Found) Port(s) None Available
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Yes Patrik, that was the case, Many Thanks :)
On Sun, Feb 21, 2010 at 1:59 PM, Patrick Fischer wrote:
> Did you maybe create route patterns pointing directly to the gateway/trunk?
>
> Regards
> Patrick
>
> 2010/2/21 Wael Agina
>
>> Dear All,
>>
>>I a
q931 doesnt
produce any output.
The rack time ended and i may repeat it tomorrow and see.
Thanks for your reply.
Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
:11:24.345: //-1//SIP/Msg/ccsipDisplayMsg:
Received:
*
*
*Feb 23 10:11:24.345: //-1//SIP/Error/HandleUdpSocketReads: SIP
Message incomplete, trashed*
BR2-RTR#
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Dear Team,
Thanks for replies.
1- I have only one sip phone - xlite - and it can call the other Br2 sccp
[Ip blue] and vice versa.
2- Regarding SIP source interface the lab session ended and i will check it
later, Thanks for the hint.
Regards,
Wael Agina
Dear Randall,
Thanks for feedback.
I will test all back in future session and will take cae of source
interface.
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
.
Kindly if some body faced same issue advise your experianced solutions /
workarounds.
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
some debugs , but call get disconnected.
from HQ Ph 2 SIP or Br1 ph 1 sccp no calls to Br2 sccp / sip ,
Just hear single short tone then silent then fast tone that call not
working.
Any Advise or suggestions ?
Thanks and Best Regards,
Wael Agina
Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
the page has the same value as an entry that already exists in the database.
Please check the corresponding Find List page to verify your entry does not
exist.
Any explination, Idea ?
Regards,
Wael Agina
On Mon, Mar 1, 2010 at 12:12 PM, Wael Agina wrote:
> Dear All,
>
> I am tri
--
> *From*: ccie_voice-boun...@onlinestudylist.com <
> ccie_voice-boun...@onlinestudylist.com>
> *To*: Wael Agina ; OSL Group <
> ccie_voice@onlinestudylist.com>
> *Sent*: Mon Mar 01 04:19:28 2010
>
> *Subject*: Re: [OSL | CCIE_Voice] Adding Gatekeeper to CUCM Failure
&g
aining, please
> visit www.ipexpert.com
>
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
aling via phone hq ph 2 as supposed.
User gwashington has device associated hq phe 2 and primary line 5002.
Any idea ?
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please
our phone cti from
> cupc and let us know the results:
>
> http://blog.ipexpert.com/cti-phone-control-from-cupc/#more-2272
>
> Thanks,
>
>
> On Wed, Mar 3, 2010 at 4:24 AM, Wael Agina wrote:
>
>> Dear All,
>>
>>I've integerate the cups - 10.10.
After reseting UCM pub / sub and the cups , still same case i can login but
no control !
On Wed, Mar 3, 2010 at 3:22 PM, Wael Agina wrote:
> Thanks Otto for the link.
> I followed it, but still can login via cupc client but not controlling the
> phone.
>
> Now i am resseting
Dear's,
IP Blue released new version supports 7962 and other newer.
Version: *2.11.1.307* - Date: *February 23, 2010*
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please
softphone access it using an IP ?
I hope someone has tried this and have an answer.
Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
give me
the images.
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
BARS was available in
> CM4.x..I'm still getting up to speed w/ 7.
> HTH,
> Tom
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.i
prise parameter "Enable dependency record" (Note: This
> is processor intensive).
>
> Cheers,
> Ash>
>
>
> Wael Agina wrote:
>
> Dear All,
>
>I have CUCM 7, CU7, CUCCX 7 running on VM ware.
> My qeustions is how to reset all its setting to initial
o when hq
> dial 1002. it goes to voicemail instead of ringing
>
> Any idea on why its showing Unknown instead of Unregistered
>
> Thanks
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> vis
d lab last month with no luck and found IPE material is
very good along with the Outstanding bootcamp with Vik.
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
ore information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
3006 password cisco
description 32143006
codec g711ulaw
!
dial-peer voice 5115 voip
destination-pattern [15]...
session protocol sipv2
session target ipv4:10.10.200.3
dtmf-relay rtp-nte
no vad
!
Thanks and Best Regards,
Wael Agina
___
For more
Hi
It is already added, G729r8, however i did it to reset, but same issue as
below:
//66/9FB18C6DADAC/SIP/Error/sipSPI_ipip_copy_channelInfo_to_sdp:
filter mis-match, failing call
May 18 16:59:58.874: //-1//SIP/Error/sipSPIGetContentQSIG: No
Inbound Container Created !!!
