I have some equipment available to me to set up my own lab. while
researching some PSTN Router configs I ran accross a translation rule that I
am having some issues figuring out the Regular Expression. The rule is used
to strip the 1 or the 011 from the dialed number. I adopted the one I found
to
So it is just a wild card like the T or the ! in dialplans?
On Sat, Jun 27, 2009 at 2:50 PM, jeremy co wrote:
> Hi,
>
> % is same as * ---> match 0 or more instance of previous character
>
>
> HTH,
>
>
> On Sat, Jun 27, 2009 at 9:11 PM, Bill Hatcher wrot
I am loving the new blueprint material. Have been going through the labs,
and have an issue. I deleted a SIP phone and went to re-add it, but when I
try to add it's Directory number, I get the following error.
"Update failed. Cannot insert or update pattern. A Device Template exists
with the sa
, Chad Stachowicz
wrote:
> did you check the route plan report to see if its still in there? Maybe it
> works differently with SIP phones then SCCP.
>
> Cheers!
>
> Chad
>
> On Mon, Jun 29, 2009 at 11:35 PM, Bill Hatcher wrote:
>
>> I am loving the new blueprint m
I have been able to install this on VMWare ESX without that issue. On
VMWorkstation I had to tell it it was a Windows 2003 Standard Edition, and
enter in a Valid License. If you have the CallManager software installed on
another box, you can use an application like Key Finder to pull the
Microsof
Okay guys SIP seems to be kickig my butt here. First I created a 4 digit
dial-plan with interdigit timeout of 0, but I still have to hit the dial
button on the phone when I try to make a call to another internal phone on
the CUCM.
CME - What can I say, I have yet to get this to work with either a
Where can I find the correct SIP phone load for the 7960/7940 phones. I
have downloaded several versions of CME and they don't seem to have the SIP
7960/40 phone loads.
CME
> and CUCM are same so you will need to go to CUCM download section to get SIP
> load for CME!
>
>
>
>
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher
> *Sent:
I am sure this has been asked before, but can someone tell me what program
to use in order to open the .air file from IP Expert to open ended quizzer?
I downloaded the Voice-Open-Ended-Quizzer.air file, but can not get it to
work.
___
For more information
/ajax/>HTH
> - Basant
>
> On Wed, Jul 8, 2009 at 11:42 AM, Bill Hatcher wrote:
>
>> I am sure this has been asked before, but can someone tell me what
>> program to use in order to open the .air file from IP Expert to open ended
>> quizzer? I downloaded the Voice-Open
Anestis,
I am currently running my lab environment on two 7845 HP server running
VMWare ESXi. I have not had any iisues with this except to get the license
from Cisco for UCCx. they don't like to hand out those licenses to VMWare
installations. I actually had to get my account team involved to
My question is how vm instance you run at the same time on the both MCS
> 7845?
>
> Best Regars
>
> Anestis Koukis
>
>
> 2009/7/9 Bill Hatcher
>
>> Anestis,
>>
>> I am currently running my lab environment on two 7845 HP server running
>> V
Okay this one really has me stumped. I am about half way through lab 5 and
any time I make an LD or international call form HQ Phone 2, I get a reorder
tone after 3 digits. When you run the DNA though, it shows the call being
routed, and routed properly. Anyone have any ideas?
__
As you move through the workbook, the solutions have you do all of the long
distance and international dialing as Translation Patterns, that then point
to a CSS that has access to the International Router Pattern. Since phone 2
is the only phone that is allowed to make calls internationally, and i
I do the same thing, only I will do a graceful shutdown of the server before
I take the snapshot. Call me paranoid, but I so some squirrelly things
going on until I started doing it that way.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf
Does anyone know how to troubleshoot this stuff? I have looked at the
output of DNA, and can not see anything. The trace files aer not much help
either unless you know what you are looking for. My implimentation from the
Lab 5.18 and 5.19 is not working.
