Re: [OSL | CCIE_Voice] IPPM service failed
Does the user have CTI control over all the phones? On Jul 17, 2013, at 4:40 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: folks, i got strange issue in my IPPM service. I verified using System troubleshoot in CUPS all looks good and i have config as per cisco doc. Also the url is verified correct. - When i press IPPM service thru phone at HQ and SB sites, it gave me error: You were trying to access IP Phone Messenger service from a device not provision on Cisco call manager server - However when I press IPPM service using SC sites phones, it prompt me for PIN : Just after I input PIN information, it gave me error : Login failed . The user is NOT assigned or is trying to login to a node that is not his/her home node. Please Assign the user or select IPPM service that run on home node. any ideas what is wrong ? K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPPM service failed
You need to create an application user, have it control the phones needing the service. This username and pw would need to match the username and password configured on CUPS Ex On Jul 17, 2013, at 7:26 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: do u mean : - End User configuration , and check Allow control of device from CTI ? - End user configuration, Group : - standard cti enable - standard ccm end user - standard CTI Allow control of All Devices I did above, but still same error K From: Randall Crumm rrcr...@yahoo.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, July 17, 2013 6:34:48 PM Subject: Re: [OSL | CCIE_Voice] IPPM service failed Does the user have CTI control over all the phones? On Jul 17, 2013, at 4:40 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: folks, i got strange issue in my IPPM service. I verified using System troubleshoot in CUPS all looks good and i have config as per cisco doc. Also the url is verified correct. - When i press IPPM service thru phone at HQ and SB sites, it gave me error: You were trying to access IP Phone Messenger service from a device not provision on Cisco call manager server - However when I press IPPM service using SC sites phones, it prompt me for PIN : Just after I input PIN information, it gave me error : Login failed . The user is NOT assigned or is trying to login to a node that is not his/her home node. Please Assign the user or select IPPM service that run on home node. any ideas what is wrong ? K ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Voice Lab Preparation douts - Lab scheduled
I suggest Ipexpert especially since you are asking on this distribution list Don't you think? Randall Sent from my iPad On Jul 16, 2013, at 7:53 PM, aman sinha aman.i...@gmail.com wrote: Hi All, I have my Lab setup done and have started practicing. On technical side, I have 24 hrs Lab access, so i can practice and get better on it. I have not taken any professional help from any vendors. Till now all my learning is self study and job exp. only. Do you know which vendor will be good to provide Lab scenarios which will be more similar to actual Lab questions. I have 2-3 year old question papers which contain 5 Labs. Are there total 8 scenarios in actual Lab exam ? do you have any idea on this ? Although i believe i should be able to solve any scenario on that particular day. But i should not leave behind any scenarios that are already present in market. Which vendor do you support? Also we can support each other on the Lab attempt strategy so that we don't miss any tricks which can reduce our configuration time. Regards, Aman ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Five-Lab, Self-Study Challenge -- Lab #2 Gatekeeper
I think I had issues with that setup too. Take a look at the pstn router config and check it for any errors Randall Sent from my iPad On Jun 25, 2013, at 7:40 PM, Todd Carswell tcar0...@gmail.com wrote: Hi, Everyone! I'm working on Tasks 4.4 - 4.6 of Lab #2 in the Five-Lab Self-Study Challenge. The instructions say that the PSTN phone should ring, but the call will not get nailed up because of the Wait for Far end TCS checkbox being enabled in CUCM. My Problem: The call is NEVER ringing the PSTN phone. Below are my configs and debugs from both the Site A Router as well as the PSTN Router. Can someone put a second set of eyes on this for me? Thanks in advance!!! Site A Router Configuration and Debugs: A-RTR-HQ-CCIE-V-IP-Expert-Lab-1#sh run | begin gatekeeper gatekeeper zone local GK ipexpert.com 10.10.100.1 zone local ViaGK ipexpert.com zone remote backbone ipexpert.com 10.10.100.2 1719 outvia ViaGK zone prefix backbone 011* no shutdown ! voice service voip allow-connections h323 to h323 ! gateway timer receive-rtp 1200 ! dial-peer voice 119167 voip destination-pattern 0119167T session target ras incoming called-number 0119167 dtmf-relay h245-alphanumeric no vad ! ! interface FastEthernet0/0.103 encapsulation dot1Q 103 ip address 10.10.210.1 255.255.255.0 h323-gateway voip interface h323-gateway voip id ViaGK ipaddr 10.10.100.1 1719 h323-gateway voip h323-id CUBE h323-gateway voip bind srcaddr 10.10.210.1 ! Gatekeeper Registrations: A-RTR-HQ-CCIE-V-IP-Expert-Lab-1#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.210.1 1720 10.10.210.1 50944 ViaGK H323-GW H323-ID: CUBE Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1049480 10.10.210.1057896 GKVOIP-GW H323-ID: GK_Trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1145590 10.10.210.1158184 GKVOIP-GW H323-ID: GK_Trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 Output from debug gatekeeper main 10: A-RTR-HQ-CCIE-V-IP-Expert-Lab-1# Jun 25 21:51:04.210: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup Jun 25 21:51:04.210: ////GK/gk_rassrv_arq: arqp=0x4A99C484,crv=0x3, answerCall=0 Jun 25 21:51:04.210: ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/gk_dns_query: No Name servers Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_get_addrinfo: (011916745738932) Tech-prefix match failed. Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_get_addrinfo: (011916745738932) Matched zone prefix 011 and remainder 916745738932 Jun 25 21:51:04.210: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x4A131DE4 Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone: matched zone is GK, A-RTR-HQ-CCIE-and z_invianamelen=0 Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x4A8FBBC4 Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone: matched zone is backbone, and z_outvianamelen=5 Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone and z_outvianamep=ViaGK Jun 25 21:51:04.210: //8079F8DA0300/8079F8DA0300/GK/rassrv_arq_select_viazone: Received ARQ for a zone (backbone) that has an outviazone (ViaGK) specified. Pick an IP-IP gateway in that viazone. Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: zonep: 0x4A998278, tpp: 0x0, current_endpt: 1 Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: Selecting any IPIPGW. qelemp.head=0x4A8BA83C, use_count=1, current_endpt=1 Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: Gateway selection will start at the top of the linked list. use_count=1, current_endpt=0 Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: qelemp=0x4A8BA83C, loop_count=0 Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: Examining tgwp 0x4A8E4AF8, g_supp_prots: 0x50 qelemp: 0x4A8BA83C, loop_count: 1 Jun 25 21:51:04.210: ////GK/gk_gw_select_ipipgw_random: Found an IPIPGW. tgwp: 0x4A8E4AF8, endptsigIP: 10.10.210.1, endptrasIP: 10.10.210.1, zone: ViaGK Jun 25
Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
is your database replication status good? Change the MAC address of one of your HQ phones in CUCM. Then put that phone in SC and see if you can register it? Did you delete any unassiged DN's Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Pavan K pav.c...@gmail.com; rrcr...@yahoo.com rrcr...@yahoo.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Bill Lake whl...@gmail.com Sent: Thursday, June 13, 2013 9:01 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM tks Pavan, look like not CTL issue, because when i switch this particular phone to UCM DHCP , it get DN but when i move back to SC router DHCP, i did not From: Pavan K pav.c...@gmail.com To: karen.johnson...@yahoo.ca; rrcr...@yahoo.com Cc: ccie_voice@onlinestudylist.com; Bill Lake whl...@gmail.com Sent: Wednesday, June 12, 2013 5:52:18 PM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Karen, Check if your phone has an ITL/CTL installed. Erase them and see if the changes take affect Do you see the phone as registered in UCM ? On Jun 12, 2013 5:23 PM, Randall Crumm rrcr...@yahoo.com wrote: Did you try to auto register the phones? Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Bill Lake whl...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 1:18 PM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM hi Bill, yes i got it from SC router, and i tried to ping UCM as well from the voice int vlan of SC and it works for the ping. but still not get the DN k From: Bill Lake whl...@gmail.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 11:55:37 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Where are you getting your dhcp at sc? If it is sc rtr then you could have it right and just no access to CUCM So try ping (CUCM ip) source vlan (voice #) and confirm the voice vlan has connectivity to CUCM Sent from my iPhone On Jun 12, 2013, at 11:29 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: hi all, Phones are getting the ip address and option 150 from SC router DHCP. However the phones do not show DN or extension. (only blue image background) When I checked the Network setting in phone (ip,subnet, TFTP all showing correctly) - What is the cause phone not able to pick up the DN config from UCM (in UCM show the phones registered with DN) ? - I have also restart the TFTP and UCM. - here is my diagram : phone --- switch--- SC router (DHCP) tks for help ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
I dont think she tried to register on CUCM Have a great day! Thanks, Randall From: Bill Lake whl...@gmail.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: Randall Crumm rrcr...@yahoo.com; Pavan K pav.c...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Thursday, June 13, 2013 10:46 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Not sure it is firmware issue if you can register via UCM dhcp but not IOS dhcp On Thu, Jun 13, 2013 at 12:33 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: database is good. i think as per Micahel mention , firmware issue, i will test and confirm From: Randall Crumm rrcr...@yahoo.com To: Karen Johnson karen.johnson...@yahoo.ca; Pavan K pav.c...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Bill Lake whl...@gmail.com Sent: Thursday, June 13, 2013 10:51:52 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM is your database replication status good? Change the MAC address of one of your HQ phones in CUCM. Then put that phone in SC and see if you can register it? Did you delete any unassiged DN's Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Pavan K pav.c...@gmail.com; rrcr...@yahoo.com rrcr...@yahoo.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Bill Lake whl...@gmail.com Sent: Thursday, June 13, 2013 9:01 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM tks Pavan, look like not CTL issue, because when i switch this particular phone to UCM DHCP , it get DN but when i move back to SC router DHCP, i did not From: Pavan K pav.c...@gmail.com To: karen.johnson...@yahoo.ca; rrcr...@yahoo.com Cc: ccie_voice@onlinestudylist.com; Bill Lake whl...@gmail.com Sent: Wednesday, June 12, 2013 5:52:18 PM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Karen, Check if your phone has an ITL/CTL installed. Erase them and see if the changes take affect Do you see the phone as registered in UCM ? On Jun 12, 2013 5:23 PM, Randall Crumm rrcr...@yahoo.com wrote: Did you try to auto register the phones? Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Bill Lake whl...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 1:18 PM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM hi Bill, yes i got it from SC router, and i tried to ping UCM as well from the voice int vlan of SC and it works for the ping. but still not get the DN k From: Bill Lake whl...@gmail.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 11:55:37 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Where are you getting your dhcp at sc? If it is sc rtr then you could have it right and just no access to CUCM So try ping (CUCM ip) source vlan (voice #) and confirm the voice vlan has connectivity to CUCM Sent from my iPhone On Jun 12, 2013, at 11:29 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: hi all, Phones are getting the ip address and option 150 from SC router DHCP. However the phones do not show DN or extension. (only blue image background) When I checked the Network setting in phone (ip,subnet, TFTP all showing correctly) - What is the cause phone not able to pick up the DN config from UCM (in UCM show the phones registered with DN) ? - I have also restart the TFTP and UCM. - here is my diagram : phone --- switch--- SC router (DHCP) tks for help ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
Wan Qos on one side? Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 9:29 AM Subject: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM hi all, Phones are getting the ip address and option 150 from SC router DHCP. However the phones do not show DN or extension. (only blue image background) When I checked the Network setting in phone (ip,subnet, TFTP all showing correctly) - What is the cause phone not able to pick up the DN config from UCM (in UCM show the phones registered with DN) ? - I have also restart the TFTP and UCM. - here is my diagram : phone --- switch--- SC router (DHCP) tks for help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
try to auto register the phones as opposed to already having a config in CUCM Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Randall Crumm rrcr...@yahoo.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 10:51 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM no Qos enable yet From: Randall Crumm rrcr...@yahoo.com To: Karen Johnson karen.johnson...@yahoo.ca; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 11:36:26 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Wan Qos on one side? Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 9:29 AM Subject: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM hi all, Phones are getting the ip address and option 150 from SC router DHCP. However the phones do not show DN or extension. (only blue image background) When I checked the Network setting in phone (ip,subnet, TFTP all showing correctly) - What is the cause phone not able to pick up the DN config from UCM (in UCM show the phones registered with DN) ? - I have also restart the TFTP and UCM. - here is my diagram : phone --- switch--- SC router (DHCP) tks for help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM
Did you try to auto register the phones? Have a great day! Thanks, Randall From: Karen Johnson karen.johnson...@yahoo.ca To: Bill Lake whl...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 1:18 PM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM hi Bill, yes i got it from SC router, and i tried to ping UCM as well from the voice int vlan of SC and it works for the ping. but still not get the DN k From: Bill Lake whl...@gmail.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, June 12, 2013 11:55:37 AM Subject: Re: [OSL | CCIE_Voice] Phone not pick up TFTP or config from UCM Where are you getting your dhcp at sc? If it is sc rtr then you could have it right and just no access to CUCM So try ping (CUCM ip) source vlan (voice #) and confirm the voice vlan has connectivity to CUCM Sent from my iPhone On Jun 12, 2013, at 11:29 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: hi all, Phones are getting the ip address and option 150 from SC router DHCP. However the phones do not show DN or extension. (only blue image background) When I checked the Network setting in phone (ip,subnet, TFTP all showing correctly) - What is the cause phone not able to pick up the DN config from UCM (in UCM show the phones registered with DN) ? - I have also restart the TFTP and UCM. - here is my diagram : phone --- switch--- SC router (DHCP) tks for help ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE written exam validity
Your written is valid for 3 years period.You can go to VUE and get a score report sent to you. You need this information to register for your lab. You need to take your 1st attempt within 18 months of passing your written and then the next one within 12 months of the first one. Have a great day! Thanks, Randall From: sanity insanity networksanitytoinsan...@gmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, June 7, 2013 9:34 AM Subject: [OSL | CCIE_Voice] CCIE written exam validity Hi All, 1) How long is a ccie written ( Passed ) exam valid? 2) If you fail a lab attempt while your ccie written is valid does your ccie written exam validity get extended? 3) Where can I check the validity of my written exam ( passed) status? I checked the Cisco certification website but it does not give me any details on my written exam. - MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Lab for Sale - I passed my lab
HI, I have a home lab for sale 26xxXM router - configured with VPN to Proctor Labs 3550 switch 7961 phones X2 7960 phone x1 7965 phone X1 7070 phones X2 power bricks x2 Private email if you are interested Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Home Router, switch and Phones for Sale -- I just passed!