May 18 16:59
All config seems fine:
voice register global
mode cme
source-address 10.10.202.1 port 5060
max-dn 2
max-pool 2
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Done, but still the same :(
BR2(config)#telephony-service
BR2(config-telephony)#max-dn 25
BR2(config-telephony)#max-ephones 33
BR2(config-telephony)#ip source-address 10.10.202.1
Updating CNF files
CNF files updating complete
BR2(config-telephony)#
BR2(config-telephony)#^Z
BR2#
BR2#
BR2#term mon
Actually I left the lab already, but i am using the voice vlan as the
source.
check :
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface Vlan400
bind media source-in
Yes Roger.
BR2#sh sdspfarm units
mtp-1 Device:XCODE_2 TCP socket:[3] REGISTERED in SCCP ver 17/10
actual_stream:0 max_stream 2 IP:142.5.66.254 51447 MTP Dixieland keepalive
312
Supported codec:
G711Ulaw
G711Alaw
G729
G729a
translate calling 1
dial-peer voice 1 pots
direct-inward-dial
incom called .
*call-block translation-profile incoming Drop-Unknown*
For you example may be it i setting unknown ANI to be 42000 for example, bu
not sure, need to be tested.
Regards,
Wael Agina
On Fri, May 21, 2010 at 11:02 PM, Ashar
running it for study purposes.
Regards,
Wael Agina
On Sat, May 22, 2010 at 3:22 AM, KatGuru wrote:
> Guys,
>
> Can anyone please advise where to download free IP Blue client with
> multiple instances.
>
> Thank you for your help.
>
>
> ___
-exp 3432143... +**3432143...
* !
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
s
> Moataz Mamdouh Tolba
> SEEGYPT
> Website:www.seegypt.com
> Technical Support Engineer
> CCIE # 26129
>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.
Hi Vega,
Try to reister it with CUCME - router - and enable debug udp and debug
tftp events.
Try to analyze the debgs step by steb to find out if it tries to contact the
CME and if it tries to download its TFTP image ?
Try to be simple and enable auto registering on CME.
Regards,
Wael Agina
: -- Session hang and not accepting
any work / input !
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
hi gwenzit,
kindly advise the exact command you use for ssh from router to cucm ?
Regards,
wael agina
On Thu, Aug 4, 2011 at 7:42 PM, gwen...@gmail.com wrote:
> Ssh2 works great from a router
>
> Sent from my HTC on the Now Network from Sprint!
>
>
> - Reply message -
LOCAL(1) 4 u 55 64 371.1091.554
> 19.855
>
>
> synchronised to NTP server (192.168.0.80) at stratum 5
>time correct to within 25 ms
>polling server every 64 s
>
> Current time in UTC is : Thu Aug 4 22:59:48 UTC 2011
> Current time in America/
e: +1 303.328.5590
>
> Fax:+1 978.863.0740
>
> Conf: +1 866-389-9494 #6159225 Host Code: 879 7896
>
> E-Mail: michael.se...@compucom.com
>
> Web: http://www.compucom.com
>
> ** **
>
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Dear All,
Any one know a method to disable Cisco CSA from the web admin not from
cli.
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
CFwdALL to 4001, any caller to 4002 have call fwd to 4001
and hears 4001 VM greeting, not 4002.
I think we should have some kind of options on CUE to take care of
redirecting number as i need to hear the redirecting VM greeting ?
Any Idea ?
--
Thanks and Best Regards,
Wael Agina
Hi Amit,
Thanks.
I tried it, but not working.
I think CME is not fwding the original dnis info to the cue, so it plays
greeting of last called number.
Is there any other idea ?
Regards,
Wael Agina
On Tue, Aug 16, 2011 at 3:02 PM, amit batra wrote:
> try voicemail mailbox-select
.
Regards,
Wael Agina
On Tue, Aug 16, 2011 at 7:00 PM, Randall Saborio wrote:
> I think Amit is on the right track.
>
> Wael, how do you assume that CUE is not sending the original DNIS
> information?
> What type of debug do you use to confirm or reject your assumption?
>
> Not s
Thanks Randall, Roger for your explanation.
For time being i already restarted my lab and not able to troubleshoot right
now, and i will try to recreate it again.
Many thanks all.