Bill Hatcher
Okay last question for lab 5 I hope. I have the IVR up and running and
everything is running fine, except I am able to place 911 calls. Any ideas?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
On Thu, Jul 16, 2009 at 1:07 PM, Bill Hatcher wrote:
> Does anyone know how to troubleshoot this stuff? I have looked at the
> output of DNA, and can not see anything. The trace files aer not much help
> either unless you know what you are looking for. My implimentation from the
&g
and 5.19 is not working.
Bill Hatcher
_
Lauren found her dream laptop. Find the PC that
<http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290> 's right
for you.
___
For more information regarding industry leadi
I will check this out tomorrow. Thanks!!
From: c george [mailto:cisco...@hotmail.com]
Sent: Thursday, July 16, 2009 4:56 PM
To: wchatc...@gmail.com
Subject: RE: [OSL | CCIE_Voice] Lab 5.20 911 question
did you go under service parameters and put 911 in the field to block. Same
place you a
That worked. Thank you, I missed that in the PG.
On Thu, Jul 16, 2009 at 4:56 PM, c george wrote:
> did you go under service parameters and put 911 in the field to block. Same
> place you activated voice mobility. I think its the last box next to
> complete or partial match
>
> Respectfully Cha
Do we know when the next workbooks and Video on Demand updates are due out?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I have a 7960 that was ordered form e-bay with a MGCP phone load on it. It
is locked with a password, and there was not one supplied with it. Does
anyone know the default password, and how to do a password recovery on this
device?
Bill Hatcher
___
For
with it. Does
> anyone know the default password, and how to do a password recovery on this
> device?
>
> Bill Hatcher
>
> --
> Windows Live™ Hotmail®: Celebrate the moment with your favorite sports
> pics. Check it
> out.<http://www.windowsl
upgrade that they worked with IP Blue on?
Bill Hatcher
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
the + is the international escape code. It is used to represent 001, 011,
00 depending on what country you live in.
On Thu, Jul 30, 2009 at 10:05 AM, Deepak sidana wrote:
>
>
> Hi All,
>
>
>
> I was going through the wildcards under Call Routing.
>
>
>
> I have following question.
>
>
>
> What W
previous
> wildcard
>
>
>
> Looking for more explanation on this, as its look confusing to me.
>
>
> If i create route pattern of 51[23]+
>
>
>
> &
>
>
>
> dial 51234, What will be the behaviour?
>
>
> Rgds
> Deepak Si
To answer your first question yes you should get this as part of the BLS.
As to the second question, we all would like to know that one. They should
have some news soon on how they are going to distribute the update. You may
want to keep checking the IP Expert blog for updates.
http://ipexpert
Hey guys, I was going back over Lab 5 since my test is in less than 60
days. I noticed that in 5c it says that the CME should use the Spain zone,
but in the Proctor guide it shows the h323 voip id as PL. Isthis a type-o
in the Proctor guide?
___
For mor
I seem to only have up to lab 5b in my configs. Have they released a more
updated set of configs, and my account just has not been updated?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
declared victory.
>
>
> --
> *From:* ccie_voice-boun...@onlinestudylist.com [
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Hatcher [
> wchatc...@gmail.com]
> *Sent:* Thursday, August 06, 2009 12:21 AM
> *To:* ccievoice
> *Subjec
nored PL and took it to mean
>> Spain. It doesn't matter. I did what the question asked and declared
>> victory.
>>
>>
>> --
>> *From:* ccie_voice-boun...@onlinestudylist.com [
>> ccie_voice-boun...@onlinestudylist.com] On B
from Eddie Izzard, where you can only declare victory
> or ownership with the planting of a flag.
> Don't mind me, going on 19 hours with 4 hours sleep :)
>
>
> On Wed, Aug 5, 2009 at 9:59 PM, Bill Hatcher wrote:
>
>> I'm not sure i know what you mean by a flag.
