Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Did I miss something? Was the Super Bowl on Saturday? [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle Dale McIntosh 1966/67 Chevelle Reference CDs ACES #1709/TC GOLD #92

Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Depends on the car. Since I would more then likely need to pull some cash out of the Chevelle fund, I want to keep it to less than $5K for now. I am not looking for a great car - just a good solid body I can put together later on. Perfect car? 1964 El Camino - no rust, no engine, no transmissio

Re: [Chevelle-list] Re Quarter Panel installation Cost

I too have looked at the Goodmark install through C. Hopkins in Ga. I just picked up a 67 convertable in parts for my next project. (on a 71 442 conv. now) I anticipate that I will take it to Ga. for 1 quarter and full floor/trunk and rockers. The car I bought did not have front clip so I have also

Re: [Chevelle-list] Re Quarter Panel installation Cost

That's kind of depressing news. I've had this 70 SS about 10 years and was ready to proceed, but with those costs, it may be out of my price range. It still needs a front clip and other things too. Thanks for the Info. --- Mike Holleman <[EMAIL PROTECTED]> wrote: > That was the point of my p

Re: [Chevelle-list] 68 chevelle seats

Biggest difference between '67 and '68 is that the '68 seat backs are plastic ... '67 are metal and of course the design of the fabric. Frames/tracks are the same. Donnie

[Chevelle-list] For KARL GROVES

Hello Karl, I will venture a probability of it being the Clutch Fan and "possibly" the Tensioner altho the tensioner would invariably toss off the belt and of course this action would be very noticeable. I've completely removed the Clutch Fan from our '64 Chevelle El Camino simply because whil

Re: [Chevelle-list] Re Quarter Panel installation Cost

That was the point of my post. It is expensive to get good metal work done. That two hundred hours covered all the metal from the back of the roof to the bumper. I had to remake the piece above the rearend and the piece that goes under the rear panel. Usually if a car needs quarters and trunk pa

Re: [Chevelle-list] Re Quarter Panel installation Cost

I had just the driver skin put on my '66 at Maaco about 5 years ago, and it ran over $500- and that was just for them to tack it in place. The only reason I had them do it is b/c that side of the car had been hit in the past, and I'd never done a skin prior to that one. So I let them tack in in p

Re: [Chevelle-list] 68 chevelle seats

I have a pair of 67 bucket seats with tracks, not sure in the difference of 67 & 68. Completely stripped down to frames. I live in San Jose, Calif. for an idea of shipping distance. Let me know if you are interested. Tony [EMAIL PROTECTED] wrote: looking for set of buckets seats with tr

[Chevelle-list] Rear Quarter pannel

Is that the full pannel or just part? www.howardsbackyardautobody.com Howard

Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Superbowl Saturday - Good Day For The ChevelleWhat kind of budget do you have for an El Camino? Clint Hooper H&H Custom,owner 1969 El Camino protourer http://dalesplace.com/misc/friends/clint/clint_hooper.htm http://www.lateral-g.net/members/hooper/ "You may find me dead one day in a ditch. But by

Re: [Chevelle-list] Quarter Panel installation Cost

One of my best friends has a 69 SS-396 Camaro that he's owned since 1971. It needs rear quarters,trunk floor,etc and he's planning to trailer it over to Goodmark to do all the work on the car. Their prices seemed pretty reasonable. Clint Hooper H&H Custom,owner 1969 El Camino protourer http://dales

Re: [Chevelle-list] Re Quarter Panel installation Cost

200 hours? Good Lord! At a nominal shop rate of $50/hr,that would equate out to $10,000. Clint Hooper H&H Custom,owner 1969 El Camino protourer http://dalesplace.com/misc/friends/clint/clint_hooper.htm http://www.lateral-g.net/members/hooper/ "You may find me dead one day in a ditch. But by God,you

Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

I am actually in the market for an El Camino, since my last deal fell through. I already bought one longroof (a van for my wife – I know, flame suit on). If you see a good Camino in central California – give me a shout. T.J. Ringlein US Air Force Clovis, California _ From: Dale [m

Re: [Chevelle-list] Quarter Panel installation Cost

Goodmark charges $750 at their Georgia installation center for 66-67, and 70-72 coupes. Something to think about. Even with shipping charges, that is not a bad price, and good panels to boot. My body guy here in Clovis quoted me around $900 to install the panel - so that is the route I am going.

