Re: Is it a just a myth??? (CCIE w/out CCNP)

I'll advice that you have enough pay for about 3 or 4 attempts of the CCIE exam. However after that I still can't guarantee anything [EMAIL PROTECTED] on 07/05/2000 04:42:43 AM Please respond to [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: Oladele Ayuba/C/Africa/Mobil-Notes) Subj

CLSC exam on Saturday.

Dear all, Which part should I pay more attention on ? Token ring? ATM ? Specification for each Catalyst Switch? Troubleshooting? Thanks very much for your help. -- Jacques Lee CCNA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, l

Is it a just a myth??? (CCIE w/out CCNP)

Hey Groupies ;) It's me again. I have another question for you. I was wondering if anybody knows anyone who got their CCNA and then skipped the CCNP to go strait for their CCIE. Is this just in dream land or is this actually possible? I ask this because I just found a lab partner who has al

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

On Tue, Jul 04, 2000 at 11:19:17AM -0500, Michael L. Williams wrote: > access-list 10 permit A.B.C.1 255.255.255.24 ^^^ This is wrong. Why "don't care bits", if you have a specific A.B.C address ? Correct is: access-list 10 permit A.B.C.1 0.0.0.24 -- And

Cisco Press Errors

Does anyone know of websites/newsgroups that post corrections to mistakes in Cisco Press publications? They may be official or not-- I don't care. I found a subnet address error in the Routing TCP/IP book for one of the static routing config examples. I was pulling my hair out thinking I was not

BCRAN

Hello All, I am taking the BCRAN this Saturday. I have read the Cisco Press and I have been practicing with the Boson exams. Does anyone have any other suggestions? Bruce [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html

aaa if-needed

Hello, "aaa authentication ppp if-needed: does not authenticate if user has already been authenticated on a TTY line". What does it mean? Thanks in advance. Jim __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.co

RE: dial up to 2501 AUX port

Hi there Brad Your helper addresses all set up ok ? Cheers Olden -Original Message- From: Brad Ellis [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 2:50 AM To: [EMAIL PROTECTED] Subject: Re: dial up to 2501 AUX port It is too funny that you posted that. Im working on that

Re: Internal T1 WIC

It is common with physical interface frame relay or multipoint that you can't ping your own interface, but I've not seen this with ptp. To make self ping work on phy/mp, add a frame map with your local ip and use any valid dlci. JOE CCIE 5917 ""psuin1997"" <[EMAIL PROTECTED]> wrote in message

Re: dial up to 2501 AUX port

Olden, hi! Yes, they are setup properly. It'll give my PC an IP address, DNS server info, etc. The only thing it doesnt seem to get right is the subnet mask. Very strange. I setup dial-up networking on another laptop and it does the same thing. However, this one seems to work with IE5 (I can

Re: Return of the Chat Room

LOL it is : http://www.allnetllc.net/chat/ciscochat.htm <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > In a message dated 7/5/00 12:39:06 AM Eastern Daylight Time, > [EMAIL PROTECTED] writes: > > << www.allnetllc.net.chat/ciscochat.htm >> > > Sorry friend, th

Re: Return of the Chat Room

In a message dated 7/5/00 12:39:06 AM Eastern Daylight Time, [EMAIL PROTECTED] writes: << www.allnetllc.net.chat/ciscochat.htm >> Sorry friend, the link you dropped is dead ;) Mark Zabludovsky ~ CCNA [EMAIL PROTECTED] "My peers always told me that growing up would have a huge impact on my

Re: CCIE Lab Study Guide

To note one of the huge errors in the book: In the picture setups for some of the labs, it has the B router having 2 serial O interfaces which confused the hell out of me and a friend for a bit. Sorry dont know where you can find an answer page to all the mistakes...good luck Mark Zabludovsky

Re: NAT and BGP

Please use the Desktop (above) version of IOS. tayta wrote: > Our IOS running on a 7200 does not support NAT! We are at present running > BGP, > > we need to start running NAT, > > The question is can you run both BGP and NAT on the same (7200) router ? > > thanks > > Tayta > > _

