Router#conf memory
%Pool pool1 in use, cannot redefine
%Dynamic mapping in use, cannot change
Why can't i excute "conf memory"?
Thanks.
frank
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
xuhaicheng wrote:
>
> 1.how can i verify the all E1 channel from 1 to 31 is available in the as5300
show isdn service
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.co
It is the multicast address for EIGRP
Ruud
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Verzonden: zaterdag 29 juli 2000 16:26
Aan: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Onderwerp: Accesslist/ syslog question?
I have
I don't think that there is a command line interface on the Cat 3000's. I'm
pretty sure that they are entirely menu driven.
""Rick Holden"" <[EMAIL PROTECTED]> wrote in message
006c01bff9ab$c9aac8c0$[EMAIL PROTECTED]">news:006c01bff9ab$c9aac8c0$[EMAIL PROTECTED]...
> Thanks for you help the 1900
I have a Brand new 'TODD Lamles's CCNA Virtual Lab Trainer' In Shop sealed condition .
I can give it at a great price .Contact me at [EMAIL PROTECTED] --
India
manoj Do You Yahoo!?
Kick off your party with Yahoo! Invites.
Hai,
We are using Cisco 2610 router to access internet
from our campus.
We have the following servers
1. Web server
2. Appln server
3. Citrix server for emulating the
appln
We are testing the appln from intranet and internet
.
From intranet it is successful. When we test from
outsi
1 Cisco Catalyst WSX2924M-XL-EN with the following
modules
1 WSX2914-XL-V 4 Port 10/100BaseTx Module
1 WSX2924-Xl-V 4 Port 100baseFx Module
Asking price $1600.00 obo
1 Cisco Catalyst WSX2924M-XL-EN with the following
modules
1 WSX2924-XL-V 2 Port 100BaseFx Module
Asking price $1350.00
Also
Larry,
What was your Cisco knowledge/experience before you embarked on your
study programme?
Regards,
Ben
--- Lawrence Dwyer <[EMAIL PROTECTED]> wrote: > Sabeen,
> I studied 2/3 of the nights for 3 months. I bought the most
> recommended books,
> subscribed to Certificationzone, and went throu
Karen,
Did some searching and found this...
http://www.cisco.com/warp/public/473/12.html
It looks like the rules are simple for switched ports to desktops:-
1) Enable portfast
2) Disable trunking (DTP)
3) Disable port-channelling (PAgP)
You might want to check out PortFast BPDU Guard - it loo
You need the code from the bottom of the email or from the flyer to get the
book. What is the code?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Russ Kreigh
Sent: Monday, July 31, 2000 11:48 AM
To: Dick Silva; Ed Farmer; [EMAIL PROTECTED]
Subject: RE:
An old question, but one which I don't believe anyone answered. Speculative
question. Serves as a lesson in router behavior.
The question: can one, using ip unnumbered, configure several interfaces on
the same network?
Readers can read through the previous messages to get the idea of what was
dis
frank wrote:
>
> The following is cut from a CCNA book:
> "FragmentFree is a modified form of cut-through switching ,in which
> the switch waits for the collision window (64 bytes) to pass before
> forwarding. If a packet has an error ,it almost always occurs
> within the first 64 bytes."
>
>
Henrique Issamu Terada wrote:
>
> clear ip nat translations
> after that, you're able to change the configuration
On a production network, with NAT overload, that may not be sufficient.
In the worst case, connect over the physical console, shutdown your
interfaces, remove any ip nat static defi
hello,guy
i have 2 problem
1.how can i verify the all E1 channel from 1 to 31 is available in the as5300
2.how can i cut the line after a guy login who is authenticated by radius
exceed sometime
__
=
hey no big deal look at it as $100 invested into the future ..
No one said the tests will be easy ( sure few have but many know better)
What's the big rush if you pass this week next week or in 10 weeks what
is the most important fact about passing.. ?
Some silly letters after your name or
Thanks, I see one now!
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jon,
Try the CS-508 (8-port) or CS-516 (16-port). I think there's an even older
something (ASM?) too. You should be able to get the CS-508/516 for $200-300
on Ebay... a lot cheaper than a 2509. Problem is its not flash upgradable
and the software is pretty old (think 10.x is the last availabl
S-E Us you will have to put in any where from 55 to 70 hrs weeks an hour.