>>
Congratulations man!!! Great job.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Art Sandborgh
Sent: Friday, August 07, 2009 7:50 PM
To: ccie list
Subject: [OSL | CCIE_Voice] My impression of V3
All,
First - please do not e-mail
I have my own lab hardware so I have had to prot the configurations to my
equipment. I am using 3825's for my HQ, PSTN, BR1 and BR2 gateways. The
only issue I am having is trying to call that India number regiseterd on my
PSTN router from HQ through the Gatekeeper. Looking at the debug h225 asn1
The destination is on the router. It is part of the CME configuration for
the PSTN. Unless it is not reconizing that for some reason.
On Sun, Aug 9, 2009 at 12:08 PM, c george wrote:
> gw hopofff configure this since the destination is not on the router but yu
> a asking the router to forward
I am trying to bring up B-ACD for the first time, and I keep getting
warning: parameter "the parameter I am configuring" has not been registered
under aa namespace. I do not know TCL scripting and have never configured
B-ACD so am a little out of my depth here. Any help would be appreciated.
t; *-- *
>
> *Best regards,*
>
> *Ilya Rubinchik*
>
> *Chief UC Engineer*
>
> *Mars Solutions Ltd.*
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher
> *Sent:* Friday, Augus
There is no hard and fast rule here. In the US the convention is to dial 9,
but you can setup anything you want. At one of our sites, we changes the
PSTN access code form 9 to 8 because when people would go to dial a LD
number, they would accidental hit the 1 twice. This would in effect be 911
a
Integrated Unity Connection in with the CallManagers and I can call the
pilot number with no issues from the BR1 and H! Phone 2. When calling the
phones to leave a message, they go to fast busy when they get redirected to
Unity. Not sure what is going on here. Anyone have a document that shows
t
Other than color, is there any difference in the functionality between the
7970/71 model phones and the 7962 phones that are used in the Cisco Lab?
The 7970/71 phones are a lot cheaper on e-bay than the 7962 phone.
___
For more information regarding indus
>From CUE, I just reset it to factory default. That wipes the config
completely.
From: Nara Shikamaru [mailto:shikam...@kagadis.com]
Sent: Thursday, August 20, 2009 6:08 PM
To: Bill Hatcher
Subject: Re: [OSL | CCIE_Voice] Resetting configs on home lab equipment
Yeah, that looks like
yes you can. I have 3 switches so I really don't mess with those to much.
On Sun, Aug 23, 2009 at 11:55 PM, Nara Shikamaru wrote:
> Bill,
> Quick question; after you reload your configs, you go in and delete
> vlan.dat manually, right?
>
> On Wed, Aug 19, 2009 at 9
I have been trying all day to access the web site and have been unable.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I keep getting the following error on one of my T-1's and one of my E-1's.
ISDN Se0/2/1:23 Q931: Ux_DLRelInd: DL_REL_IND received from L2
I have found several forums where other people had had this issue, but have
not found a resolution. Has anyone else seen this before? When I do a show
isdn s
have this command under PSTN PRI d-channel “isdn
> protocol-emulate network”
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher
> *Sent:* Friday, 28 August 2009 2:12 PM
> *To:* ccievoice
>
of your PSTN
> and BR1 config
>
>
>
> *From:* Bill Hatcher [mailto:wchatc...@gmail.com]
> *Sent:* Friday, 28 August 2009 2:29 PM
> *To:* Aamir Panjwani
> *Cc:* ccievoice
> *Subject:* Re: [OSL | CCIE_Voice] PSTN Router issues
>
>
>
> I do. The two links that ar
with MGCP and
> something we must know how to get it working in the exam pretty quickly
>
>
>
>
>
>
>
> *From:* Bill Hatcher [mailto:wchatc...@gmail.com]
> *Sent:* Friday, 28 August 2009 3:07 PM
>
> *To:* Aamir Panjwani
> *Cc:* ccievoice
> *Subject:* Re: [
Can anyone tell me what the Informix Account Password is used for when
installing Cisco Data Migration Assistant?