Re: Layer 3 VS. Layer 2

And don't forget Layer 1 switching (sometimes called routing)! ;-) See http://www.techreview.com/articles/july00/fairley.htm for a well-written article on optical switching. Priscilla At 12:02 PM 7/4/00, Howard C. Berkowitz wrote: >>"Rodney Jackson" <[EMAIL PROTECTED]> wrote, >>Guys, >> >>I n

Return of the Chat Room

Hi all, I've been distracted for a while from the things that really matter... like my website! The Marc Russell Chat Transcript is finally online! View it at: www.allnetllc.net.chat/ciscochat.htm Just click on Marc's name in the schedule area to read the transcript. Also, there is a mail lis

Re: 4000 router boot TFTP

Hi Jim, Usually if your ethernet interface on the 4000 is plugged into a dumb hub, then when you boot up the 4000, it should bring up the ethernet interface pretty fast which should allow the 4000 to talk to the tftp server(10.1.1.9 in your case) right away. Unless you plug your 4000's ethernet i

4000 router boot TFTP

Hello, I'm trying to configure my 4000 router to boot from TFTP, but it always boots from flash. I suspect that it's because when it boots up, the ethernet ip address hasn't been up yet. Is there any work around? My 4000 router bootstrap ver is 4.6(4) Here is my config: boot system tftp c4000-j

no promt

not that I am one to argue with a CCIE however. I will make an exception.. hehe Hi Brad http://www.cisco.com/warp/public/cc/cisco/mkt/access/1400/prodlit/1401_ov.ht m here is the deal on the 14xx series .. Also it list a console port as says it can be configuredby the console port.. Are yo

at last an easy cisco product index

http://www.cisco.com/warp/public/779/smbiz/service/go.htm Oz http://www.mcseco-op.com/Cheap_Cisco_stuff.htm ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report miscond

More puzzles - OSPF Network statements

Chuck, Do you really mean that address/mask pair for the second network on your list? And I assume we are to incorporate ONLY those networks into the OSPF process (otherwise the answer's easy... :-)? JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 05/07/2000 12:14 -

Dark side of the puzzle More puzzles - OSPF Network statements

Chuck, I agree that problems like this do provide practice in masking. Let's make very sure, however, not to give the impression that minimizing the number of statements -- definitely OSPF network, and arguably access lists -- is a good idea for the real world. Consider the situation when one

Re: CCO login

http://www.cisco.com/warp/public/767/consultant-online.html David Cooper CCNP/CCDP ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure v

Internal T1 WIC

I have a situation where a 1601 R 12.0 (3) is on ptp frame at frac T with 1 channel assigned...Everything works but I can't ping the private ip using Class A.However the E0 side pings and works fine but can't emulate NAT... Why can't I ping inband on the serial? I have tried numerous setti

Re: Switch backplace capacity - how much do you need?

This was done last year by both MS and Mklinux. There were more DOS attacks than anything. In the end Mklinux was cracked because of a bad cgi script. I think it would have been a different story had all ports been locked down. On Tue, 04 Jul 2000, Lou Nelson wrote: > Better yet, > Advertise it t

Ports for Internet Mail

Let's use this scenario. 1. The clients are inside the corporate network, with private IP. Let's say 192.168.1.0, public range 202.166.1.0/28. The router is doing dynamic NAT. 2. The E-mail server is in the ISP. 3. Primary DNS is inside corporate network. I use following access-list, however the

More puzzles - OSPF Network statements

Gee, the recent wildcard mask puzzle was so much fun, let's do it again. The problem revolves around the OSPF network statement. Given an OSPF routing process, what are the fewest number of network statements that will incorporate the following networks into the given OSPF process? For example:

RE: Wild Card Mask Puzzle SOLUTION!!!!!!