Hi, I have a router, POE switch and phones for sale. Everything is configured and works with Proctorlabs PODS VPN access. This is what I used to pass my lab. PM me if you are interested. Router 26xxXM Switch 35xx POE phones 7960 x 1 for PSTN 7961 x 2 7965 x 1 7070 x2 Have a great day! Thanks, Randall CCIE #39411___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Krishna, I configured tones and it worked. Please post your config Have a great day! Thanks, Randall From: Krishna vinayak_...@yahoo.com To: Bruno Nonogaki brun...@gmail.com; Kevin Spicer ke...@kevinspicer.co.uk Cc: Online Study ccie_voice@onlinestudylist.com Sent: Thursday, October 18, 2012 12:07 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW all, added to this question it needs tones for callers who join and who leave the conference.. i configure voice class custom-cptones, assigned frequency and cadency but still cannot hear any join or leave tones.. i also assigned this cptones to dspfarm profile as well... any idea what else it needs to make this work.. thank you krishna. From: Bruno Nonogaki brun...@gmail.com To: Kevin Spicer ke...@kevinspicer.co.uk Cc: Online Study ccie_voice@onlinestudylist.com; Krishna vinayak_...@yahoo.com Sent: Wednesday, October 17, 2012 4:05 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Kevin, This approach sounds good. I will try tomorrow and let you know! Thanks, Bruno On Wed, Oct 17, 2012 at 5:32 PM, Kevin Spicer ke...@kevinspicer.co.uk wrote: Another slightly different idea... Instead of a dummy ephone-dn how about using a voip dial-peer... Voice Serv voip Allow h to h Dial-p v 4321 voip Destination-p 4321 Incoming called-number 4321 Session target ipv4:x.x.x.x Code g711u On 17 Oct 2012 20:33, Bruno Nonogaki brun...@gmail.com wrote: Krishna, By doing this, ephones that doesn't have after-hours exempt cannot join the conference. And neither the PSTN Phone. I am trying to work with cor lists, but no success: dial-peer cor custom name meetme dial-peer cor list to-meetme member meetme dial-peer cor list block-meetme ephone-dn 10 octo number 4321 corlist outgoing to-meetme conference meetme ephone-dn 1 octo ! -- no access to meet-me number corlist incoming block-meetme ephone-dn 2 octo ! -- access to meet-me, no corlist applied number Ephone-dn 1 can initiate meetme and PSTN phones can join it. Ephone-dn 2 cannot initiate meetme, but it is unable to join. I tried to setup another ephone-dn with a forward all to meet-me number, but it doesn't work. Very tricky question... if you find the answer, please post it! Regards, Bruno On Wed, Oct 17, 2012 at 4:22 PM, Krishna vinayak_...@yahoo.com wrote: Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank youkrishna. From: Rrcrumm rrcr...@yahoo.com To: William Bell b...@ucguerrilla.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, October 17, 2012 2:03 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP
[OSL | CCIE_Voice] Meet Me question - CME GW
Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CCIE Written expiration question
Hi, I have a question about my written CCIE test. I understand you have to take your first lab attempt within 18 months and the next one 12 months afterwards. I have done that. My question is there a cap at 3 years where no matter how many times I have taken the lab, do I need to take the written again or does the written get extended for another 12 months? Also does anyone know an email or contact person I can ask at Cisco. Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Written expiration question
HI, I received a reply back from Cisco. I wanted to confirm. You do only have 3 years for your written test. Then you need to retake it. Thanks everyone for you help! Have a great day! Thanks, Randall From: Mohamed Gazzaz mgaz...@hotmail.com To: leslie.me...@lvs1.com; rrcr...@yahoo.com; ccie_voice@onlinestudylist.com Sent: Thursday, October 11, 2012 9:39 AM Subject: RE: [OSL | CCIE_Voice] CCIE Written expiration question You have to take the written exam again if you don't pass the lab within 3 years of passing the written exam. http://www.cisco.com/web/learning/le3/ccie/policies/index.html#~Written Candidates must make an initial attempt of the CCIE lab exam within 18 months of passing the CCIE written exam. Candidates who do not pass must re-attempt the lab exam within 12 months of their last scored attempt in order for their written exam to remain valid. If a candidate does not pass the lab exam within three years of passing the written exam, he or she must retake the written exam before being allowed to attempt the lab exam again Cert Support page http://ciscocert.force.com/english Regards, Mohamed Gazzaz From: leslie.me...@lvs1.com To: rrcr...@yahoo.com; ccie_voice@onlinestudylist.com Date: Thu, 11 Oct 2012 16:25:58 + Subject: Re: [OSL | CCIE_Voice] CCIE Written expiration question As far as I know… If you take one lab a year then your golden on you written Leslie From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm Sent: Thursday, October 11, 2012 9:20 AM To: Online Study Subject: [OSL | CCIE_Voice] CCIE Written expiration question Hi, I have a question about my written CCIE test. I understand you have to take your first lab attempt within 18 months and the next one 12 months afterwards. I have done that. My question is there a cap at 3 years where no matter how many times I have taken the lab, do I need to take the written again or does the written get extended for another 12 months? Also does anyone know an email or contact person I can ask at Cisco. Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Unity Connection
Hello, I have never seen this before. I configured the servers under the phone system and can ping the servers. Then I configured the servers under port group and when I ping the servers I get a time out. I reset the group, even deleted and created it again. same result. Any thoughts? Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Anyone taking the test in the next two weeks?