Regards,
Wael Agina
On Tue, Aug 16, 2011 at 11:30 PM, Roger Carpio wrote:
> Don't take it personal; he ju
this when i get home..
>
> regards
> Amit
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
--
Thanks and Best Regards,
Wael
BR2
HQ-R1(config-subif)#ip access-group NO_CUCM out
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
?
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
nch=z9hG4bK471D6F
CSeq: 101 ACK
Max-Forwards: 70
Aug 20 11:34:13.425: ISDN Se0/0/0:15 Q931: TX -> CONNECT pd = 8 callref =
0x808D
Aug 20 11:34:13.437: ISDN Se0/0/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref
= 0x008D
SC-R3#
Aug 20 11:34:13.437: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now
c
= 8 callref
= 0x0081
SC-R3#
Aug 20 19:49:32.873: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now
connected to 911 N/A
Aug 20 19:49:32.873: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now
connected to 911 N/A
SC-R3#
Regards,
Wael Agina
On Sat, Aug 20, 2011 at 5:51 PM, Roger Carpio wrote:
> N
Thanks Ashraf, khaled, ALL,
I will try this options on next home study and let you know the results,
Many thanks again.
Regards,
Wael Agina
On Sat, Aug 20, 2011 at 11:57 PM, Ashraf Ayyash wrote:
> Hello Wael ,
>
> from the RmCm >> Resources page you can change the Automatic
&
ase
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visi
line.
Regards,
Wael Agina
On Sun, Aug 21, 2011 at 6:32 PM, Wael Agina wrote:
> I have same issue and not solved, any ideas ?
>
> On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero wrote:
>
>> Hello
>> I have a problem with the MVA, SNR.
>> I make a call from the
ing I can
> only see the calling number, not the name. It is until the call is answered
> that I see both the calling name and number.
> So it is working fine? You are not able to see the calling name until the
> call is answered?
>
> Regards
>
>
> On Sun, Aug 21, 2011 at
_
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> __
the two nodes and from publisher i can
ping the new node - subscriber.
Also I reset the security password on the publisher [using Set *password*user
*security on CLI]*
Any ideas as the connectivity test always fails ?
--
Thanks and Best Regards,
Wael Agina
Hi Prashant ,
Yes I added it on the publisher on server list and on the CM Group.
But still it fails the connectivity test when installing subscriber
software.
Regards,
Wael Agina
On Fri, Nov 26, 2010 at 12:31 AM, Prashant Patel wrote:
> Hi,
>
> Hope you have added the Sub in th
cisco12345 on pub and used it on
sub but no sccess.
Is there any troubleshooting steps can be done on pub during connectivity
test on sub ?
Regards,
Wael Agina
On Fri, Nov 26, 2010 at 1:23 AM, Michael Dietrich wrote:
> Make sure that you are entering the device name of the PUB correctly
> (sp
Dears,
I added it already on pub using its IP address.
Also I activated most needed services.
Do you ask for specific service to be started ? Almost most services added
and Pub is working fine and many phones connected and working.
Regards,
Wael Agina
On Fri, Nov 26, 2010 at 2:41 AM, CCIE
Dear Jason, Shingei,
I am installing 7.0 CUCM om MCS servers.
I did reset the passowrd and reload the pub after applying license.
Do you have any good doc. for troubleshooting this issue ?
Regards,
Wael Agina
On Fri, Nov 26, 2010 at 8:17 AM, Jason Aarons (US) <
jason.aar...@us.didata.
Dear Rogers,
It is new installation with no DNS setup at all.
I havent set any DNS info, and chosed no DNS during installation.
Also when you reach to connectivity test I entered both pub Name and IP
address.
Still not working and connectivity test fails ?
Regards,
Wael Agina
On Fri, Nov 26
his error and i just ignored it and
> proceeded
>
>
> On 26 November 2010 12:21, Wael Agina wrote:
>
>> Dear Rogers,
>>
>> It is new installation with no DNS setup at all.
>> I havent set any DNS info, and chosed no DNS during installation.
>> Also when y
sharing knowledge and info.
regards,
Wael Agina
On Wed, Dec 1, 2010 at 7:58 AM, Wes Ducote wrote:
> Are the two on the same subnet?
>
> Also have you set the clock to the sub to the same of the pub and try to
> use the pub as ntp server?
>
> On Fri, Nov 26, 2010 at 7:57 AM,
Dear All,
Many Thanks for all for your help and ideas.