Two points. 1) always be careful with the wording of questions. There are two correct answers, depending upon how one interprets the question. Access-list 10 permit 0.0.0.1 255.255.255.24 is indeed correct IF you want to permit only the values of 1,9,17,and 25 in the last octet of ANY network,

Re: dial up to 2501 AUX port

It is too funny that you posted that. Im working on that scenerio right now. See below for what I have so far. I cant seem to get my workstation to obtain the correct subnet mask. It will connect to my term server's aux port, and it can ping through to UUNET's DNS server, but the darn thing wo

CCIE Lab Study Guide

There are many errors in the All-in-One CCIE Lab Study Guide. is there an "errata" or something like that to note what are wrong in the book? thanks in advance ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subs

What is Collaboration

Err... what context are you talking about? My dictionary (Penguin modern English) defines: Collaborate: work in conjunction with another; produce work jointly (esp literary work); assist and cooperate with an enemy occupier of one's country. If you do a search on CCO, the first hit is: Collab

dial up to 2501 AUX port

Hello, Can someone post a working dial up (from windows 95/NT) to 2501 aux port configuration? I'm not talking about DDR. Thanks in advance. Jim __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ __

Re: CCO login

Not that I will qualify at the moment but look at Cisco's: http://www.cisco.com/public/scc/ there's the info you asked grtz... Erik "Michael L. Williams" wrote: > Okay now I have a question. > > What prerequisites are there to signing up for a CCO account? Its sounds to > me like t

Re: CCO login

1. Registered Reseller 2. Consultant Program 3. Valid Contract "Michael L. Williams" wrote: > > Okay now I have a question. > > What prerequisites are there to signing up for a CCO account? Its sounds to > me like that's where the goods are! > > Let me know so I can sign up! > >

CCO login

Okay now I have a question. What prerequisites are there to signing up for a CCO account? Its sounds to me like that's where the goods are! Let me know so I can sign up! Mike W. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.h

Re: Set up question

You need to call phone company for both the frame realay, and for a DLCI to map your pvc to isp. I have a suggestion though. Why doesn't your company get DSL at the branch (and even hq) then use an IPSEC VPN to tunnel to the branch and vice versa. If your branch is going to come to the HQ to use

Re: Looking for CVOICE Books

Agreed! Roman <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Thanks Peter - VERY informative. Much appreciated. > > Roman ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subs

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

Sorry for overlooking you! Good job! Mike W. John Neiberger <[EMAIL PROTECTED]> wrote in message 32064763.962730060174.JavaMail.imail@tiptoe">news:32064763.962730060174.JavaMail.imail@tiptoe... > Thanks, Evgeny. My answer had that mask 0.0.0.24, which would only allow > specific hosts on a spe

What is Collaboration

Can someone explain what Collaboration is? Brian Email Address [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure vio

ACL quiz

Hi all, For the gurus: Please make a habit of posting such questions - this stuff is not to be found in books - this is real life. Thank you. Mihai ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription in

Re: Looking for CVOICE Books

Thanks Peter - VERY informative. Much appreciated. Roman >The following are my own personal opinions and observations and are not >meant to represent the official views of the company that I work for. > >I have recently passed CVOICE 1.0 > >A few personal comments: > > The exam I sat

Re: Switch backplace capacity - how much do you need?

Better yet, Advertise it to alt2600 and tell them "U cant touch this... I have locked this down so smartly... and none of you are bright enough to get into it" PS..Back up all critical data before doing this and ensure you have no info on the unit that you don't mind on the front page of the New

Re: Switch backplace capacity - how much do you need?

Scalable platforms, ranging from the Catalyst 6000 Series which offers 32 Gbps of switching capacity and scalable multilayer switching up to 30 Mpps, to the Catalyst 6500 Series offering scalable switching capacity up to 256 Gbps and multilayer switching up to 150 Mpps http://www.cisco.com/univer

Re: Looking for CVOICE Books

The following are my own personal opinions and observations and are not meant to represent the official views of the company that I work for. I have recently passed CVOICE 1.0 A few personal comments: The exam I sat was based very heavily upon CVOICE course notes. So a set of CVOICE cou

RE: Spanning Tree

Title: Spanning Tree Well, I'm studying for Switching 2.0 so I may be wrong. The way I see it, the root port is the "upstream" port (this is tree, so there are upstream and downstream ports) while the designated ports are "downstream" ports, so conf BPDU flow from the root bridge, to the ro