Hi, If you are taking your test in the next two weeks and would like to collaborate send me an uni-cast email. I am taking mine next week as well. Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Desktop Administrator
Hello, I was working the new 5 labs lab 1. It asks to modify the screen for an UCCX agent to see the number of calls in queue. The custom field that needs to be created, per the DSG, is callinq I looked in the admin guide and could not find this only the others listed already. Does anyone know where I can reference the available fields? Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Desktop Administrator
Hi Steven, Are you saying the UCCX script makes reference to the callerinq field somehow? Have a great day! Thanks, Randall From: Steven Sarrick (ssarrick) ssarr...@cisco.com To: Randall Crumm rrcr...@yahoo.com; Online Study ccie_voice@onlinestudylist.com Sent: Friday, September 28, 2012 12:42 PM Subject: Re: [OSL | CCIE_Voice] Desktop Administrator If you look in the solutions guide tho is a custom field you create and reference in your script. You can call it anything you want, but you have to create it. Steven Sarrick SYSTEMS ENGINEER.SALES ssarr...@cisco.com Phone: +1 412 237 6338 Mobile: +1 412 480 3861 Think before you print.This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: Randall Crumm rrcr...@yahoo.com Reply-To: Randall Crumm rrcr...@yahoo.com Date: Friday, September 28, 2012 3:21 PM To: Online Study ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Desktop Administrator Hello, I was working the new 5 labs lab 1. It asks to modify the screen for an UCCX agent to see the number of calls in queue. The custom field that needs to be created, per the DSG, is callinq I looked in the admin guide and could not find this only the others listed already. Does anyone know where I can reference the available fields? Have a great day! Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] WB 2 Lab 2 UCCX questions
Thanks Bill, That what i was suppose to do. I just didn't have the example .aef file. I saw that on the other labs. Have a great day! Thanks, Randall From: William Bell b...@ucguerrilla.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, September 23, 2012 8:32 AM Subject: Re: [OSL | CCIE_Voice] WB 2 Lab 2 UCCX questions Randall, 1. I am trying to get music-on-hold to work when the caller is in queue. Couldn't you use the Call Hold step, followed by wait time of 15s, and then Call UnHold? 2. It also says to play the in queue prompt every 15 seconds, and if the call is in queue over 60 seconds terminate it. I think this means play prompt 4 times and them terminiate call or does it mean play prompt 3 times and terminiate at 4th delay. I read this as MoH/Prompt Playout every 15s for 60s. So, that is 4x. It is odd though because if you follow the instructions exactly then on the final play out you have: Music-Please wait followed by Number not available. I think it is better to play the Please wait prompt followed by music. In that arrangement you don't confuse callers. BUT this is the lab, not real life so following the language of the question I would do something like this: Set LoopCnt=0 :Queue_Loop if (LoopCnt 3) true: GoTo Give_it_Up false: Call Hold Wait 15s Call UnHold Play Prompt LoopCnt++ GoTo Queue_Loop :Give_it_Up Play Prompt SorryWeAreUnprofessional-CallBack.wav 3. I do not see where I can download the WB 2 .aef scripts. Can someone help me with this? Good question. I just downloaded the .zip file from ipExpert and it doesn't have an .aef for Lab 2. It has 6,7,8,9, and 10. -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Sep 22, 2012, at 7:47 PM, Randall Crumm wrote: Hello, 1. I am trying to get music-on-hold to work when the caller is in queue. I am able to make the ringback work. Any suggestions? I looked at the DSG and it does not seem to address the MOH in queue. 2. It also says to play the in queue prompt every 15 seconds, and if the call is in queue over 60 seconds terminate it. I think this means play prompt 4 times and them terminiate call or does it mean play prompt 3 times and terminiate at 4th delay. 3. I do not see where I can download the WB 2 .aef scripts. Can someone help me with this? Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX question
Hello, I have a question. What is the rule about using when configuring a value in a step? Sometimes I see words in the DSG with around them and I want to make sure I understand it. It seems to me there are used to configure something that is not a variable or is a reference back tho the UCCS server configuration. Thanks! Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] WB 2 Lab 2 UCCX questions
Hello, 1. I am trying to get music-on-hold to work when the caller is in queue. I am able to make the ringback work. Any suggestions? I looked at the DSG and it does not seem to address the MOH in queue. 2. It also says to play the in queue prompt every 15 seconds, and if the call is in queue over 60 seconds terminate it. I think this means play prompt 4 times and them terminiate call or does it mean play prompt 3 times and terminiate at 4th delay. 3. I do not see where I can download the WB 2 .aef scripts. Can someone help me with this? Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 3945 mgcp voice gateway inbound/outbound call with no voice
I did not see the mgcp bind control and media statements. mgcp bind control source-interface lo0 (for example using loopback0) mgcp bind media source-interface lo0 Have a great day! Thanks, Randall From: darshan ccievoice0...@hotmail.com To: ccie_voice@onlinestudylist.com Sent: Wednesday, September 19, 2012 1:49 PM Subject: [OSL | CCIE_Voice] 3945 mgcp voice gateway inbound/outbound call with no voice Dear Experts; We have replaced the old 3745 Voice gateway with 3945 and this gateway is registered in cucm 7.0 as mgcp gateway. We replace the Box and put the new 3945 in rack and plug out the E1 and Ethernet cable and plugin in 3945. From call manager side we deleted the 3745 and added 3945 and it registered. Call established outbound and inbound and for both calls there is No VOICE in both the ways. Appreciate your help. Attaching sh run sh invent and deb isdn q931 Regards Darsh ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] WAN QoS questions
Hello experts, I have some questions on WAN QoS. 1. If not explicitly not told to TRUST, is it better to use trust or not? 2. If using FRF.12 and told do use compression, does it matter if it is on the WAN DLCI or the policy map? Always in the policy map? 2A If told to use class-based compression then do it on the policy map. 3. SA-SB is 768KB, SA-SC is 1536KB. When applying the 95% of CIR rule do we need to also apply to SC when 1536KB? 3A - What bandwidth threshold would we not use the 95% rule, above 768KB? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] WAN QoS calculations
Hi, I can't remember where I looked before, but where can I find calculations or info for WAN QoS for 10ms, 20ms and 30 ms Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] debug command to see ephone registering in SRST
Hi, What debug command can I use to see ephone's having issues registering to the SRST GW? Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CME Option 150
Hello, If not specified, which interface is it better to configure as the option 150 IP address in the DHCP pool for CME phones? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Phoneview - CME
Hello, I set up phoneview for cme as per the document on proctorlabs. I was able to test and import the 2 phones, but I cannot control either? I see x4001 and 4002 on the banner but I have +442077964001 and 2 respectively. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Voice 5 Lab Handbook
William and everyone, I have the voice BLS and the new 5 lab pack. Froom my expierence, let me just say the new labs are great and are worth the money!!! Every penny. I would recommend to to you and everyone, to buy them. They have many new tasks that are really focused on what you really need to know to pass the lab, Cheers, Randall From: William Bell b...@ucguerrilla.com To: Online Study ccie_voice@onlinestudylist.com Sent: Friday, August 17, 2012 12:30 PM Subject: [OSL | CCIE_Voice] CCIE Voice 5 Lab Handbook Earlier this year I purchased the blended learning solution from ipExpert. This includes some bootcamps, workbook 1 and workbook2 (along with some other items). Right around the same time ipExpert released CCIE Voice 5 Lab Handbook. I was wondering if that handbook is worth the price of entry and what benefits it is actually provided above/beyond Workbook 2? I am looking for consumer feedback. Thanks, Bill -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE - DEAD air
Hello, When I call sc ph2 from another site I am getting dead air once it drops to VM. If I press the messages button from sc ph2 I hear the correct greeting. CUCM -- CUE intergration I see the CTI port on the screen of the calling phone. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] subscribe cucm is not showing up
You should try to start the server from the PL page first. Then open an in-session ticket and they will answer. You sent this to the email list. They don't monitor this DL. Cheers, Randall From: Krishna vinayak_...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Tuesday, August 14, 2012 3:32 PM Subject: [OSL | CCIE_Voice] subscribe cucm is not showing up hi james/doug i don't see cucm subcriber showing up on the switch , and also i cannot reach the ip address of the subscriber as well... CUC7-Pub Fas 1/0/4 144 H none foun eth0 SiteA-RTR Fas 1/0/1 179 R S I 2811 Fas 0/0 UCMPub Fas 1/0/4 130 H none foun eth0 SEP001BD4C6C195 Fas 1/0/2 178 H IP Phone Port 1 UCCX7-PUB. Fas 1/0/4 177 H Win2000 S Eth 2/2 can you please fix this ??? thank you krishna. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database
Hello, Here is the error on the CUPS server from the CUCM Publisher page. Sync Completed, but currently failed to connect to the CUCM Database Monitor. Retrying... 2012-08-12 13:37:17 I reset the AXL username and pw. It connects wit the credentials. It seems like the hostname is not correct. I changed it to UCMPub. I got this from the CUCM server in system/Cisco Unified CM. Also from the CLI, show status, I see the same hostname. Any thoughts? Is this working for other people? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database
Thats what I did and it worked. Thought I reset it when I created it. Cheers, Randall From: Edgar Feliz ejzi...@gmail.com To: Rrcrumm rrcr...@yahoo.com Cc: Jeff S jes20...@gmail.com; Online Study ccie_voice@onlinestudylist.com Sent: Sunday, August 12, 2012 1:33 PM Subject: Re: [OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database Did you reset the trunk? That ussually works for me. On Sun, Aug 12, 2012 at 2:29 PM, Rrcrumm rrcr...@yahoo.com wrote: Yes Sent from my iPhone On Aug 12, 2012, at 11:21 AM, Jeff S jes20...@gmail.com wrote: On CUPS, run the command “show tech network hosts” from the CLI. Does CUPS have the correct hostname for CUCM? --Jeff From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm Sent: Sunday, August 12, 2012 10:10 AM To: Online Study Subject: [OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database Hello, Here is the error on the CUPS server from the CUCM Publisher page. Sync Completed, but currently failed to connect to the CUCM Database Monitor. Retrying... 2012-08-12 13:37:17 I reset the AXL username and pw. It connects wit the credentials. It seems like the hostname is not correct. I changed it to UCMPub. I got this from the CUCM server in system/Cisco Unified CM. Also from the CLI, show status, I see the same hostname. Any thoughts? Is this working for other people? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE - New Labs Lab 2
I set up cue at SC it works from SB and SC , but when I call from SA I get a fast busy after 10 seconds, which is the fwd noan setting. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE - New Labs Lab 2
The difference I can see between the sights is RSVP CAC between SA and SC. The is no CAC between SB and SC. Probably not the issue, but I am not sure while I am scratching my head. Cheers, Randall From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, August 12, 2012 2:18 PM Subject: [OSL | CCIE_Voice] CUE - New Labs Lab 2 I set up cue at SC it works from SB and SC , but when I call from SA I get a fast busy after 10 seconds, which is the fwd noan setting. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE - New Labs Lab 2
Good call. I did add g729r8 in the MTP and not in the transcoder. 5 points! Cheers, Randall From: Bruno Nonogaki brun...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, August 12, 2012 5:13 PM Subject: Re: [OSL | CCIE_Voice] CUE - New Labs Lab 2 If you configured MTP with g729r8, don't forget to add this codec in the XCD, since it is not the default. Or change the MTP to g729ar8. On Sun, Aug 12, 2012 at 6:54 PM, Randall Crumm rrcr...@yahoo.com wrote: The difference I can see between the sights is RSVP CAC between SA and SC. The is no CAC between SB and SC. Probably not the issue, but I am not sure while I am scratching my head. Cheers, Randall From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, August 12, 2012 2:18 PM Subject: [OSL | CCIE_Voice] CUE - New Labs Lab 2 I set up cue at SC it works from SB and SC , but when I call from SA I get a fast busy after 10 seconds, which is the fwd noan setting. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] New Labs - Lab 2
Hello, I am working on lab 2 and the presence server is having an issue which I believe is related to being a VM. The problem I am having is on the SYSTEM\CUCM Publisher menu. The servers sync but failing to conect to the CUCM database. Here is the error: Sync Completed, but currently failed to connect to the CUCM Database Monitor. Retrying... 2012-08-09 19:12:26 Is there some command I need to run on the Presence CLI? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Download a .wav file from CUCM
Hello, How do I download a .wav file (userd for MOH) from CUCM? I am trying to tftp the file down using tftpd32 but it always says file and hostname firleds are required. I did fill out the fields Something is wrong. Any help on tftpd32 or something else? Thanks, Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] HQ switch question
This seems like a dumb question... If the hq rtr has a subinterface with native in it don't we have to have to have a native statement on the switch port with the trunk to hq? for example.. hq interface fa 0/0.101 encapsulation dot1q 101 native ip address 10.10.100.1 255.255.255.0 and the switch. interface fa 1/0/1 description Trunk to HQ RTR switchport mode trunk switchport encapsulation dot1q speed 100 duplex full Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] ANI/DSNI TON on Proctor Labs
Hello, I have noticed some different behaviors and was wondering what you recommend If the question asks for plan unknown and type unknown should you set to 1. plan unknown and type unknown or 2. plan isdn type unknown or 3. plan call manager type call manager For me I have tried the above and it seems like call manager/call manager is what is working(actually allowing the call to go through). It goes through as unknown/unknown Any thoughts? Thanks! Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SRST Access-list for home equipment
Hello, I am working on PL but with my equipment. I want to make the phones here go into SRST. SO I need to add an access-list, my hoe phone being IP address 192.168.12.12 So I added this ip access-list extended sc deny ip host 192.168.12.12 host 10.10.210.11 deny ip host 192.168.12.12 host 10.10.210.10 permit ip any any Then applied it to the interface: interface FastEthernet0/0 description (Outside Public Interface) ip address dhcp ip access-group sc out no ip unreachables ip mtu 1400 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable crypto ipsec client ezvpn Voice-vRack This is not working. Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] PLUS dial issue
Is that a valid number? looks like it is missing a digit and is it a local call since you are stripping the 1 or should the 1 be sent? Cheers, Randall From: donny f f.faraday...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Wednesday, July 4, 2012 11:37 AM Subject: [OSL | CCIE_Voice] PLUS dial issue hi all, I configure RP : \+1.! , pt : pt-plus And have Phone 3001 , CSS_Plus (pt-plus) ti dial MISSED CALL +1909345677 - DNA check show it using the RP \+1.! , but the call failed and got message Your call can't be completed as dialed, please consult your directory Anybody know what missed ? I am using Cisco 7945. d ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 5 new labs lab 1 - cue
looking at it over I think it was i did not include: voice service voip allow-connections h323 to sip etc etc etc Cheers, Randall From: Vik Malhi vma...@ipexpert.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Saturday, June 9, 2012 8:42 PM Subject: Re: [OSL | CCIE_Voice] 5 new labs lab 1 - cue The troubleshooting methodology has to be to eliminate various items involved in the call. Change region between br2 and HQ to g711- does that work? Can you call direct to the cue pilot number from HQ/br1 or is this isolated to call forward? Can you call the cue pilot from br2 phones? Remove any location cac to eliminate an ouf bandwidth flag Does the cue have an mrgl to see the Xcoder at br2? Is the Xcoder in right dpool? Are you using RSVP? Is there above an overlapping codec in the mtp and Xcoder? -- Vik Malhi – CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 On Jun 9, 2012, at 12:04, Randall Crumm rrcr...@yahoo.com wrote: Hi, I am starting up again. I am trying to leave a message for branch 2 user. Branch 2 has CUE. I configured CTI PR, CTI ports,VM pilot,applied VM pilot to br2ph2 line. configured transcoder on br2 gw, registered br2 transcoder to CUCM. applied transcoder to a MRG When I call from br1 I get a fast busy Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] 5 new labs lab 1 - cue
Hi, I am starting up again. I am trying to leave a message for branch 2 user. Branch 2 has CUE. I configured CTI PR, CTI ports,VM pilot,applied VM pilot to br2ph2 line. configured transcoder on br2 gw, registered br2 transcoder to CUCM. applied transcoder to a MRG When I call from br1 I get a fast busy Any thoughts? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Last Chance to Register for IPexpert’s Online Voice “Alchemy” Class….
