSL Group
Ämne: [OSL | CCIE_Voice] I Passed!! Certified (CCIE#26063)
Hello All,
I had my exams in SAN JOSE yesterday and got
Hi Angel,
I had a similar experience as you describe it when I did lab 7 vol 2 today,
never figured it out fully before I ran out of time tough. But I'll plan to do
the same lab tomorrow morning, I'll try your settings out and let you know if
that solved my problem.
Best regards
Roger Källberg
Update.
You were totaly right Angel, after I set the location on the BR2 cfb all worked
as expected. I guess we have to add that to the funny feature list to remember.
Roger Källberg
Consultant
Cygate AB
Från: Angel Perez [gorr...@hotmail.com]
Skickat: den 14 maj
, and then I didn't have this problem and I
have verified that my setup is as I did then. I have also checked it more than
one time against the solution in the PG and all seems to be setup exactly as it
should.
Anyone with a bright idea what it could be?
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric
voip bind srcaddr 10.10.200.3
You might also want to splitt your in/outgoing voip dial-peer, in my taste it
makes troubleshooting somewhat easier.
Best of luck
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
roger.kallb
exactly as it
should.
Anyone with a bright idea what it could be?
Brgds,
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Vik Malhi [vma...@ipexpert.com]
Skickat: den 15 maj 2010 18:38
Till: Roger Källberg
Kopia: OSL Group
Ämne: Re: [OSL | CCIE_Voice] Lab 7 vol 2 question 2.6 - Problem with call from
PSTN line 6 to BR2
medium and 6 high
complex calls.
I hope that clear it up somewhat.
Roger Källberg
Från: Cristobal Priego [cristobalpri...@gmail.com]
Skickat: den 18 maj 2010 05:46
Till: OSL Group
Ämne: [OSL | CCIE_Voice] DAOs needed to terminate calls
Hello all
I'm
Is the xcoder registered with the CME? Check with sh sdsp units
Brgds,
Roger Källberg
Från: Wael Agina [waelag...@gmail.com]
Skickat: den 18 maj 2010 19:01
Till: Angel Perez
Kopia: osl osl
Ämne: Re: [OSL | CCIE_Voice] CUBE Issue - Vol2 Lab 8 - BR2 Calls to CUCM
It's a bug. Have been discussed before on the OSL.
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16189.html
Roger Källberg
Unified Communication Consultant
Cygate AB
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun
Also this,
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html
Roger Källberg
Unified Communication Consultant
Cygate AB
From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com]
Sent: den 21 maj 2010 17:21
To: CCIE Voice OSL (ccie_voice@onlinestudylist.com)
Subject: [OSL
Hi Ash,
There are time when you would need to use that match pattern, for example see
this tread on NetPro, https://supportforums.cisco.com/thread/2013151
Roger Källberg
Consultant
Cygate AB
Från: Ashar Siddiqui [siddas...@gmail.com]
Skickat: den 21 maj 2010 22
Hi Ash,
For the CME side have a look at this,
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16751.html
The problem is with CME 7.0
Roger Källberg
Från: Ashar Siddiqui [siddas...@gmail.com]
Skickat: den 23 maj 2010 16:29
Till: Ehab Salem
Kopia
of the
message.
Best regards
Roger Källberg
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Thanks Ash.
Roger Källberg
Från: Ashar Siddiqui [siddas...@gmail.com]
Skickat: den 26 maj 2010 19:24
Till: Roger Källberg
Kopia: OSL Group
Ämne: Re: [OSL | CCIE_Voice] Adapt the playback of messages in UC
Hi Roger,
Go into that user in Unity, go into Edit
number, if not otherwise stated in
the question of cource ;-)
For the transcoding part take a look at this tread,
http://www.mail-rchive.com/ccie_voice@onlinestudylist.com/msg16649.html
Brgds,
Roger Källberg
Consultant
Cygate AB
Från: Matthew Berry [ciscovoiceg
Hi Matthew,
When I did this lab I did is as you described it and as far as I could tell
accomplished the asked for result. This was as you wrote a much easier and
quicker way off achieving what the question asked for, so I would go down that
path any day off the week. :-)
Brgds,
Roger
You might be hitting this well know bug, CSCsl74701
Search on OSL and you will find many references to this. :-)
Roger Källberg
Från: Hobson Kevin [kevin.hobson2...@ntlworld.com]
Skickat: den 7 juni 2010 13:16
Till: ccie_voice@onlinestudylist.com
Ämne: Re: [OSL
and with a TP on the UCM. Just make sure
that this TP is in a PT that only the GK can see in it's incoming CSS. This is
not strictly needed, just makes it a lot easier to troubleshoot if needed.
Brgds,
Roger Källberg
Från: Dani Bug [daniyal.vo...@gmail.com]
Skickat: den 8
I took my lab yesterday, first attempt, just got the score report. I passed :-)
I will write down my strategy once I have landed from the cloud that I'm
currently flying on. :-D
Roger Källberg
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498
Växel: +46108787400
1 - 100 of 186 matches
Mail list logo