Re: happy independence day

Annlee Hines wrote: > Thank you! It's hard to appreciate what you have until you've lived with > something else for a bit. I hope Nigeria continues to improve...you have so > very much potential. Best wishes. > > Annlee > > ""Oladele Ayuba"" <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED

Re: Happy Independence Day Americans

Hey ! Is my birthday also :-) - Original Message - From: "ABDUL RAZZAQ" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 05, 2000 3:19 AM Subject: Happy Independence Day Americans > To all Americans > > > > happy independence day > > > As a member of NR Nava

Cvoice

I just passed CVOICE today and wanted to let everyone that is planning to take the test, know a couple of things. Since there is no exam objectives here are a few things to consider. Understand the IOS commands to implement all Voice Over Technologies. Also, understand the physical hardware inc

RE: CCNP certification

Right now you can't take foundation, so depending on your timing you will have to take all 4 exams. Other than that, it's up to your exam taking tastes. Do you like longer or shorter exams? There's been plenty of discussion on the subject a while ago, so may want to check the archives. Now as far

Solaris on Intel platform

Hi, Has anyone tried to install Solaris on PC? I want to buy a Solaris 8 media kit form Sun. When I checked the HCL from Sun web site, I found it has strict requirements for hardware, only VGA cards, sound cards..., but also motherboard with CPU, which I have not seen in Linux. Do I need to me

Re: CVOICE EXAM

Exam objectives can be found somewhere on CCO. Sorry, lost the URL and is not easy to find ... but I know it's there. And .. please don't use this HTML crap on mailinglists ;-) Reading your mail as an HTML attachement isn't fun... -- Andreas Klemm http://people.Fre

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

Thanks, Evgeny. My answer had that mask 0.0.0.24, which would only allow specific hosts on a specific subnet. If the original question was to allow any host witha 1,9,17, or 25 in the last octect--but from any subnet--then 255.255.255.24 would be the correct answer. It all depends on how the or

Re: policy routing

There are 2 problems with the route-map. 1. Syntax should be "set ip next-hop serial0" 2. There is no match in the map for 192.168.2.0 so those packets will get dropped. Correct config should be: route-map test permit 10 > match ip address 10 > set ip next-hop interface serial0 > > route-map

Re: CVOICE 2.0 beta exam

I'm one exam (BCSN) away from CCNP Kevin L. Kultgen MCSE+I, MCDBA, CCNA, CNX-A, A+, Network+, i-Net+/CIW IRIS Systems Inc, MCSP Calgary, Alberta - Original Message - From: "Lou Nelson" <[EMAIL PROTECTED]> To: "Kevin L. Kultgen" <[EMAIL PROTECTED]>; ""Dale Cantrell"" <[EMAIL PROTECT

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

Michael, Thanks a lto for mentioning my name, but I've just looked through follow-ups and found out that John Neiberger was the first to give correct answer. RGRDS, EVgeny -- *** Please DO NOT send replies just directly to me, post them to the Newsgroup as well *** ""Michael L.

Happy Independence Day Americans

To all Americans > > happy independence day > As a member of NR Naval Special Warfare (SEAL) Team Two I would like to thank all the people who served this country & gave us freedom. Abdul Razzaq NR Naval Special Warfare (SEAL) Team Two. New Jersey. -- -

Re: Use Async Port

What, debug's are you running on this setup.Could you post what debug's you're running and what the output is.You will need to setup a chat-script and probably a few extra setups in the chat-script.Are the routers timing out for a encapsulation setup or what.Do the LCP's ever come

Wild Card Mask Puzzle SOLUTION!!!!!!

Okay. There have been alot of responses to this. And alot of people wanting the answer. SO, let me mention Evgeny Babanin and Chuck Hwang, since they gave correct responses to the question! Congrats!! Now, I'll everyone's agony... =) The answer is: access-list 10 permit A.B.C.1 255.

Re: Layer 3 VS. Layer 2

>"Rodney Jackson" <[EMAIL PROTECTED]> wrote, >Guys, > >I need some help. Can someone please explain why Layer 3 Switching >is faster than Layer 2 Switching? It seems to me that with L3 the >switch would have to go up three layer instead of two. I may have >whole concept so please explain.