Hi Wayne, I was in Ken's class tonight and I have to say I think this is awesome ! Way to go. Tonight, the first night, we talked lab strategy and went over hq switch VLAN config and QoS I know from my lab experience, that this would have helped me out.I can't wait for the other 7 classes. I also like that there is bonus material from Ken. One more cool thing, the sessions are recorded, which I like because I know I won't be able to attend one of the sessions live. Bill Lake was online as well and very active on the Q and A. What did you think Bill and anyone else on there tonight? Cheers, Randall From: Wayne Lawson waynelawson-...@ipexpert.com To: OSL ccie_voice@onlinestudylist.com Sent: Wednesday, June 6, 2012 8:28 AM Subject: [OSL | CCIE_Voice] Last Chance to Register for IPexpert’s Online Voice “Alchemy” Class…. CCIE Voice Candidates - I just released a blog, and feel that's it's important for you all to check it out. I don't want this to seem like a sales and marketing pitch (although it somewhat is?, but hopefully you all see the value towards this as it pertains to your CCIE Voice 3.0 prep. I can't give any details, but I would anticipate a new Voice blueprint being announced in the very near future. If you're studying (and hoping to pass 3.0 before 4.0 is introduced) - this post will help with that goal. Last Chance to Register for IPexpert’s Online Voice “Alchemy” Class…. CCIE Voice 3.o Candidates, As most of you are aware – there are leaks that the CCIE Voice lab will be changing soon. Although there hasn’t been an official announcement – I anticipate that this announcement will come soon (possibly within the next week or so). With that being said, if you’re studying for 3.0 – your window of opportunity to pass this blueprint is shrinking! A few weeks ago we announced a new online class entitled “IPexpert’s Online CCIE Voice Alchemy Class“. This course was announced(and offered) due to, what we felt, was a need in the industry.We sought out one of theindustry’s most respected Voice Instructors – Kevin Wallace – and put the course together. As you all know – IPexpert leads the industry in CCIE Voice Lab training – as we have helped certify more CCIE Voice Engineers than any company – worldwide. This course, is highly recommended by me and our team. For such a nominal cost – it’s training that will drastically improve your chances at passing this lab – in that limited window in which the 3.0 lab will be offered. Here are a few facts: Q. When does this course start? A. Thursday, June 7, 2012, 8:00 – 10:30 PM EDT Q. Who should attend this course? A. This course assumes the student has already been through at least one practice lab on their own and that they are at least familiar with the technologies on the CCIE Voice Lab blueprint. Q. What is the basis for the course content? A. This live on-line boot camp walks the student through a new mock lab (that Kevin Wallace created) over a series of eight sessions. Q. What distinguishes this boot camp from a tradition boot camp? A. The biggest difference (huge!) is its focus on lab strategy. There are 12 strategies outlined in what Kevin Wallace calls his “CCIE Voice Alchemy” process, which helps the student “turn their lab day into gold.” This boot camp demonstrates these 12 strategies while working through the new mock lab (in a non-linear fashion). Q. What is the goal of this bootcamp? A. The goal is for the student to complete this boot camp with a much deeper understanding of the technologies on the lab, and (maybe even more importantly) have a set of strategies that they can use on lab day to make the most effective use of their time. Q. Who is this Kevin Wallace guy? A. Kevin Wallace is a CCIE RS and Voice. With Cisco experience dating back to 1989 (on a Cisco AGS+ router running Cisco IOS 7.x), Kevin has been a network design specialist for the Walt Disney World Resort, a Senior Technical Instructor for SkillSoft, and a network manager for Eastern Kentucky University. Kevin holds a bachelor’s of science degree in electrical engineering (focusing on digital communications) from the University of Kentucky, and has also authored or co-authored multiple books for Cisco Press, including: Voice over IP First-Step,Cvoice Foundation Learning Guide, TSHOOT Cert Kit, TSHOOT Official Certification Guide, and ROUTE Cert Kit. Kevin’s website is1ExamAMonth.com. I would also encourage you to review the following 3 videos (below) in which Kevin discusses some very interesting and valuable topics. * 12-Step Strategy Video * Interview w/ a Proctor * Troubleshooting (CCIE Voice) Video Lastly (and what you all want to hear!) – For the few remaining seats, we are offering students an incredible promotion. Class begins June 7th (TOMORROW!), if you cannot attend the live scheduled times you will have access to review the recorded
[OSL | CCIE_Voice] MGCP TS Question
HI, I am working on MGCP TS. What is the best way to capture the output in the putty session or console? Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] BACD issue new labs #2
Hi I am trying to call x4000 and have BACD forward to ephone-hunt list. When i call 4001 it works. When I call 4000 I get a busy signal . Any thoughts are appreciated. application service app-b-acd-aa param voice-mail 4600 paramspace english index 1 param max-time-call-retry 700 param service-name app-b-acd param number-of-hunt-grps 1 param drop-through-option 1 paramspace english language en param handoff-string app-b-acd-aa param max-time-vm-retry 2 paramspace english location flash: param aa-pilot 4000 param second-greeting-time 60 param welcome-prompt _bacd_welcome.au param call-retry-timer 15 ! service app-b-acd param queue-len 15 param aa-hunt1 4123 param queue-manager-debugs 1 param number-of-hunt-grps 1 dial-peer voice 222 voip service aa destination-pattern 4000 session target ipv4:10.10.110.3 incoming called-number 4000 dtmf-relay h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! ! ! telephony-service srst mode auto-provision all em logout 0:0 0:0 0:0 max-ephones 8 max-dn 8 ip source-address 10.10.202.1 port 2000 time-zone 21 time-format 24 max-conferences 8 gain -6 moh music-on-hold.au transfer-system full-consult create cnf-files version-stamp 7960 Feb 19 2012 22:18:09 ! ! ephone-dn 1 number 4001 label 4001 description +442077964001 name +442077964001 ! ! ephone 1 mac-address 0024.142E.76A9 button 1:1 ! ! ephone-hunt 1 longest-idle pilot 4123 list 4001 ! ! SiteC-RTR#show ephone reg ephone-1[0] Mac:0024.142E.76A9 TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 17/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9 IP:10.10.202.122 13500 7962 keepalive 64 max_line 6 button 1: dn 1 number 4001 CM Fallback CH1 IDLE Preferred Codec: g711ulaw Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] BACD issue new labs #2
Thank you Brian and Baktha That was it. I appreciate it gentlemen Cheers, Randall From: Brian Valentine bkvalent...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 10:48 AM Subject: Re: [OSL | CCIE_Voice] BACD issue new labs #2 In dial-peer 222, you are calling up service aa. You don't have a service called aa. You named your service app-b-acd-aa. HTH On Sun, Feb 19, 2012 at 12:59 PM, Randall Crumm rrcr...@yahoo.com wrote: Hi I am trying to call x4000 and have BACD forward to ephone-hunt list. When i call 4001 it works. When I call 4000 I get a busy signal . Any thoughts are appreciated. application service app-b-acd-aa param voice-mail 4600 paramspace english index 1 param max-time-call-retry 700 param service-name app-b-acd param number-of-hunt-grps 1 param drop-through-option 1 paramspace english language en param handoff-string app-b-acd-aa param max-time-vm-retry 2 paramspace english location flash: param aa-pilot 4000 param second-greeting-time 60 param welcome-prompt _bacd_welcome.au param call-retry-timer 15 ! service app-b-acd param queue-len 15 param aa-hunt1 4123 param queue-manager-debugs 1 param number-of-hunt-grps 1 dial-peer voice 222 voip service aa destination-pattern 4000 session target ipv4:10.10.110.3 incoming called-number 4000 dtmf-relay h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! ! ! telephony-service srst mode auto-provision all em logout 0:0 0:0 0:0 max-ephones 8 max-dn 8 ip source-address 10.10.202.1 port 2000 time-zone 21 time-format 24 max-conferences 8 gain -6 moh music-on-hold.au transfer-system full-consult create cnf-files version-stamp 7960 Feb 19 2012 22:18:09 ! ! ephone-dn 1 number 4001 label 4001 description +442077964001 name +442077964001 ! ! ephone 1 mac-address 0024.142E.76A9 button 1:1 ! ! ephone-hunt 1 longest-idle pilot 4123 list 4001 ! ! SiteC-RTR#show ephone reg ephone-1[0] Mac:0024.142E.76A9 TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 17/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9 IP:10.10.202.122 13500 7962 keepalive 64 max_line 6 button 1: dn 1 number 4001 CM Fallback CH1 IDLE Preferred Codec: g711ulaw Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] New lab #2 - 3750 Qos
HI, I have a question on Qos 1. The question wants COS 3 i n the 2nd egress queue, 3rd threshold and COS 5 in the 1st egress queue 3rd threshold. This is done after running auto qos on the phone switchport. No question 2. COS 5 traffic sent to SA-GW(queue set 2) should be dropped if queue is 75% full. Can someone please explain the answer to me. The DSG is not clear to me. Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New lab #2 - 3750 Qos
Looking at this closer. OB queueQueue 2T1T2T3 MAX mls qos queue-set output 2 threshold 759090 100 mls qos srr-queue output cos-map queue 1 threshold 3 (I thing the last part of this may be wrong, should be a 1) So looking at the DSG, (see above) what is confusing, is if COS 5 is already in T3, from the auto qos, why move it to T1. I would say keeping it in T3 is easier (see below). OB queueQueue 2T1T2T3 MAX mls qos queue-set output 2 threshold 506075 100 Any thoughts experts? Cheers, Randall From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 11:15 AM Subject: New lab #2 - 3750 Qos HI, I have a question on Qos 1. The question wants COS 3 i n the 2nd egress queue, 3rd threshold and COS 5 in the 1st egress queue 3rd threshold. This is done after running auto qos on the phone switchport. No question 2. COS 5 traffic sent to SA-GW(queue set 2) should be dropped if queue is 75% full. Can someone please explain the answer to me. The DSG is not clear to me. Thanks, Cheers, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New lab #2 - 3750 Qos
Thanks George, I was tired and put 90 90. My mistake. The DSG does have 75 100 100 100 Thanks for your answer sir.It is helpful. This statement is inccorect n the DSG: mls qos srr-queue output cos-map queue 1 threshold 3. It should be T1 That's why it was somewhat confusing. Cheers, Randall From: George Goglidze gogli...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 1:39 PM Subject: Re: [OSL | CCIE_Voice] New lab #2 - 3750 Qos I don't know where you got the table that you are referencing below... But you can never set threshold 3, it's 100 percent always: mls qos queue-set output X threshold X T1 T2 R M T1 and T2 are self explanatory. Then it's R for Reserved and M for Maximum. So to answer your question, yes you still need to move the needed CoS to T1 or T2, and assign 75 percent to it. Hope this helps, Sent from my iPad On 19 Feb 2012, at 20:47, Randall Crumm rrcr...@yahoo.com wrote: Looking at this closer. OB queueQueue 2T1T2T3 MAX mls qos queue-set output 2 threshold 759090 100 mls qos srr-queue output cos-map queue 1 threshold 3 (I thing the last part of this may be wrong, should be a 1) So looking at the DSG, (see above) what is confusing, is if COS 5 is already in T3, from the auto qos, why move it to T1. I would say keeping it in T3 is easier (see below). OB queueQueue 2T1T2T3 MAX mls qos queue-set output 2 threshold 506075 100 Any thoughts experts? Cheers, Randall From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 11:15 AM Subject: New lab #2 - 3750 Qos HI, I have a question on Qos 1. The question wants COS 3 i n the 2nd egress queue, 3rd threshold and COS 5 in the 1st egress queue 3rd threshold. This is done after running auto qos on the phone switchport. No question 2. COS 5 traffic sent to SA-GW(queue set 2) should be dropped if queue is 75% full. Can someone please explain the answer to me. The DSG is not clear to me. Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 72, Issue 115
