Many thank Justin. This is very helpful.
Best regards
Paul Onwude
(Please excuse the brevity of this email as it was sent via a mobile device.
Kindly excuse misspelled words or sentence structure)
On 4 Nov, 2013, at 7:28 pm, Justin Carney justin.s.car...@gmail.com wrote:
If you're adding
If you're adding the plus I cucm this is expected behavior that it will be
lost at the ios gw. You're not missing anything on cucm, this is just how
h323 works on ios routers...the only option is to add a plus in the ios
gateway.
IOS/h323 will (by design, unfortunately) discard a plus in dnis on
Hi Adam,
I found this in CCM service settings for some of H323 parameters :
Ensure that calls over QSIG trunks do not utilize + because it is not
supported by QSIG. This parameter has no effect on H.323 outbound calls
because H.323 unconditionally strips the + sign when routing outbound calls.
it's fine on SIP, it's only h323 that can't handle the + sign.
and it's not a dial-peer that strips it, when call manager sends the h225
setup, + is already NOT present there...
Regards,
On Thu, Mar 24, 2011 at 2:08 AM, Adam Thompson phoe...@fatturtle.comwrote:
The + gets stripped by the voip
This has been a pretty long discussion about the normal behaviour of
H323. The '+' expression is recognised by MGCP and SIP GWs, not H323.
If you want an H323 GW to send the full E164 number starting with '+'
you need to apply a voice translation rule. For example you can apply
the rule on the
one small correction. It would be translate calling since we are talking
about callerid.
On Thu, Mar 24, 2011 at 8:20 AM, Bill Lake whl...@gmail.com wrote:
This has been a pretty long discussion about the normal behaviour of
H323. The '+' expression is recognised by MGCP and SIP GWs, not
Well, I might have found my answer:
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002862
Poster says that h323 gateways can't process the plus. Can anyone confirm?
Adam Compton
On Wed, Mar 23, 2011 at 8:15 PM, adam compton com...@gmail.com wrote:
I'm using external
PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] H323 gateway doesn't send the plus on
outgoing PRI calls
Well, I might have found my answer:
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002862
Poster says that h323 gateways can't process the plus
The + gets stripped by the voip dial-peer. You will always have to add the +
back when sending to a H323 or SIP gateway.
-Adam
On Wed, Mar 23, 2011 at 8:19 PM, adam compton com...@gmail.com wrote:
Well, I might have found my answer:
