Have you tried using Forwarded Routing Rules under Call Routing in Unity? I
had the issue where hunt group was forwarding using different extension
number then the one specified under settings in the hunt pilot. I used RTMT
to identify correct extension being presented to Unity then made routing
Should have mentioned I'm on 8.6.
div Original message /divdivFrom: Devakanth Gangavarapu
devakanth2...@gmail.com /divdivDate:07/02/2014 1:30 PM (GMT-06:00)
/divdivTo: Esteban Moreno esteban_mor...@hotmail.com /divdivCc:
ccie_voice@onlinestudylist.com,Dharambir kumar varma
In preparation for the collaboration lab I have been on the search for 9971
IP phones. After searching high and low I found the best price on eBay. The
seller name is sud6930. I have purchased a total of three 9971 from this
seller for 179-189 WITH the camera. I am in NO way affiliated with this
:: Collaboration / Voice / RS
:: World-Class Certification Training
Direct: +1.810.326.1444
:: Free Videos
:: Free Training / Product Offerings
:: CCIE Blog
:: Twitter
On May 30, 2014, at 7:04 AM, Mike O'Nan mdona...@gmail.com wrote:
In preparation for the collaboration lab I have been on the search
I had this issue on 8.6. You must download the device pack from Cisco and then
reboot all of your CUCM servers before the phone will register.
div Original message /divdivFrom: Marcos Cardoso
mecard...@gmail.com /divdivDate:05/14/2014 5:49 AM (GMT-06:00)
/divdivTo: Dharambir
CUCM or CUCME?
Type of GW?
PRI I'm assuming?
debug isdn q931 and make sure you are sending the desired phone number. If
that is fine then ask the provider to set up call screening to pass your DIDs.
div Original message /divdivFrom: Dharambir
dharambi...@gmail.com
Hello all,
I have CUCM 8.6 with an MGCP GW at a remote site. User A makes a call with no
issues. User B receives or makes a call at the same time that A is on the phone
then B can hear A'sx conversation. It doesn't seem to be 2 way in that when
they can hear the call, they tell the customer
Sometimes in our environment they ask to delete the extension as a person has
left and don't want to hear their phone ring. I am wondering if there is a way
to dial 911 when there is no DN associated with the phone. Any ideas how I can
make this work?
I have roughly 200 remote sites with MGCP
I am a bit confused with SLRG and the line device approach. I have it working
but I am trying to figure out how to efficiently use POTS lines to make the 911
call. My current environment is many sites with a MGCP GW at each site with a
PRI and POTS for 911. Any suggestions?
Hope someone can help with this issue I'm having. I am using ucm 8.6 with mgcp
gateways with a pri on the gw. Any user at the site can place a LD call and it
work fine...second user tries to make an LD call and they get reorder tone when
there are available channels. Could anyone give some
list get exhausted and need a rest
Do you have traces for the failing call ?
Moataz
-Original Message-
From: Mike O'Nan mdona...@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Thu, 30 Jan 2014 08:29:46
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
off the top of my head?
On Jan 30, 2014 9:40 AM, Mike O'Nan mdona...@gmail.com wrote:
Here are the debugs from the MGCP GW:
RTR-02#debug isdn q931
RTR-02#debug ccm-manager backhaul packets
Call Manager backhaul packets debugging is on
RTR-02#
Jan 30 08:19:12.546:
cmbh_rcv_callback
Pattern is set off net and I fixed the secondary dial tone...still get
reorder tone on 2nd LD call. Any ideas from the debugs I provided?
On Jan 30, 2014 9:45 AM, Mike O'Nan mdona...@gmail.com wrote:
I just noticed in the trace Outside Dial Tone = NO. I have also confirmed
the LD pattern
)
/divdivTo: Mike O'Nan mdona...@gmail.com /divdivCc:
ccie_voice-boun...@onlinestudylist.com,ccie_voice@onlinestudylist.com
/divdivSubject: Re: [OSL | CCIE_Voice] 2nd LD call fails /divdiv
/divI can see the release is coming from the PSTN due to invalid information
elements
Regards,
Moataz Tolba
14 matches
Mail list logo