[Chevelle-list] OT - F**D serpentine belt

My daily driver is a 1992 F**D Bronco. Recently, I've been hearing a ton of squeaking from the serpentine belt. I'm wondering if it is the belt, the tensioner, or the fan clutch. Here's why: Initially, the squeak only happened when the engine was first started. Now it is almost constant. The sq

Re: [Chevelle-list] Re Quarter Panel installation Cost

Roger, That is a major job. I would guess you are being quoted more than 150 man hours to do this. It takes that and more to do it right. This also will most likely require new inner fenders as well. I just finished this job on a 66 Chevelle. It was closer to two hundred hours. Plus I had to mak

Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Don’t know if you’re a longroof fan but there’s a 70 Nomad wagon on eBay in Clovis – item #280078485222 – asking price is $3100 Dale McIntosh 1966/67 Chevelle Reference CDs ACES #1709/TC GOLD #92 _ From: [EMAIL PROTECTED]

[Chevelle-list] Re Quarter Panel installation Cost

I need to have two quarter panels and trunk floor installed. Has anyone paid to have that done lately? The body shops here in town seem to want an exorbitant amount of money to put them in for me. They're full quarter panels, not skins. Thanks

[Chevelle-list] C clips

Sorry I took me so long to respond I was out of town. Thanks to everyone that helped find the c clips on ebay. I hadnt had much time to track some down yet so this helps a lot Thank you Ryan

Re: [Chevelle-list] Ancient History

Jim My line of work is heating and air conditioning so if you have any questions regarding hanging your reznor I would be more than glad to give you ideas and suggestions. Seems like on this list I am always asking questions so being able to maybe answer one or two might help offset all the ro

[Chevelle-list] 68 chevelle seats

looking for set of buckets seats with tracks for 68 chevelle. any one?

[Chevelle-list] John, 66 Malibu.

Hello John, I've had the same problem with the same leak and I still have the same leak which i hope will be corrected to NO LEAK with the installation of a NEW OEM Timing Cover and Gasket as well as the Pan Gaskets. I WAS running a Synthetic Blend "oil" and it will of course being like water,

Re: [Chevelle-list] Timing cover pan gasket

thanx Mike..I'll try that...I fired the engine up again yesterday to see exactly where the leak was coming from and found that it had slowed down to about 1/4 or even less than it was initially..Hopefully i will get this solved without a major tear down.. John 66 Malibu

Re: [Chevelle-list] C Clips

Ryan, a list member has a set on eBay right now. http://cgi.ebay.com/ebaymotors/NOS-GM-AXLE-LOCKS-64-65-67-68-69-70-71-CH EVELLE-CAMARO_W0QQitemZ270086157084QQihZ017QQcategoryZ33728QQrdZ1QQcmdZV iewItem John L. ACES #5597 70 LS5 TRIBUTE http://chevellfan.

Re: [Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Hi T.J., What year is your Chevelle? It sounds like you've got quite a project rolling, good luck and have fun while you're at it! Maybe one of the guys on the list will be interested in posting some of your pics so we can all watch your progress. Herb _ From: [EMAIL PROTECTED] [mai

[Chevelle-list] Superbowl Saturday - Good Day For The Chevelle

Folks- I lurk a lot – just because I am busy as hell most of the time. I see that lately the list creator has worked his way back to the list, welcome back Mitch. I have only been a member for a year or so, but thought I would say a few words. Today was my most productive day on the Chevelle in y