This may or may not include on-call schedule. However, the work week is 40
Hrs.
"Hubert Pun" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What is the normal working hour per week in e
Chuck,
I'd say go for the VPN/PIX... and the LocalDirector too. You might want to
check out the Cisco/ArrowPoint products, VPN 3000, 7100 series too.
Aironet shouldn't give most people much trouble... though I haven't touched
these. Have used both the Lucent's Orinoco and Jaguar's Waveaccess
Hi Sammi!
That depends on what you want to use it for.
I've not seen any Netgear stuff beyond hubs.
If it doesn't use the Cisco IOS then you may be better off a Routersim.
It has several routers and switches to play with and interconnect.
http://www.routersim.com/
Sammi wrote:
>
> Will a 128k IS
The following is cut from a CCNA book:
"FragmentFree is a modified form of cut-through switching ,in which
the switch waits for the collision window (64 bytes) to pass before
forwarding.
If a packet has an error ,it almost always occurs within the first 64
bytes."
I want to know how the last sen
Well... the item I ended up getting to save some bucks, and frankly other
than lacking sync serial ports I am much happier with it in instead of a
2509/2511. It a CS-516. It runs 10.3 IOS, has 16 async ports and for all my
reverse-telnet needs it meets them.
You will find them on Ebay from time t
Hi, there,
Where can I find some sample questions or test for Campus ATM exam?
Thanks a lot.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and N
Hey all- I've been
spending more time in with the lab lately & I have noticed a lot on
intermittent latency in the Token Ring section. I heard there is an
internal soldered battery, that has the potential of going bad. Could this
be the issue ??? The cables are fairly new & the router int
Hi, Dear all,
Q1
When I was doing the WAN monitoring. I found the link between Router A and B
is down. I checked the
router A
interface is up and protocol is down
modem status is DCD=up DSR=up DTR=up RTS=up CTS=up
but at the router B,
the interface is down and protocol is down,
the mo
In a message dated 7/31/00 8:50:31 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< What is the normal working hour per week in each country? >>
US: 400 hours on a slow week
Mark Zabludovsky ~ CCNA, CCDA
[EMAIL PROTECTED]
If the automobile had followed the same development as the c
geesh. it has been said over and over that the
wealth of information on CCO is just about boundless.
Here are enough links to keep you up nights for a
long time.
Taken from the CCIE Design page:
http://www.cisco.com/warp/public/625/ccie/certifications/design_blueprint.html
Kevin
Could someone tell me which "older" router will fill the place of a 2509 for
dial-in or internet connection access to my lab. The AGS maybe? I would
like to be able to connect to the console ports of at least 6 devices.
Thanks
Jon
___
UPDATED Posting Guidelin
ISBN 0-13-082537-9
Cisco Certification
Bridges, Routers and Switches for CCIEs
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure viola
NAT the whole company and only use the public addresses for public servers
> > I was reading an article the other day for CCDA, and it raised the
following
> > question -
> >
> > You support a network getting close to using their complete range of ip
> > addresses. They need to add another 30 co
Sorry I didn't read the whole message
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I am trying to distinguish whether a spanning tree explorer packet is a
broadcast packet, while an all routes explorer packet is an multicast
packet.
Am I correct?
Thanks...
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list arch
You pretty much have it there... after the copy tftp flash you will be
prompted for the TFTP server info, and file name to copy and it's desination
name.
Now rather you are going to have more than one image in flash complicates
things a little. You will be asked if you want to erase the current f
Take ip nat inside off of the incoming interface to stop dynamic
translations from occurring. Then issues a clear ip nat translations * to
remove the current translations. You should then be able to make all of
your changes.
Regards,
Aaron K. Dixon
-Original Message-
From: [EMAIL PROTE
Hopefully this won't cause a huge thread, but my company (a reseller)
naturally want's to sell everything Cisco makes, so I'm being asked to learn
the Aironet wireless, VPNs and firewall, and IP telephony. This is all in
addition to my current pursuit of the R&S CCIE. Since it's pretty hard to
b
Sorry, no you can't. I thought the same thing at first. I thought that if a
router has two serial ports and can emulate a frame switch, then naturally
if I bought a Cisco 4000 with an eight port ISDN module, that I could use it
as an ISDN switch, but no dice. You need either an ISDN simulator such
clear ip nat translations
after that, you're able to change the configuration
Henrique Issamu Terada
CPM Comunicacoes Ltda.