Vlan routing with 802.1q

Hi all, I have a Cat4003 & 3640, i'm trying to configure 802.1q encapsulation on both unit, and use 3640 as the vlan router. Finally, i can make it working, but i hope someone can tell whether i have configure it rightly. my configuration for vlan routing for 1,2 & 3 on 3640 router is like : int

Re: Single ISDN BRI Dial to 3 Sites

What type of interesting traffic are you letting thru on the B-Channels.Maybe you should setup Dialer Profiles and then setup your map-class statements and then setup your access-list / dialer-list to filter out your desired traffic for each Profile. -JEK- Senior Network/Systems Engineer

Re: no prompt

a new 1400??? are you talking about a fddi/cddi switch? if so, you cant use a regular console cable. you need to make a special one (sort of like a null modem cable). check cisco's website for more details. -brad ""tayta"" <[EMAIL PROTECTED]> wrote in message 8jsss3$li1$[EMAIL PROTECTED]">new

happy independence day

I'm in Nigeria but I was really expecting to see a lot of Independence day posts! The same thing that happened to engineers in school (college) is happening to networkers. They get so engulfed by their work and miss out on the rest of the fun.. To all Americans happy independence

Single ISDN BRI Dial to 3 Sites

Hi, AT Hub site I had configure one physical BRI to dial to and receive call from 3 remotes router. So far it is working well, but I discovered if Hub router had initiated call to 2 remote sites, then when there is a traffic to 3rd remote site the router initiated the 3rd call but there is not av

Layer 3 VS. Layer 2

  Guys,   I need some help.  Can someone please explain why Layer 3 Switching is faster than Layer 2 Switching?  It seems to me that with L3 the switch would have to go up three layer instead of two.  I may have whole concept so please explain.

Re: happy independence day

Thank you! It's hard to appreciate what you have until you've lived with something else for a bit. I hope Nigeria continues to improve...you have so very much potential. Best wishes. Annlee ""Oladele Ayuba"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > >

no prompt

just got a new 1400 delivered, i cant get a prompt up , with a console session, anybody care to speculate thanks a mil tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupst

Re: connecting different Autonomous Systems?

>Hi, > >I am repeating my question, since I didn't hear from anybody, so I >assume that I didn't ask it the right way. > >Here it is: If you want to connect AS 100 to AS 300 or multiple >AS's what are different ways that we can do it? We can use BGP. But >I saw this question asking that know

cat 6500 problem

I have 2 Cat 6500's. I can only see mod 1, if I try to switch to any other mod then I get a Pinnacle synch error(see below). I have switched SUP's with another 6500 and I still cannot switch to another MOD. I have a GBIC blade in mod 2 and I have swapped that out with a 48port 10/100 blade, no

Re: Wild Card Mask Puzzle - fun in the sun

access-list 1 permit 0.0.0.1 255.255.255.24 ^_^ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

EPILOG: Checksum Error @ Copy TFTP FLASH

The cause was two bad sticks of FLASH...  Anyone know how to warranty SMART products ???   Thanks !!! Phil - Original Message - From: Circusnuts To: [EMAIL PROTECTED] Sent: Monday, July 03, 2000 12:58 AM Subject: Checksum Error @ Copy TFTP FLASH I am trying

Re: FastEtherchannel using Compaq Servers

You do not need trunking on the ports to get them to work together... it's a channel you need to configure. Since your subject includes FastEtherChannel, I presume you already knew this? But you do not mention it in your message? Sometimes there is a confusion between trunking and channeling. The

Re: BSCN vs. ACRC - BGP focus

http://www.mrtd.net/ you can get BGPSIM here go hurt yourselves heh sheeesh yet another folder in the to do list. Maybe one of you programmer types can compile this into an exe for us kernal impaired folks. Was Tone that said BGP = Bloody Great Pain hehe Oz http://www.mcseco-op.com/Cheap_Ci

Re: Wild Card Mask Puzzle - fun in the sun

x.x.x.1 0.0.0.230 answer would be correct for the PIX firewall (they use reverse wildcard mask - match 1, do_not_care 0) but in router case should not this be x.x.x.1 0.0.0.24? if we put this in binary: (forget about first three bytes ) 8 7 6 5 4 3 2 1 1 - 0 0 0 0 0 0 0 1 9 - 0 0 0 0