Problem solved after cisco TAC involvement buy, Re-Installing same CUCM
version, Just new installation as old image seems corrupted.
many Thanks again.
regards,
Wael Agina
On Wed, Dec 1, 2010 at 2:46 PM, Wael Agina wrote:
> Dear
his call status - Talking - and i even
can start recording or voice monitoring but not barge in.
Any Idea on how to activate the barge-in feature for supervisor to barge-in
agent call ?
Many Thanks inadvance.
--
Thanks and Best Regards,
Wael Agina
___
Hi Wayne,
Do IPexpert going to have any phone remote control software , so we can
fully utilize the proctorlabs and test all features ?
I am just asking if you have any future plan regarding this matter.
Many Thanks,
Wael Agina
On Sun, Jan 16, 2011 at 8:43 PM, Wayne Lawson wrote:
> Umm
Dear Wayne,
Many Thanks for this good news, Are you expected it to be live soon ? Any
expected date / time ?
Again it will be great news.
Regards,
Wael Agina
On Mon, Jan 17, 2011 at 12:54 AM, Wayne Lawson wrote:
> Wael,
>
> "Phoneview" @ www.unifiedfx.com will enabl
o control all phones lab?
>
>
> Many Thanks,
>
>
>
> Naoufal.
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Wayne Lawson
> *Sent:* Monday, January 17, 2011 1:55 AM
> *To:* Wael Agina
>
leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi Vinay,
I faced the same issue exactly and had same increasing slip errors.
Kindly make one side as ISDN network as te default setting is ISDN user
side.
Use below command :
Int s0/0/0:15
isdn emulate-protocol network
Regards,
Wael Agina
2011/2/24 Roger Källberg
> Please p
PSTN and modify E1 / T1 numbers to
match your connections.
Also when you setup PSTN , use command [isdn emulate-protocol user] on HQ /
BR1 / BR2 sides to bring up the E1 / T1 as default setting is network side
which is PSTN side.
Hope you nice lab and nice practice.
Regards,
Wael Agina
On Tue
welcome on board :)
On Tue, Mar 15, 2011 at 9:56 PM, Shaun P wrote:
> Thanks Wael for the quick response. I am sure impressed by the helpful user
> interaction on this forum.
>
> Best,
>
> Shaun P
>
> On Tue, Mar 15, 2011 at 9:58 AM, Wael Agina wrote:
>
>> De
CUC ?
* Any Idea ?*
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Dear Shingei,
Asi understand you see output when you call outbound - callPSTN or other
branch.
So make sure that PSTN config is correct and that PSTN send the call to your
BR2 rtr correctly.
Check the debug on PSTN router side.
Regards,
Wael Agina
On Sun, Mar 20, 2011 at 1:54 PM, ShinGei Yong
Hi Randoll, All,
Thanks for sharing your info.
\May I ask you to paste your sample DNS config part on your HQ RTR.
Regards,
Wael Agina
On Tue, Mar 22, 2011 at 4:31 AM, Randall Saborío Cubero
wrote:
> I usually do all the DNS on the HQ router. The configuration is all on
> t
crrectly ?
i have 7970 and 7961, 7941 phones.
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
lab and I highly doubt we would ever be askes to edit a background image in
> the lab.
> -Original Message-
> From: Wael Agina
> Sender: ccie_voice-boun...@onlinestudylist.com
> Date: Tue, 22 Mar 2011 13:27:45
> To:
> Subject: [OSL | CCIE_Voice] creat
;
> ip host uk.local mx 0 CUE.uk.local
>
>1.
>
>Allow the router to do domain lookups, define DNS server to send
>queries to and define default domain to append to domain lookups.
>
> ip domain lookup
>
> ip name-server 10.10.110.1 208.67.222.222
>
> i
,
Wael Agina
On Sun, Mar 27, 2011 at 1:52 AM, Shaun P wrote:
> Hi Voicers:
>
> I have a home lab with 2811 as PSTN router and a 2522 as frame relay
> router. Do I need to add a serial interface to my PSTN router and connect it
> to the frame relay router? I see the IPexpert PSTN configu
Dear SHaun
IP expert has two models of numbering though volume two.
So if you checked you will find that you can use one model only and arrange
yourself with it.
I am doing this in my home lab and doing all IPX labs.
Regards,
Wael Agina
On Sun, Mar 27, 2011 at 7:19 PM, Shaun P wrote
international / DNIS international ?
I am little confused in this point, so kindly correct it for me.
--
Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
79 matches
Mail list logo