Technical Support - CCNA Certified
- Mensagem original -
De: Niraj Palikhey [SMTP:[EMAIL PROTECTED]]
Enviada em: segunda-feira, 31 de j
I'd like to add a couple of points that possibly have been overlooked.
The first one is that I don't believe I've seen Brad 'spam' the list for sales.
He only ever seems to reply to people who have posted looking for equipment to
study on.
Secondly, isn't that the point of this list as well?
To
Yes there is a command line for the 1900 enterprise edition switches. The
newest code I believe is 9.0.1. It is IOS based. The Cat 3000s are only menu
driven.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Donald B Johnson Jr
Sent: Monday, July 31, 2000
Forget it. Like the snowball if you know what I mean. The BCMSN is totally
different than CLSC. I recommend you get Kennedy Clark's Cisco LAN
Switching, the BCMSN cisco press book and for Multicasting "Cisco Multicast
Routing and Switching" by Parkhurst - McGraw Hill.
-Original Message-
F
Try SiteScope from FreshWater software. It can do much more, is web-enabled,
monitors a lot more stuff, it's really small and efficient.
Bharat Suneja
""Nasser N Khwaja"" <[EMAIL PROTECTED]> wrote in message
8m3u88$auo$[EMAIL PROTECTED]">news:8m3u88$auo$[EMAIL PROTECTED]...
> Hello Everybody,
>
I have a 1912EN
When I telnet in I get:
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1998
All rights reserved.
Enterprise Edition Software
Ethernet Address: 00-D0-06-81-24-40
PCA Number:73-3122-03
PCA Serial Number: FAB03203536
Model Number:
Go to https://www.galton.com/~cisco_s/setpin.html and enter all the
information from your Sylvan Test Result - it asks for your Sylvan Prometric
ID, Registration Number, Exam (640-407, I suppose), Date, Site Number &
Grade (PASS).
That will create your account and then you can go in and sign the
Hi,
We have a cisco 1720 router that needs the IOS upgraded to 12.1 and
currently has 12.0. Could someone give me a quick run down on the commands
that are needed as I only have a brief idea how it is done.
eg:
copy tftp flash
conf t
boot system flash 12.1.watever
reload ?
Thanks for not f
What is the normal working hour per week in each country?
and what is the normal working hour per week for NETWORK ENGINEER have
to work per week?
I just want to know roughtly what to expect
Thanks
Hubert
___
UPDATED Posting Guidelines: http://www.groupstudy.c
.. and I just realized - you really haven't re-scheduled 407 in a week
and a half because today is the last day for the test.
You may be booked (probably) for the 507 - CCNA 2.0 - which by all accounts
is much different.
You may want to think twice and find out what's different before takin
I missed it also, and that puts us both in the same boat.
The 407 was CCNA 1 and now we have to study for the 507 or CCNA 2.
Not exactly sure what the differences are but from what I understand
it's more into VLANs.
For router practice go to http://www.r1r2.com
Currently, the router labs are free.
Hi
I'm back...I just came back from the bookstore with Odoms 507 study guide and
Lammles 507 study guide...I did kind of feel that I did not really know the
information in "in-depth" enough...which is why I only scored mediocre at
best. [EMAIL PROTECTED] and kevin..thanks for the info and enco
Nicely done vlan!! Very, very motivational (what do you do for a living?
hehehe)
At 04:26 PM 7/31/00 -0700, you wrote:
>Al,
>
>You are now in a very powerful position, you HAVE ALREADY SEEN THE TEST!
>This is practically legalized cheating! I and many others have taken
>tests we knew we could
Hi:
Which site should I go to in order to sign up for cisco's IP address Bets
exam.
Thanks,
John.
- Original Message -
From: J K <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 31, 2000 7:51 PM
Subject: Free Cisco IP Telephony Beta EXAM
> I signed up for this beta thr
No. You also need an ISDN simulator.