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Can someone please tell me what load to use for SIP on the CME for the Cisco
7941/61 phone model? I see 3 types of files to download, the .zip the .cop
and the .cop.sgn file on Cisco's site, but they all referance CallManager
only.
Bill
___
For more inf
I'm hoping someone can help me out here. I am trying to understand the
process of how Unity Connection turns on the MWI light on a phone across a
SIP trunk when the CUCM has a full E.164 dialplan. I can see that the SIP
NOTIFY is sending the MWI notify across the trunk, but I never see when the
M
I am trying to build a CCIE Voice lab at my house. I am looking at
equipment on eBay and nned to know what is the difference between
VWIC-2MFT-T1-DI and VWIC-2MFT-T1-DIR and can I use these inplace of a
VWIC-2MFT-T1?
___
For more information regarding in
Has anybody had issues powering up phones when using the NM-ESW-16? I have
two phones on my BR1 router, 7940 and a 7961. The 7940 is running a SIP
load and powers on fine, but the 7961 running a SCCP load will not power on
at all. I'm running firmware version 9-3-1SR2-1S. Any help would be much
Anthony,
Which dial-peer are you needing help with?
On Wed, Oct 16, 2013 at 4:05 PM, Anthony Nwachukwu
wrote:
> Hi,
>
> I need help with explanation of the dial-peer below.
>
> R2(config-dial-peer)#destination-pattern 9[2-9]..
> R2(config-dial-peer)#port 1/0/0:23
> R2(config)#dial-peer voic
I have been looking for quick and easy ways to test SRST, and I've found
many different waqys of doing this. With the exception of pulling the WAN
interface, they all seem to take a lot of time and effort to accomplish.
Anything from creating access-lists to block the traffic to creating new
call
It’s not working!! Can anyone see something I may be doing wrong? My PRI
and CUE register, I can even see SIP MWI being sent, but my phones will not
register. They worked when I was using call-manager-fallback though so I
know my SRST configuration is correct on the CallManager.
telephony-serv
rds,
> Ramcharan Arya CCIE # 28926 ( Voice/Routing & Switching)
>
>
>
>
> On Thu, Oct 17, 2013 at 9:34 AM, Bill Hatcher wrote:
>
>> It’s not working!! Can anyone see something I may be doing wrong? My
>> PRI and CUE register, I can even see SIP MWI being sent, but my
gistered.
>
> Marty
>
>
> On Thu, Oct 17, 2013 at 10:34 AM, Bill Hatcher wrote:
>
>> It’s not working!! Can anyone see something I may be doing wrong? My
>> PRI and CUE register, I can even see SIP MWI being sent, but my phones will
>> not register. Th
old.au
cor incoming css-inter default
On Thu, Oct 17, 2013 at 10:29 AM, Bill Hatcher wrote:
> Ramcharan,
>
> I'll give that a try.
>
>
> On Thu, Oct 17, 2013 at 10:18 AM, Ramcharan Arya > wrote:
>
>> Hi Bill,
>>
>> I believe this might be relat
e confidential and may contain privileged
> information. Any unauthorized review, use, retransmission, or other
> disclosure is strictly prohibited. If you have received this message in
> error, notify the sender immediately, and delete the original message. ***
> *
>
> ** **
>
Ok, I figured out my issue with the MWI not coming on in SRST more. Need
to ass the key word unsolicited to the mwi-server command.
Now to get the CME-SRST working.
On Thu, Oct 17, 2013 at 10:36 AM, Bill Hatcher wrote:
> Seifeddine,
>
> I've run that debug, but there is absol
Ok the re-boot worked and now I can register my phones to CME SRST on a WAN
failure, and the CUE MWI works!!
I did have to go in and edit the call-foward parameters on the ephone-dn
with voicemail, and add my cor-list info to all the lines.
On Thu, Oct 17, 2013 at 10:53 AM, Bill Hatcher wrote
hu, Oct 17, 2013 at 11:46 AM, Alex Mendoza wrote:
> Hi Bill
>
> I use your way to test SRST, I'm wondering what are you using for test
> Route List when they have 2 route groups.