Re: Wild Card Mask Puzzle - fun in the sun

I concur. Originally, I got the 0.0.0.24, but someone said something about wildcard vs subnet masking, I did my math and voila! Looks right on paper, but I don't currently have a router to try it on. - Original Message - From: "Nigel Taylor" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>;

Re: DTE/DCE Cable

Try eBay. Bharat <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi everyone, > > Can somebody please advice whre I cna buy Back to Back serial > cable(DTE/DCE)for Cisco rotuers. Any online odering option with good price will > definitely be preffered. > > Tha

Re: CCNA 1 or 2 - LET'S GET REAL!

Agree completely. And maybe if you are asking this question so late - when the CCNA 1.0 (Exam 640-407) is about to be retired by the end of this month - you should actually start preparing for CCNA 2.0 now (640-507). There are no new replies for the second question about resources too - we see

Hyper Terminal for Windows 2000 - the solution

If you are using Windows 2000, the Hilgraeve Hyper Terminal client included in Windows will not show you the previous command when you hit the UP ARROW key. The alternative - CTRL - P - works fine. Solution: Download Hyper Terminal Private Edition, the full blown version of Hyper Terminal from Hi

Re: CCNA 1 or 2 - LET'S GET REAL!

C'mon people!! This exact same question has been asked every single day for 2 months now!! Are you that lazy not to look back through 1 day of archives??? We would cut out nearly half of the traffic on this list if we simply stopped asking... 1) Do I take test 1 or wait for test 2? and 2) I wan

Re: CCNA 1 or 2

hmm, I purchaced the new book from www.chapters.ca and I recieved it two days later, I think you just have to know where to shop :) "Dinesh_Kakkar" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Amarjeet, > > CCNA 2 has been launched on 1st July & t

Re: Wild Card Mask Puzzle - fun in the sun

Well, in light of everyone jumping in there I taught I might do the same. Here what fell out of this simple mind. access-list xx permit x.x.x.1 0.0.0.230 - ask me how I got this? Man, I was thinking now I'm all screwed up... I can't wait to see the answer, could my answer be right... Chuck/

policy routing

Hi guys,   Please see configurations below : ISP A owned 192.168.1.0/24 and ISP B owned 192.168.2.0/24       ISP A    ISP B    | |    | | serial0   serial1      ethernet0 -> using secondary ad

RE: CCNA 1 or 2

Hello Amarjeet, CCNA 2 has been launched on 1st July & the Todd Lamle new book is also published, but the thing is that the book is not available in market. It will be good if you write CCNA 2 only. -Original Message- From: Amarjeet Singh [SMTP:[EMAIL PROTECTED]]

Re: BCMSN What Additional Switches Must One Know

I teach BCMSN and it is quite different to CLSC. It is far less focussed on hardware and there is no ATM or FDDI. Additional stuff you do need to know includes: 1. RSM configuration on the Cat 5500 2. HSRP 3. There tends to be quite a lot on VTP 4. IP Multicasting (IGMP, CGMP, Spase and Dense mode

CCNA 1 or 2

Dear all, I am planning to give my ccna exams, I would like to know whether I should wait for CCNA # 2 to come or give the current exams. Also what is launch date for the CCNA 2 ,any information on the same will be highly appreciated. Thanks in advance Regards _

Re: [FW: Network Professional required in India]

Thanks, for putting this kind of openning on group list. -Original Message- From: Networkspecialist [SMTP:[EMAIL PROTECTED]] Sent: Monday, July 03, 2000 6:14 PM To: [EMAIL PROTECTED]

Re: Solution - Encapsulation problems Cisco/Motorola - Frame Relay

Ooh, that's a good one! From your original post we were all assuming that the Cisco and Motorola gear were directly connected, as the case would have to be for our "fixes" to work. In your case, things are different: the encapsulation is not end-to-end, but only from the Cisco to the cloud, and