Thank you sir. I appreciate it Cheers, Randall From: Baktha Muralidharan muralic...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 1:13 PM Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 72, Issue 115 Hi Randall 1. I think the solutions guide recommends that you run auto qos on an unused interface, just to be safe. 2. As you know, the 75% refers to the value of the [drop] threshold. Since cos 5 is associated with 3rd threshold, as such, you would configure threshold 3 to be 75%. However, the recommended approach is to move the cos 5 to threshold 1 and then configure threshold 1 to be 75%. The theory behind this is somewhat complex (Vik explains this in detail in the bootcamp). It goes something like this- Threshold 3 is kind of the percentage of buffer contributed by this queue to the overall buffer space and threshold 4 specifies the 3rd threshold for the queue in question. thanks, /Baktha -- Message: 2 Date: Sun, 19 Feb 2012 11:15:30 -0800 (PST) From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] New lab #2 - 3750 Qos Message-ID: 1329678930.97124.yahoomail...@web164603.mail.gq1.yahoo.com Content-Type: text/plain; charset=iso-8859-1 HI, I have a question on Qos 1. The question wants COS 3 i n the 2nd egress queue, 3rd threshold and COS 5 in the 1st egress queue?3rd threshold. This is done after running auto qos on the phone switchport. No question 2. COS 5 ?traffic sent to SA-GW(queue set 2) should be dropped if queue is 75% full.? Can someone please explain the answer to me. The DSG is not clear to me. Thanks, ? Cheers, Randall -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120219/b4f03b16/attachment-0001.html -- Hi Emanuel, - does the call drop even if you select an internal (on-net) extension? - assume you have configured the CSS on the RDP? thanks, /Baktha Message: 3 Date: Sun, 19 Feb 2012 17:17:17 -0200 From: Emanuel Damasceno aedamasc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MVA - Phone hangs up when trying to make a call. Message-ID: cabkckuxrykqab0+xuohzpcygzpywpnzzf2q5oyg1ksrhame...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hey guys, I've configured everything (I suppose...) RDP, RD, MVA on SP... Everything seems to be in order. It welcomes me, asks to dial a password, yadda yadda, when I ask to make a call by pressing 1, I dial the numbers and when I press # the connection drops. Here is my config: HQ-RTR application service mva http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml ! dial-peer voice 5999 pots service mva incoming called-number 5999 ! dial-peer voice 5000 voip destination-pattern 5... voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.11 no vad dial-peer voice 5001 voip preference 1 destination-pattern 5... voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.10 no vad The remote Profile and Remote Destination Profile are correct, otherwise it wouldn't ask me to put the PIN straight up. It would ask me first for my number then PIN. Any ideas? *Emanuel Damasceno* CCNP Voice -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120219/2d098ccc/attachment-0001.html -- Message: 4 Date: Sun, 19 Feb 2012 11:16:44 -0800 (PST) From: Randall Crumm rrcr...@yahoo.com To: romain mullier romain.mull...@gmail.com Cc: Online Study ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] BACD issue new labs #2 Message-ID: 1329679004.50928.yahoomail...@web164601.mail.gq1.yahoo.com Content-Type: text/plain; charset=iso-8859-1 lol You mean load up some more. I have to wake up at 5AM since I am on the west coast. ? Cheers, Randall From: romain mullier romain.mull...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 19, 2012 11:09 AM Subject: Re: [OSL | CCIE_Voice] BACD issue new labs #2 Randall, You defined the name of your sevice as app-b-acd-aa yet your dial-peer is invoking service aa which does not exist. Time to take a coffee break ;-) Romain On Sun, Feb 19, 2012 at 12:59 PM, Randall Crumm rrcr...@yahoo.com wrote: Hi I am trying to call x4000 and have BACD forward to ephone-hunt list. When i call 4001 it works. When I call 4000 I get a busy signal . Any thoughts are appreciated. application ?service app-b-acd-aa ? param voice-mail 4600 ? paramspace english index 1 ? param max-time-call-retry 700 ? param service-name app-b-acd ? param number-of-hunt-grps 1 ? param drop-through-option 1 ? paramspace english language en ? param handoff
[OSL | CCIE_Voice] UCCX Script editor problem
HI, I want to use a script editor local to my machine not the one on the UCCX box. I am able to log into the web page for the uccs sever at 10.10.210.5. Shouldn't I be able to download the editor from the UCCX server, 10.10.210.5 and log in with the same credentials I used as in logging in to the UXXC web page I can't. I get to 81% and it closes. Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX Scripts WB 2 Lab 7
HI, I recorded a closed prompt. I am able to find it and save it anywhere. My issues is in my script I have a play prompt step and when I use reactive debug it the prompt is not playing. I getting the error I'm sorry we are experiencing system issues... My question is does it matter where I save the newly recorded wave file and should the attribute be set to parameter to set it in the application management page? Other than that my script looks good to me. thanks for the help Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] New 5 Labs: Lab 2 UXXC
HI, I know the steps I need to do but I am unsure of the prompts I need to record. Please let know what I need to record. I believe I need to record: 1. The number of people ahead of you is 2. zero 3. one Please let me know Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Bootcamp Lab 1 UCCX solution
Hi, Does anyone have a solution for the UCCX script portion? I do not see it in the download and it is not in the DSG. Thanks Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] lab---...6 required
Did you actually read the thread? One guys says he bought the lab, but can't crack it. First, where do you buy one lab? second, if you bought it why would you need to crack it This is BS Cheers, Randall From: Wong Misk wongm...@yahoo.com To: Methew Ch methe...@yahoo.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, February 5, 2012 3:06 AM Subject: Re: [OSL | CCIE_Voice] lab---...6 required Hi, I have got lab 6 in HK and there is lot of changes in it comparing to lab 5, 6 is more hard and it will take more time to clear. It was my 2nd attempt first i got 5 and now 6 i m really depress as also my friends got 6 last week. Now people should be ready for 6 best of luck Regards From: Methew Ch methe...@yahoo.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, February 5, 2012 1:35 PM Subject: [OSL | CCIE_Voice] lab---...6 required Hi, I am looking for the partner for purchase If anyone interested please email me the same. I just found the link if anyone is interested we can share the cost. h t t p:// w w w . c e r t k n o w l e d g e .com/f o r u m/index.php?/topic/24-gb-ccievoicelabscom-real-labs/ Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com 5 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX scripts
Thanks LOL Of course I wasn't just thinking about a share. I was thinking TFTP to CUCM, download... Cheers, Randall From: Ken Wyan kew...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 5, 2012 8:29 AM Subject: Re: [OSL | CCIE_Voice] UCCX scripts That's illegal. share one directory of your computer copy from UCCX server to shared directory. On Sun, Feb 5, 2012 at 9:21 PM, Randall Crumm rrcr...@yahoo.com wrote: HI, How can I copy the icd script to my computer from the proctor labs pod? Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX scripts
HI, What I want to do is be able to open and modify scripts while not connected to PL pods| I was able to copy the default scripts to my computer, which is what I wanted. Now, I download/install the ccx editor to my computer, when I go to run it, the app open then closes real quick. Thanks for the help gents Cheers, Randall From: Edgar Feliz ejzi...@gmail.com To: Ken Wyan kew...@gmail.com Cc: Randall Crumm rrcr...@yahoo.com; Online Study ccie_voice@onlinestudylist.com Sent: Sunday, February 5, 2012 8:55 AM Subject: Re: [OSL | CCIE_Voice] UCCX scripts OOPs!! Sorry Randall I gave you option to copy Vic's scripts to the RDP/CCX. Not sure if it works the other way around, but there aren't any script kept on the server because they rebuilt every session. Edgar On Sun, Feb 5, 2012 at 11:29 AM, Ken Wyan kew...@gmail.com wrote: That's illegal. share one directory of your computer copy from UCCX server to shared directory. On Sun, Feb 5, 2012 at 9:21 PM, Randall Crumm rrcr...@yahoo.com wrote: HI, How can I copy the icd script to my computer from the proctor labs pod? Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX scripts Question - 5 New Labs Lab 2
Hi, In the scripts solution it has a decrement step. Can someone explain why this is needed, if it is? Thanks, Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Fw: Solutions for UCCX scripts - .aef files
Cheers, Randall - Forwarded Message - From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Sunday, January 29, 2012 11:10 AM Subject: [OSL | CCIE_Voice] Solutions for UCCX scripts - .aef files HI, Does anyone know a way to view the solution scripts provided if you are not connected to a POD or home lab? I am looking for a viewer Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Solutions for UCCX scripts - .aef files
HI, Does anyone know a way to view the solution scripts provided if you are not connected to a POD or home lab? I am looking for a viewer Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Fwd: general doubt 2 sessions straight
You need to have support link your sessions, otherwise you will be disconnected. Cheers, Randall From: Jeferson Guardia jefers...@gmail.com To: OSL Voice ccie_voice@onlinestudylist.com Sent: Saturday, January 28, 2012 5:29 PM Subject: [OSL | CCIE_Voice] Fwd: general doubt 2 sessions straight Does anyone know anything about this? thx -- Forwarded message -- From: Jeferson Guardia jefers...@gmail.com Date: 2012/1/28 Subject: general doubt 2 sessions straight To: support supp...@ipexpert.com Hi, is the first time I booked 2 sessions straight, is it possible I will continue on the same rack or there is a chance I will be kicked out and given a new pod, have to start my lab all over again from another pod? Let me know, thanks -- Jeferson Guardia CCIE #28157 -- Jeferson Guardia CCIE #28157 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX prompt recording
HI, How are people recording custom prompts? Thanks Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX prompt recording
Thanks Is there already a script to record created or do we need to create it? How do you record in UC? Cheers, Randall From: Jamil Ahmed jamil.ahmedc...@yahoo.com To: Randall Crumm rrcr...@yahoo.com; Online Study ccie_voice@onlinestudylist.com Sent: Sunday, January 22, 2012 11:52 AM Subject: Re: [OSL | CCIE_Voice] UCCX prompt recording Either from ipcc recording script or from UC in real lab open the UC from ipccx server otherwise u will face java issue thanks From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Monday, January 23, 2012 1:07 AM Subject: [OSL | CCIE_Voice] UCCX prompt recording HI, How are people recording custom prompts? Thanks Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 5-lab Workbook #4 - Unity Connection Notification
HI, You need to add a css on the voicemail ports that will see the SA local route plan. earlier in the lab you created a RL with sb as a backup so it should work as asked without anything else. Cheers, Randall From: Jurassic Labs jurassicl...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Sunday, January 22, 2012 7:14 PM Subject: [OSL | CCIE_Voice] 5-lab Workbook #4 - Unity Connection Notification ! ALL BE ADVISED The new 5-lab handbooks are somewhat in beta mode I believe as I've ran into some minor errors and such. But the biggest issue is that I'm finding the solution guide for Lab#5 is not available (the estimated timeline for it to published has passed) and I'm finding out in Lab#4 there a section completly skipped in the solution guide. If anyone has some thoughts about making this work - please post. Ensure that everytime somebody leaves user [fill in name] a new voicemail in his account that a message notification call is made out to PSTN line 2. The call should be sent out of the SiteA gateway as a local call, with the SiteB gateway acting as a backup. If the call goes out the SiteB gateway, it should be a long distance call. Ensure that Unity Connection cannot place a call outbound to any other number except PSTN line 2 (+12024678124). Setting up a subscriber's notification device is the easy part - getting Unity Connection to dial out that number to CUCM - where / how is that controlled? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Type and Plan on H323
You can use translations rules or isdn maps on the voice interface Cheers, Randall From: datucha123 datucha123 datucha...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Saturday, January 21, 2012 12:09 PM Subject: [OSL | CCIE_Voice] Type and Plan on H323 Hello, H323 Router by default (in IOS) sets the Calling Type and Plan for outgoing calls to PRI. - I think there is something put in IOS so that it recognizes the US dialplan, and set the Type and Plan automatically. How can I disable it? Because when I set the Type and Plan in Callmanager, and send the call to h323 gateway, if the Calling Number matches the US dialplan, then the H323 gateway overwrites the Type and Plan. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] BACD - question