>
> best regards.
> Alex
>
> On Oct 17, 2013, at 09:23 AM, Bill Hatcher wrote:
>
>
e the fix for that is
>> to globally set 'voice hunt 2' and under the ephone-dn's assign a higher
>> preference (I use 9).
>>
>>
>> On Thu, Oct 17, 2013 at 11:53 AM, Bill Hatcher wrote:
>>
>>> Ok, I figured out my issue with the MWI no
rameters -Cisco IP Voice Media Streaming App
Supported MOH Codecs - G711 mulaw and G729 Annex A
HTH
Bill Hatcher
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE an
1? Default CS3 should be good, let me
> know if I'm wrong on this?
>
> Rob
>
>
> On Thu, Oct 17, 2013 at 1:39 PM, Bill Hatcher wrote:
>
>> My test is just a couple of weeks away, and I've been reading different
>> blogs on how to maximize your time. The
od because I think it is the wrong approach to fixing that problem. I
> leveraged the IOS config command: "no dial-peer out status pots"
>
>
> HTH.
>
> -Bill
>
> --
> William Bell, CCIE #38914
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
&g
Thank you all for sharing your ideas and insights. All of this is great
information and I will incorporate it into my plan of attack for my Oct
29th attempt.
Bill
On Fri, Oct 18, 2013 at 9:06 AM, Bill Hatcher wrote:
> Bill,
>
> One other question, I'm not familiar with the co
best
>> practice" system wide. I think we could skip setting the DSCP values in
>> CUCM.
>>
>> If you think the question calls for it you can have your class-map match
>> both AF31 and CS3 for signaling.
>>
>>
>>
>> *From:* ccie_voice-bou
That's great information Bill. I think I might start leveraging that command on
my real world deployments.
Sent from my iPhone so please excuse any spelling mistakes.
Bill Hatcher
> On Oct 18, 2013, at 9:42 AM, William Bell wrote:
>
> Bill,
>
> You can read about the c
First you will need to configure some users in unity, and assign them as
administrators on Call Handlers.
When you hit the greeting administrator you will be prompted to enter your
user ID and password, example 5002 and a vm password of 12345. Once you
have been authenticated it will ask you to e
,
>> Viki
>>
>> On Monday, October 21, 2013, Martin Sloan wrote:
>>
>>> Also make sure to assign the 'Greetings Administrator' role to the
>>> subscriber/end user account.
>>>
>>>
>>> On Mon, Oct 21, 2013 at 3:15
Stefano,
When you go to that URL with your browser, using Internet Explorer go to
view and source. This will allow you to see the xml format on the page.
You should be able to edit from that.
Bill Hatcher
On Thu, Oct 24, 2013 at 8:08 AM, StefanoS wrote:
> Hey Somphol thank you for y
Anytime.
On Fri, Oct 25, 2013 at 8:25 AM, StefanoS wrote:
> Hey Bill.
> You're right that's a nice tip to fast find and copy the code you need to
> create your xml.
>
> Thank you,
> Stefanos
>
>
> On Fri, Oct 25, 2013 at 4:02 PM, Bill Hatcher wrote:
>
&
rking just fine for me.
Eg.
interface Serial0/0/1:0
ip rsvp bandwidth
!
interface Serial0/0/1:0.1 point-to-point
ip rsvp bandwidth 80
Bill Hatcher
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
CTI
Allow Control of All Devices.
The CUPS System Configuration Troubleshooter is showing all Green as well
Any ideas would be greatly appreciated since I fly out tomorrow to take my
lab on Tuesday, and this is really worrying me.
Bill Hatcher
__
You're absolutely right, I never noticed that before. Thank you!! :)
Bill Hatcher
On Sun, Oct 27, 2013 at 2:21 PM, Ravindra Lakpriya wrote:
> if i remember correctly When you do that in sub interface it will get
> applied to the main interface as well
>
>
> On Sun, Oct
e upper right corner. I was using the Desktop
> Controlling at that time. Actually it was a Jabber on a 9.1 UCM/Precense
> though.