Re: Static Routing or Route Maps

Cormac, You are absolutely correct (but Bal [EMAIL PROTECTED] was the first to point this out) Unfortunately I was wrong saying that HSRP can not track link failures (will read documentation more thourouglly:-),(and I 100 % agree with you that to run some kind of routing protocol to your ISP(BGP

Re: Need help

There are some here: http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121 t/121t3/dtpri_ni.htm#xtocid59719 I did not try them myself though ans would be glad to know if this works :-) RGRDS, Evgeny - Original Message - From: "AUX0" <[EMAIL PROTECTED]> To: <[EMAI

DTE/DCE Cable

Hi everyone, Can somebody please advice whre I cna buy Back to Back serial cable(DTE/DCE)for Cisco rotuers. Any online odering option with good price will definitely be preffered. Thanks, Zahid -- Sent through Global Message Exchange - http://www.gmx.net ___

No Subject

Hi everyone, Can somebody please advice whre I cna buy Back to Back serial cable(DTE/DCE)for Cisco rotuers. Any online odering option with good price will definitely be preffered. Thanks, Zahid -- Sent through Global Message Exchange - http://www.gmx.net DCE Cable

Re: TeraTeram

You just have to go to File and then Connection and then select Serial and then what port your internal modem is using; then you just have to run the AT command set for your specific modem.I hope this helps.   -JEK- Senior Network/Systems Engineer CCNA "Henrique Issamu Terada" <[EM

RE: Serial0 is up, line protocol is down!

There can be a lot of reasons for the "Line protocol down" 1. The cable connected from the router may be Bad. 2. The CU is not sending the clock. Check whether all the pins such as DCD, DSR, DTR,RTS,CTS are UP. 3. There should be same config for Keepalive at both the ends. Either no keepali

Re: FastEtherchannel using Compaq Servers

Are the Compaq servers using Tru64 Unix, Linux, or NT. "Lex Luther" <[EMAIL PROTECTED]> wrote in message 8jq8lc$94b$[EMAIL PROTECTED]">news:8jq8lc$94b$[EMAIL PROTECTED]... > Hello Everyone, > One of my students has a compaq server with 2 nics, each configured on the > Cisco 6500 switch. The

New Italian CCNP now on to CCIE . any help ??

Hi all , today i've finished my exams for 1.0 , following my opinions : 1 - CCNA Was the first so we can consider it difficult also because there are many arguments... 2- ACRC Ambigous questions related to the OSPF commands , medium ... 3- CLSC Many arguments but clear questions ,

Re: Clock rate on C1005 synch?

So you've done a < frame-relay intf-type dce > and then tried to do the < clock rate >.Remember that when you go to configure the clock rate that it's 2 words; but in the config it's just one word.Is the wonderful < ? > not helping. -JEK- Senior Network/Systems Engineer CCNA "St

Use Async Port

Actually, I have Cisco Router 3640 which has 16 terminal lines and Cisco Router 2610 which has 2 Low-speed serial(sync/async) network interface(s). I already configure for both router that Cisco 2610 from interface serial async can connect to Cisco 3640 but connection cannot establish. Here I send

Re: how to configure VLAN on 2900 switch

Below is the way to configure a 2900 Series Switch that is running the Enterprise IOS subset for the switch.If there are anything that I've left out with this please reply to this.Thanks. lab-switch#vlan database lab-switch(vlan)#vtp domain < vlan1 > = whatever you want to name you vl

RE: ARP Broadcast

Hi all, Yeah, I do agree with Kent. Hitesh Kent <[EMAIL PROTECTED]> on 07/04/2000 02:36:27 AM Please respond to Kent <[EMAIL PROTECTED]> To: "m. jean stockton" <[EMAIL PROTECTED]>, Cisco man <[EMAIL PROTECTED]>, [EMAIL PROTECTED] cc:(bcc: harora) Subject: RE: ARP Broadcast

RE: Network Professional required in India

Thanks, -Original Message- From: Networkspecialist [SMTP:[EMAIL PROTECTED]] Sent: Monday, July 03, 2000 6:14 PM To: [EMAIL PROTECTED] Subject:Network Professional required in India Importance: High Hello frns,

  1   2   >