HI, I have configured BACD on my sc-rtr. It does work but, I do not know how to control the greetings. When I dial 02077353000 i get Thank you for calling. This is excpected. Then I am getting for sales press 1 for Customer Service press 2 to dial by extension press 3 for operator press 0 Here is my config: application service queue flash:/bacdprompts/app-b-acd-2.1.2.2.tcl param number-of-hunt-grps 2 param aa-hunt2 3002 param aa-hunt3 5010 param queue-len 15 param queue-manager-debugs 1 ! service aa flash:/bacdprompts/app-b-acd-aa-2.1.2.2.tcl paramspace english index 1 paramspace english language en paramspace english location flash:/bacdprompts/ param service-name queue param handoff-string aa param aa-pilot 3000 param welcome-prompt _bacd_welcome.au param number-of-hunt-grps 2 param dial-by-extension-option 1 param second-greeting-time 60 param call-retry-timer 15 param max-time-call-retry 700 param max-time-vm-retry 2 param voice-mail 3600 ! dial-peer voice 222 voip service aa destination-pattern 3000 session target ipv4:10.10.110.3 incoming called-number 3000 dtmf-relay h245-alphanumeric codec g711ulaw no vad Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] BACD - question
Maybe another way to ask is it looks like it is hitting the _bacd_options_menu.au which is already recorded. So I guess we would have to have the cli config to make the options menu if asked? Any thoughts? Randall From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Monday, January 9, 2012 1:13 PM Subject: [OSL | CCIE_Voice] BACD - question HI, I have configured BACD on my sc-rtr. It does work but, I do not know how to control the greetings. When I dial 02077353000 i get Thank you for calling. This is excpected. Then I am getting for sales press 1 for Customer Service press 2 to dial by extension press 3 for operator press 0 Here is my config: application service queue flash:/bacdprompts/app-b-acd-2.1.2.2.tcl param number-of-hunt-grps 2 param aa-hunt2 3002 param aa-hunt3 5010 param queue-len 15 param queue-manager-debugs 1 ! service aa flash:/bacdprompts/app-b-acd-aa-2.1.2.2.tcl paramspace english index 1 paramspace english language en paramspace english location flash:/bacdprompts/ param service-name queue param handoff-string aa param aa-pilot 3000 param welcome-prompt _bacd_welcome.au param number-of-hunt-grps 2 param dial-by-extension-option 1 param second-greeting-time 60 param call-retry-timer 15 param max-time-call-retry 700 param max-time-vm-retry 2 param voice-mail 3600 ! dial-peer voice 222 voip service aa destination-pattern 3000 session target ipv4:10.10.110.3 incoming called-number 3000 dtmf-relay h245-alphanumeric codec g711ulaw no vad Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE - INIT not online
HI My CUE is sayiong INIT instead of online after activating the voiceview service. Besides reload is there other commands to bring it online? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE MWI issue
Hi, I have CUE with CME. I have configured MWi for subscribe notify. According to the DSG my config looks correct. When I do debug ccsip messages I see: Messages-Waiting: yes Message-Account: sip:4002@10.10.115.2 But the MWI on the phone is not working. Any thoughts I have done the following checked transcoder is registered ephone-dn 2 no mwi sip mwi sip sup-ua no mwi-server ipv4:10.10.115.2 mwi-server ipv4:10.10.115.2 reset ephone 2 thanks, Rndall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE Viewmail issue
HI, I am having an issue with voiceview and CUE w/ CME. My phone is not learning the service URL's? I have reset it, but don't know what else I can do. Any thoughts? thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE MWI issue
This is working now. I am not sure but some 30-40 minutes later it is working rc From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Saturday, January 7, 2012 1:02 PM Subject: [OSL | CCIE_Voice] CUE MWI issue Hi, I have CUE with CME. I have configured MWi for subscribe notify. According to the DSG my config looks correct. When I do debug ccsip messages I see: Messages-Waiting: yes Message-Account: sip:4002@10.10.115.2 But the MWI on the phone is not working. Any thoughts I have done the following checked transcoder is registered ephone-dn 2 no mwi sip mwi sip sup-ua no mwi-server ipv4:10.10.115.2 mwi-server ipv4:10.10.115.2 reset ephone 2 thanks, Rndall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Five-Lab Self Study
Last I heard was soon. The labs are very challenging and offer alot more from volume 2. They are well worth the money. Randall From: Jurassic Labs jurassicl...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Saturday, January 7, 2012 5:22 PM Subject: [OSL | CCIE_Voice] Five-Lab Self Study I've purchased the new Five-Lab package which for sure has some good information in it. However there are only 3 detailed solution guides...where's the other two and when does IPX expect to have those completed? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] New Lab #2 - CUE ntp
HI, I am working on the new lab #2. When configuring CUE the question asks for the primary NTP server to be 10.10.110.3. The default is lo1, 10.10.115.1 When I enter that IP address, I get an error : I could not reach 10.10.110.3 using NTP. If 10.10.110.3 really is an NTP server, then there may be a firewall blocking NTP packets. NTP uses UDP port 123. Any thoughts? Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New Lab #2 - CUE ntp
HI All, Thanks for the replies. I do need NTP master 9 since the question is requiring the local clock as backup. I was able to ping the lo0 interface for sa-rtr so my commands I put in are: ntp master 9 ntp server 10.10.110.1 Here is my question. If i did not configure ntp server 10.10.110.3 (as above), then should I be manually put it in the CUE wizard config? Thanks, Randall From: Bill Lake whl...@gmail.com To: Matthew Saskin m...@saskin.net Cc: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, January 4, 2012 4:10 PM Subject: Re: [OSL | CCIE_Voice] New Lab #2 - CUE ntp You do not need the ntp master command and it can actually cause the ntp to not work remove the ntp master command (by default your router automatically answers ntp request out every interface once you do the ntp server ip command verify that your BR2 router is synced with ntp server at 10.10.110.1 and if not set the times as close to the same as you can and that helps speed up sync once sync is complete, make sure you can ping both addresses, sometimes things are shut down such as is service-engine shut down? verify this with show ip int br once you can ping the cue ip and have ntp sync complete, you should not get this error On Wed, Jan 4, 2012 at 3:41 PM, Matthew Saskin m...@saskin.net wrote: Also, make sure that 10.10.110.3 is indeed acting as an NTP server. If it's a router, ntp master and ntp source to the interface that has the IP 10.10.110.3, etc. I know that I typically forget to put the static route back to the CUE module since you can get session/console access with the service-module ip/default gateway set, but no external traffic without the static route. -matthew On Wed, Jan 4, 2012 at 3:14 PM, datucha123 datucha123 datucha...@gmail.com wrote: ping 10.10.110.3 - and see if it pings. then take a look at the Integrated Service Engine Interface, to see the default gateway set. On Thu, Jan 5, 2012 at 12:03 AM, Rrcrumm rrcr...@yahoo.com wrote: What commands? Sent from my iPhone On Jan 4, 2012, at 11:53 AM, datucha123 datucha123 datucha...@gmail.com wrote: Verify that CUE can reach the NTP IP Address. and the CUE module has the default gateway set On Wed, Jan 4, 2012 at 11:27 PM, Randall Crumm rrcr...@yahoo.com wrote: HI, I am working on the new lab #2. When configuring CUE the question asks for the primary NTP server to be 10.10.110.3. The default is lo1, 10.10.115.1 When I enter that IP address, I get an error : I could not reach 10.10.110.3 using NTP. If 10.10.110.3 really is an NTP server, then there may be a firewall blocking NTP packets. NTP uses UDP port 123. Any thoughts? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] please link sessions tomorrow
Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] please link sessions tomorrow
Sorry meant to sent to support From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, January 4, 2012 9:09 PM Subject: please link sessions tomorrow Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Presence
HI, I am using a HW solution with PL pods. I cannot register my CUPC to CUCM. Has anyone else had this problem? Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE wizard authentication issue
HI, I have getting an authentication error when starting the CUE wizard, Login to Call Manager Express as Administrator failed. Check you Call Manager Express configuration I am using the username and password from the statement web admin system name admin password cisco not the CUE admin username and password. Here is my config: telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 1 sc-xcoder no auto-reg-ephone max-ephones 8 max-dn 8 ip source-address 10.10.202.1 port 2000 voicemail 3600 max-conferences 8 gain -6 web admin system name admin password cisco dn-webedit transfer-system full-consult transfer-pattern .T after-hours block pattern 1 900 create cnf-files version-stamp 7960 Dec 30 2011 23:16:44 ip http server ip http authentication local no ip http secure-server ip http path flash:/GUI Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE wizard authentication issue
That did not work From: linuxboss.9 linuxbos...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Friday, December 30, 2011 3:33 PM Subject: Re: [OSL | CCIE_Voice] CUE wizard authentication issue Try removing ip http authentication local On Fri, Dec 30, 2011 at 3:23 PM, Randall Crumm rrcr...@yahoo.com wrote: HI, I have getting an authentication error when starting the CUE wizard, Login to Call Manager Express as Administrator failed. Check you Call Manager Express configuration I am using the username and password from the statement web admin system name admin password cisco not the CUE admin username and password. Here is my config: telephony-service sdspfarm units 1 sdspfarm transcode sessions 4 sdspfarm tag 1 sc-xcoder no auto-reg-ephone max-ephones 8 max-dn 8 ip source-address 10.10.202.1 port 2000 voicemail 3600 max-conferences 8 gain -6 web admin system name admin password cisco dn-webedit transfer-system full-consult transfer-pattern .T after-hours block pattern 1 900 create cnf-files version-stamp 7960 Dec 30 2011 23:16:44 ip http server ip http authentication local no ip http secure-server ip http path flash:/GUI Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Telephony-Service vs call-manager-fallback
Hi, I understand if you need to preserve features you need to configure telephony-service. Also if you need learned DN's. If not, call-manager-fallback works. Can some people list some features that would require telephony-service? Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Presence soft phone
Sorry TFTP is failing From: Rrcrumm rrcr...@yahoo.com To: Ccie ccie_voice@onlinestudylist.com Sent: Tuesday, December 27, 2011 11:32 AM Subject: [OSL | CCIE_Voice] Presence soft phone Hi I am having issues getting the CUPC soft client working. I have a hw solution to PL. I am working on wb2 lab 4 and cannot get the cupc to operate in soft phone mode. Looking at the health it says td to failed. I triple. Heckled this and it is configured correctly Any thoughts? Thanks Randall Sent from my iPhone ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] 3750 Qos Question
Hi, Can someone explain the command, mls qos srr-queue input bandwidth 4 4: a little and an example of having one queue with twice as much bandwidth as the oterh queue (or something like that). Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE misbehaving
HI, I have an issue with my CUE. I have the configuration on the SC rtr (see below). When I enter ser ser 0/0 ses I just get blank ... I hit ctl+alt+6 x and get back to the sc rtr cli If I hit enter again I get : SiteC-RTR# [Resuming connection 1 to 10.10.115.1 ... ] This is blank space... interface Loopback1 ip address 10.10.115.1 255.255.255.0 ip ospf network point-to-point ! interface Service-Engine0/0 ip unnumbered Loopback1 service-module ip address 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 ip route 10.10.115.2 255.255.255.255 Service-Engine0/0 Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Is Proctorlabs down right now?