>
> c) Have you associated the UPC profile with the Primary device name? Are
> you using md5 passwords?
>
> Stefanos
>
>
> On Sun, Oct 2
using the Desktop
>>> Controlling at that time. Actually it was a Jabber on a 9.1 UCM/Precense
>>> though.
>>>
>>> c) Have you associated the UPC profile with the Primary device name? Are
>>> you using md5 passwords?
>>>
>>> Stefanos
User has both CUP and CUPC enabled under capabilities assognment.
On Sun, Oct 27, 2013 at 4:40 PM, Joel Murphy wrote:
> How about licensing? Just a thought.
> On Oct 27, 2013 2:47 PM, "Bill Hatcher" wrote:
>
>> I have encountered a very frustrating issue. I can d
rrect to me.
> On Oct 27, 2013 4:42 PM, "Bill Hatcher" wrote:
>
>> User has both CUP and CUPC enabled under capabilities assognment.
>>
>>
>> On Sun, Oct 27, 2013 at 4:40 PM, Joel Murphy wrote:
>>
>>> How about licensing? Just a thought.
&
It has something to do with my HQ
device pool. I'm not sure what's going on there.
On Sun, Oct 27, 2013 at 4:55 PM, Bill Hatcher wrote:
> I just noticed that under the end user page in presence none of the HQ
> users have any devices listed.
>
>
> On Sun, Oct 27, 201
If I rename my HQ2 user and the UPCHQ2 device to SiteA2 and UPCSITEA2 it
works. Have no clue whats going on here.
On Sun, Oct 27, 2013 at 5:29 PM, Bill Hatcher wrote:
> Scratch that. It's not the Device Pool. The user I'm trying to get the
> softphone working for was
I would think you would need a transcoder at the site of your h323.
On Sun, Oct 27, 2013 at 5:25 PM, Olu Oguntuga wrote:
> Hi there,
>
> Could someone please explain how to configure the following scenario:
>
> I need to enable fast start for outbound and inbound call between pub ,
> sub and a h
ager Express -> Configure
-> Configuration Guides -> Cisco Unified CME B-ACD and Tcl Call-Handling
Applications and searching for the key word "embedded".
Bill Hatcher
___
For more information regarding industry leading CCIE Lab training,
Stefano,
Something else you will want to watch for once you get it working. If you
want the Remote caller ID to be presented to all sites as if the
call originated from the users desk phone, then the remote CLID at each
sites gateway must be an exact match to the remote destination if the
servic
Try this.
Products -> Unified Communications -> Communications Gateays -> Voice
Gateways -> Cisco Voice and Video Conferencing for ISR Routers ->
Configuration Examples and TechNotes -> Enhanced Transcoding and
Conferencing for IOS Voice Gateways in a CallMananger Network using DSP
Resources Confi
Actually I was mistaken. The best I can tell is the link is broken. It
should be
Products -> Cisco IOS and NX-OS Software -> Cisco IOS -> Cisco IOS Software
Release 15M&T -> Cisco IOS 15.1M&T -> Configure -> Configuration Guides ->
Cisco IOS Voice Configuration Library -> Cisco IOS Call Control
Ken,
I would recommend reading the Media Net QoS SRND. Also the Enterprise QoS SRND
version 3.3.
HTH
Sent from my iPhone so please excuse any spelling mistakes.
Bill Hatcher
> On Jan 22, 2014, at 9:17 AM, "Kenneth Staples (kstaples)"
> wrote:
>
> Thanks for y
I was at Cisco Live this last week, and had the honor to attend the CCIE
Collaboration Techtorial with Ben Ng. During one of the breaks I asked him
if 2900/3900 routers were really needed for study, and how many 9971's
would I need. A lot of us have made significant investments in our home
labs a
90 matches
Mail list logo