___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 5 New labs what to watch for!!!
Thanks Edgar we all appreciate it. randall From: Edgar Feliz ejzi...@gmail.com To: ccie_voice@onlinestudylist.com; Larry Stern larry.st...@blackbox.com Sent: Sunday, November 27, 2011 9:12 AM Subject: [OSL | CCIE_Voice] 5 New labs what to watch for!!! Guys I have been working on the new (5) labs mostly 1-3 since they have the guide. Here is what i have found to be things to watch for and fixes, Please note i have been working on these for over 10 days and it's the same every time it is just the way the integration was done for the VM images purposely or not. 1. There are some typos you will see reference to 011916745738931 but if you try to call that number it is not available true number is 011916745738931 2. There are some others name of routers in guide not always right when you look for solutions so just make sure you note what router you are working on. I think this is mainly because of copy and pasting from one lab to another etc since some things are similar but devices are different. 3. UCCX integration; 1. rmjtapi app-user is not configured add rmjtapi add phones and cti enable 2. make sure pwds match on CCX and CUCM for jtapi_1 and rmjtapi 3. from CCX run sync and restart engine 4. You may have to re-sync a couple of times 1. the T flag is not set so the CUCM never sees that the CCX is integrated you have to do a manual step to get this up and running so you can add the UCCX extension to users, 1. run this command on the CUCM Pub as stated in earleir emails run sql update processconfig set paramvalue=T where paramname like '%nstalled%' 2. NO need to reload it takes affect right away 1. CUC - I have had to reload the CUC server every time for MWIs and to be able to leave message... This one I am not sure why I have no fix other than to restart the server. 2. CUE - As noted in labs WB and Guide you will need to change licenses depending on the lab you are working on. 3. Lab 2 CCXquestion there is a step missing in the script. a generated prompt of zero calls ahead of you when you are the only one in queue = you do need the decrement step (thanks larry) If i recall or run into any more items of interest i will post back i am in last 5 days of prep and will be concentrating on the labs E ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] How do look at this file in CUCM CLI
HI, How do I look at this? admin:utils dbreplication sta admin:utils dbreplication status This command reads and writes database information from all machines and will take quite some time...please be patient. utils dbreplication status Output is in file cm/trace/dbl/sdi/ReplicationStatus.2011_11_26_23_12_59.out Please use file view activelog cm/trace/dbl/sdi/ReplicationStatus.2011_11_26_23_12_59.out command to see the output admin: thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUCM/UCCX Intergration
HI, I am working on the New Lab 1 UCCX portion. I am suppose to add an UCCX extension to each user page, but the field to add the UCCX exntension is not there. I also did not see a rmjtapi user in CUCM. This is the user in the intergration page on UCCX. Any thoughts? Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] lab - 6
Thanks Mark! The real question is why is a question like this in the CCIE Voice lab in the first place. Randall From: Mark Reed marklr...@gmail.com To: Peter Jeff peterjeff2...@yahoo.com Cc: Ken Wyan kew...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Tuesday, November 22, 2011 3:22 AM Subject: Re: [OSL | CCIE_Voice] lab - 6 The answer is in this document. http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976 I tried it last night in my lab. Here is my config using the static instructions in that doc. ip dhcp pool SCDHCP origin file flash:SCDHCP option 150 ip 142.100.64.12 142.100.64.11 default-router 142.102.66.254 BR2-RTR# more flash:SCDHCP *time* Nov 21 2011 07:52 AM *version* 2 !IP address Type Hardware address Lease expiration 142.102.66.21 /24 id 0100.1B54.951C.D9 Infinite 142.102.66.22 /24 id 0100.1AA1.93E0.F5 Infinite *end* BR2-RTR#sh cdp nei det Device ID: SEP001B54951CD9 Entry address(es): IP address: 142.102.66.21 ... Device ID: SEP001AA193E0F5 Entry address(es): IP address: 142.102.66.22 I created the SCDHCP doc in notepad. Uploaded it to CUCM, then TFTPed it to my router. Once the file is in flash the since dhcp pool looks up the static IPs in the file then assigns it to the appropriate phone. On Mon, Nov 21, 2011 at 2:14 PM, Peter Jeff peterjeff2...@yahoo.com wrote: The real question is why is a question like this in the CCIE From: Mark Reed marklr...@gmail.comTo: Peter Jeff peterjeff2...@yahoo.com Cc: Ken Wyan kew...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Tuesday, November 22, 2011 3:22 AM Subject: Re: [OSL | CCIE_Voice] lab - 6 The answer is in this document. http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976 I tried it last night in my lab. Here is my config using the static instructions in that doc. ip dhcp pool SCDHCP origin file flash:SCDHCP option 150 ip 142.100.64.12 142.100.64.11 default-router 142.102.66.254 BR2-RTR# more flash:SCDHCP *time* Nov 21 2011 07:52 AM *version* 2 !IP address Type Hardware address Lease expiration 142.102.66.21 /24 id 0100.1B54.951C.D9 Infinite 142.102.66.22 /24 id 0100.1AA1.93E0.F5 Infinite *end* BR2-RTR#sh cdp nei det Device ID: SEP001B54951CD9 Entry address(es): IP address: 142.102.66.21 ... Device ID: SEP001AA193E0F5 Entry address(es): IP address: 142.102.66.22 I created the SCDHCP doc in notepad. Uploaded it to CUCM, then TFTPed it to my router. Once the file is in flash the since dhcp pool looks up the static IPs in the file then assigns it to the appropriate phone. On Mon, Nov 21, 2011 at 2:14 PM, Peter Jeff peterjeff2...@yahoo.com wrote:oice lab exam in the first place. Randall From: Peter Jeff peterjeff2...@yahoo.com To: Mark Reed marklr...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Ken Wyan kew...@gmail.com Sent: Monday, November 21, 2011 2:22 PM Subject: Re: [OSL | CCIE_Voice] lab - 6 thanks marks easy one From: Mark Reed marklr...@gmail.com To: Peter Jeff peterjeff2...@yahoo.com Cc: Ken Wyan kew...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Tuesday, November 22, 2011 3:22 AM Subject: Re: [OSL | CCIE_Voice] lab - 6 The answer is in this document. http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976 I tried it last night in my lab. Here is my config using the static instructions in that doc. ip dhcp pool SCDHCP origin file flash:SCDHCP option 150 ip 142.100.64.12 142.100.64.11 default-router 142.102.66.254 BR2-RTR# more flash:SCDHCP *time* Nov 21 2011 07:52 AM *version* 2 !IP address Type Hardware address Lease expiration 142.102.66.21 /24 id 0100.1B54.951C.D9 Infinite 142.102.66.22 /24 id 0100.1AA1.93E0.F5 Infinite *end* BR2-RTR#sh cdp nei det Device ID: SEP001B54951CD9 Entry address(es): IP address: 142.102.66.21 ... Device ID: SEP001AA193E0F5 Entry address(es): IP address: 142.102.66.22 I created the SCDHCP doc in notepad. Uploaded it to CUCM, then TFTPed it to my router. Once the file is in flash the since dhcp pool looks up the static IPs in the file then assigns it to the appropriate phone. On Mon, Nov 21, 2011 at 2:14 PM, Peter Jeff peterjeff2...@yahoo.com wrote: Question is 100% correct it can be manually or static end result is important From: Ken Wyan kew...@gmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Monday, November 21, 2011 1:11 PM Subject: Re: [OSL | CCIE_Voice] lab - 6 You
Re: [OSL | CCIE_Voice] QoS for Frame Relay
Is the setting set to mandatory under location in CUCM? Randall From: datucha123 datucha123 datucha...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Sunday, November 20, 2011 8:29 AM Subject: [OSL | CCIE_Voice] QoS for Frame Relay hello, everyone. I have several questions about the QoS: 1) As I know, the Frame Relay Fragment Size must be always calculated based on the Interfaces Access Rate? Am I right? And when using the Auto QoS on Frame Relay Subinteface, it will calculate the Framgent Size based on the bandwidth command under the Subinterface, and then we have to manually correct the Fragment Size, so that it will be based on the Access Rate and not on the Bandwidth of an interface, am I right? 2) When configuring the CUCM RSVP CAC, we have to configure the ip rsvp bandwidth command under the Frame Relay DLCI interface, and also configure the RSVP MTPs on the Routers. Each G729 call for RSVP is allocating 40 kbps, and for G711 96 kbps. But now look, I have an issue with the ip rsvp bandwidth command: I have configured the ip rsvp bandwidth 40 under the Frame Relay DLCI (Subinterface), so that I have to have only 1 G729 call, and all other calls should be rejected (Not reserved). But my routers are still reserving more and more bandwidth for subsequent calls. RSVP is not rejecting calls, even if I configure the ip rsvp bandwidth 10 command, the calls are still traversing and are not rejected. I have also added the following command: ip rsvp policy preempt interface Serial0/3/0.1 point-to-point frame-relay interface-dlci 101 ip rsvp bandwidth 40 ip rsvp data-packet classification none ip rsvp resource-provider none But still not succes, even 5 G729 calls are reserved and not rejected. I cannot understand why is it so? The debugs of RSVP does not show anything interesing, they are just saying that the RSVP reservation has been succesfull for each call. Maybe it is an IOS BUG? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] QoS for Frame Relay
Do you have the locations in your Device pool and the proper device pool assigned to the GW? RC From: datucha123 datucha123 datucha...@gmail.com To: Randall Crumm rrcr...@yahoo.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, November 20, 2011 10:00 AM Subject: Re: [OSL | CCIE_Voice] QoS for Frame Relay Yes, Sure, Mandatory (Video Desired) But still no success :( On Sun, Nov 20, 2011 at 9:58 PM, Randall Crumm rrcr...@yahoo.com wrote: Is the setting set to mandatory under location in CUCM? Randall From: datucha123 datucha123 datucha...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Sunday, November 20, 2011 8:29 AM Subject: [OSL | CCIE_Voice] QoS for Frame Relay hello, everyone. I have several questions about the QoS: 1) As I know, the Frame Relay Fragment Size must be always calculated based on the Interfaces Access Rate? Am I right? And when using the Auto QoS on Frame Relay Subinteface, it will calculate the Framgent Size based on the bandwidth command under the Subinterface, and then we have to manually correct the Fragment Size, so that it will be based on the Access Rate and not on the Bandwidth of an interface, am I right? 2) When configuring the CUCM RSVP CAC, we have to configure the ip rsvp bandwidth command under the Frame Relay DLCI interface, and also configure the RSVP MTPs on the Routers. Each G729 call for RSVP is allocating 40 kbps, and for G711 96 kbps. But now look, I have an issue with the ip rsvp bandwidth command: I have configured the ip rsvp bandwidth 40 under the Frame Relay DLCI (Subinterface), so that I have to have only 1 G729 call, and all other calls should be rejected (Not reserved). But my routers are still reserving more and more bandwidth for subsequent calls. RSVP is not rejecting calls, even if I configure the ip rsvp bandwidth 10 command, the calls are still traversing and are not rejected. I have also added the following command: ip rsvp policy preempt interface Serial0/3/0.1 point-to-point frame-relay interface-dlci 101 ip rsvp bandwidth 40 ip rsvp data-packet classification none ip rsvp resource-provider none But still not succes, even 5 G729 calls are reserved and not rejected. I cannot understand why is it so? The debugs of RSVP does not show anything interesing, they are just saying that the RSVP reservation has been succesfull for each call. Maybe it is an IOS BUG? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?
If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DPrandallFrom: Chris Martin clm.c...@gmail.comTo: Voiper datapack...@gmail.comCc: Rrcrumm rrcr...@yahoo.com; "ccie_voice@onlinestudylist.com" ccie_voice@onlinestudylist.com; "kew...@gmail.com" kew...@gmail.comSent: Tuesday, November 15, 2011 12:11 PMSubject: Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?You said your using SLRG? You did assign a route group to each device-pool and reset, correct?ChrisOn Tue, Nov 15, 2011 at 1:42 PM, Voiper datapack...@gmail.com wrote: Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still no success Will keep trying. Thanks,VoiperOn Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm rrcr...@yahoo.com wrote: We're u able to resolve your issue?Sent from my iPhoneOn Nov 15, 2011, at 10:32 AM, Voiper datapack...@gmail.com wrote: Hi Friends:Thank you all for you quick and helpful suggestions. It show you are all very focused and have the determination to get the coveted number. I need to step up my efforts after seeing how you all quickly helped with feedback. All your help is truly appreciated.Voiper@RRCRUMM:Did you reset the h323 gw in cucm? Do you see an ip address towards the upper portion of the page above the name/ ip address field? - The h323 gw is configured and I see the ip addressoutbound calls to pstn using h323 or mcgp gw directly is working@Ashwani ash_r...@hotmail.com Did you bind source interface on HQ router for H323? And same interface's IP assigned on CUCM? Also did you have incoming dial-peer from CUCM? Paste your HQ config here. - interface FastEthernet0/0.20description VOICEencapsulation dot1Q 20ip address 10.10.200.3 255.255.255.0ip helper-address 10.10.210.10h323-gateway voip bind srcaddr 10.10.200.3HQ router config is attached. @Ken Wyan kew...@gmail.com Pls check your route list rl-test config digit manipulations etc.. in rg-test (under rl-test).If you have done any digit manipulations in rg-test (under rl-test) , your RP digit-manipulations will not work Add rg-test as Local Route Group for Device PoolIn addition to debug isdn --- debug ccapi inout , dialpeer may help to isolate issue- No digit manipulations on any of the above. I tried to keep it as simple as possible ran above debug and nothing gets generated. @Pradeep Kumar Sharma sonu.netwo...@gmail.comVerify the registration status of your Route List.Try to reset it once. Run the debug voice ccapi inout on H323 Gw and see if the outbound calls really hitting to the gateway on not ?- route list status unknown. Reset many times. What is your registration status?CCAPI: debug voip ccapi inout is ON (filter is OFF) CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF)- above debug show nothing happening. Call just not reaching the h323 gw@Mohd Baqari baqari.voic...@gmail.com On you gateway, do the following:1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the gateway.2. If signaling is received successfully, run the command debug voice dialpeer. Check which dial peer is matched and whats the configuration of it 3. If no h323 signaling is received, post cucm traces after making a call- above debug show nothing happening. Call just not reaching the h323 gwDo I need to run RTMT for trace? I installed it on my desktop and ran trace 'Collect Files' (attached). First time using, so I don't know if I got the right one? ccm0007.txtccm0007.txtSDL002_100_10.txt HQ-RTR.txt ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?
If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DPrandallFrom: Chris Martin clm.c...@gmail.comTo: Voiper datapack...@gmail.comCc: Rrcrumm rrcr...@yahoo.com; "ccie_voice@onlinestudylist.com" ccie_voice@onlinestudylist.com; "kew...@gmail.com" kew...@gmail.comSent: Tuesday, November 15, 2011 12:11 PMSubject: Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?You said your using SLRG? You did assign a route group to each device-pool and reset, correct?ChrisOn Tue, Nov 15, 2011 at 1:42 PM, Voiper datapack...@gmail.com wrote: Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still no success Will keep trying. Thanks,VoiperOn Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm rrcr...@yahoo.com wrote: We're u able to resolve your issue?Sent from my iPhoneOn Nov 15, 2011, at 10:32 AM, Voiper datapack...@gmail.com wrote: Hi Friends:Thank you all for you quick and helpful suggestions. It show you are all very focused and have the determination to get the coveted number. I need to step up my efforts after seeing how you all quickly helped with feedback. All your help is truly appreciated.Voiper@RRCRUMM:Did you reset the h323 gw in cucm? Do you see an ip address towards the upper portion of the page above the name/ ip address field? - The h323 gw is configured and I see the ip addressoutbound calls to pstn using h323 or mcgp gw directly is working@Ashwani ash_r...@hotmail.com Did you bind source interface on HQ router for H323? And same interface's IP assigned on CUCM? Also did you have incoming dial-peer from CUCM? Paste your HQ config here. - interface FastEthernet0/0.20description VOICEencapsulation dot1Q 20ip address 10.10.200.3 255.255.255.0ip helper-address 10.10.210.10h323-gateway voip bind srcaddr 10.10.200.3HQ router config is attached. @Ken Wyan kew...@gmail.com Pls check your route list rl-test config digit manipulations etc.. in rg-test (under rl-test).If you have done any digit manipulations in rg-test (under rl-test) , your RP digit-manipulations will not work Add rg-test as Local Route Group for Device PoolIn addition to debug isdn --- debug ccapi inout , dialpeer may help to isolate issue- No digit manipulations on any of the above. I tried to keep it as simple as possible ran above debug and nothing gets generated. @Pradeep Kumar Sharma sonu.netwo...@gmail.comVerify the registration status of your Route List.Try to reset it once. Run the debug voice ccapi inout on H323 Gw and see if the outbound calls really hitting to the gateway on not ?- route list status unknown. Reset many times. What is your registration status?CCAPI: debug voip ccapi inout is ON (filter is OFF) CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF)- above debug show nothing happening. Call just not reaching the h323 gw@Mohd Baqari baqari.voic...@gmail.com On you gateway, do the following:1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the gateway.2. If signaling is received successfully, run the command debug voice dialpeer. Check which dial peer is matched and whats the configuration of it 3. If no h323 signaling is received, post cucm traces after making a call- above debug show nothing happening. Call just not reaching the h323 gwDo I need to run RTMT for trace? I installed it on my desktop and ran trace 'Collect Files' (attached). First time using, so I don't know if I got the right one? ccm0007.txtccm0007.txtSDL002_100_10.txt HQ-RTR.txt ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Fw: CME/CUE
- Forwarded Message - From: Randall Crumm rrcr...@yahoo.com To: Online Study ccie_voice@onlinestudylist.com Sent: Saturday, November 5, 2011 7:40 PM Subject: CME/CUE HI, I have a weird problem. When I try to run the wizard from the web gui, it is asking for web username and password. I am putting in admin and cisco and I am getting an authentication error. In my config I have admin/cisco as the web admin. telephony-service sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 br2-xcoder no auto-reg-ephone em logout 7:0 19:0 23:0 load 7960-7940 P00308000500 load 7962 SCCP42.8-3-3S max-ephones 3 max-dn 6 no-reg ip source-address 10.10.110.3 port 2000 time-format 24 date-format dd-mm-yy voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit transfer-system full-consult transfer-pattern .T ! ! ip http server ip http authentication local no ip http secure-server ip http path flash:/GUI thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CME/CUE
HI, I have a weird problem. When I try to run the wizard from the web gui, it is asking for web username and password. I am putting in admin and cisco and I am getting an authentication error. In my config I have admin/cisco as the web admin. telephony-service sdspfarm units 1 sdspfarm transcode sessions 3 sdspfarm tag 1 br2-xcoder no auto-reg-ephone em logout 7:0 19:0 23:0 load 7960-7940 P00308000500 load 7962 SCCP42.8-3-3S max-ephones 3 max-dn 6 no-reg ip source-address 10.10.110.3 port 2000 time-format 24 date-format dd-mm-yy voicemail 3600 max-conferences 8 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit transfer-system full-consult transfer-pattern .T ! ! ip http server ip http authentication local no ip http secure-server ip http path flash:/GUI thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CME phone message display
HI, How do we change the message displayed on the phone when the phone is idle? What about other states as well. Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME phone message display
Thanks I'll try it From: rschukne...@gmx.de rschukne...@gmx.de To: Randall Crumm rrcr...@yahoo.com; ccie_voice@onlinestudylist.com Sent: Wednesday, November 2, 2011 12:08 PM Subject: Re: [OSL | CCIE_Voice] CME phone message display Hi Randall, telephony-service system message Your CME Options: It works only for idle state. /Robert Original-Nachricht Datum: Wed, 2 Nov 2011 09:50:36 -0700 (PDT) Von: Randall Crumm rrcr...@yahoo.com An: Online Study ccie_voice@onlinestudylist.com Betreff: [OSL | CCIE_Voice] CME phone message display HI, How do we change the message displayed on the phone when the phone is idle? What about other states as well. Thanks, Randall -- NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie! Jetzt informieren: http://www.gmx.net/de/go/freephone___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] AAR and Unity Connection
Hi, I am adding the AAR group in CUCM. The name is CUCM. Do I need to put anything in the prefix digits within CUCM? Is there a rule as to when you would add something? Why/when would you add something? Thanks, Randall___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com