""Jose Flavio Ribeiro"" <[EMAIL PROTECTED]> wrote in message
8m4tuv$mv3$[EMAIL PROTECTED]">news:8m4tuv$mv3$[EMAIL PROTECTED]...
> Hi there,
>
> I'm about to buy 2 cisco routers: a 766 and a 802. Trying to set up a home
> lab. Is it possible to connect these 2
Not getting "personal" here but you do have some pretty low scores in
there.
Only you know how much self study you put in, at this point I would only
ask - how did you verify that what you studied matched the requirements?
There could be discussions galore on "practice" exams but I think the
On Tue, 1 Aug 2000, Swart, Douwe wrote:
> These are internal addresses only, and don't need access to the Internet.
> Just need the addresses for new machines.
Your scenario indicated "running out" of addresses, indicating that
the present pool was exhausted. NAT with overload is a way to get
You can go to www.galton.com/~cisco.
Good luck.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTE
Dear Group,
While surfin' around looking for the CCIE exam
stuff I bumped into this link.
http://www.cisco.com/warp/public/625/ccie/certifications/routing.html
At the bottom are links to kinds of stuff that is
routinely asked about on the list from ATM to Voice.
Kevin Wigle
CCDP/CCNP..
These are internal addresses only, and don't need access to the Internet.
Just need the addresses for new machines.
Douwe Swart
Network Administrator
Traveland Pty Ltd
Ph: (02) 9552 9260
Fax: (02) 9552 9356
-Original Message-
From: Jay Hennigan [mailt
Al,
You are now in a very powerful position, you HAVE ALREADY SEEN THE TEST!
This is practically legalized cheating! I and many others have taken tests
we knew we couldn't pass because we wanted a "sneak peak".
Here's a tip: don't memorize, know it like you invented it. In your books,
read
Ok, try this..
1. Even though you removed the NAT statements from the interfaces, there
are still translations in the router. Do a "show ip nat translation" to
see if there are any. If there are, the issue the command "clear ip nat
translation" to remove them. After you remove them, you sh
On Tue, 1 Aug 2000, Swart, Douwe wrote:
> I was reading an article the other day for CCDA, and it raised the following
> question -
>
> You support a network getting close to using their complete range of ip
> addresses. They need to add another 30 computers and hence IP addresses.
> They do no
LOL - Thanks...
I'll model it for you all some time next year, or perhaps the year after...
:-)
- Dennis
-Original Message-
From: Natasha [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 31, 2000 4:06 PM
To: Dennis Laganiere
Cc: '[EMAIL PROTECTED]'
Subject: Re: Stupid Quest
Unfortunately, you don't seem to be strong in any one area. I'd suggest
rescheduling it approx 4 weeks away and hit it all over again.
Roman
At 06:17 PM 7/31/00 -0400, you wrote:
>Hello...
>
>Despite many hours of self study and memorization I failed the 407...wasn't
>even close..
>I scored 617
I used only the Sybex book and passed the CCNA with a 944. On the CCDA I
again used only the Sybex book and passed with a 834. Those books seem to
work for me so I'm going to stick with them. I've heard that other's who
posted here don't care for the Sybex books and swear by Cisco Press. I
gue
/
This dog has clicked and sniffed everything and every page on that site.
No quiz, no biscuit.
\
-Original Message-
From: Russ Kreigh <[EMAIL PROTECTED]>
To: Dick Silva <[EMAIL PROTECTED]>; Ed Farmer <[EMAIL PROTECTED]>;
[EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, July 31, 2000 4:
Try disabling the interface, then remove it.
At 04:44 PM 7/31/00 -0400, you wrote:
>Hi,
>I have enable dynamic nat on a 2501 and cannot take it out. It gives me an
>error msg. "Pool Internet in use;Cannot redefine". "Dynamic mapping in
>use. Cannot remove"
>
>Basically, instead of specifying
Study:
OSI, WAN, IOS, NET Protocols, Routing, Security and LAN Switch a bit closer
and harder. Perhaps you should invest some money in an ICND course. That
course and the reading materials most certainly helped me.
Just Try Harder
mjs
> -Original Message-
> From: [EMAIL PROTECTED]
I checked the two authoritative sources of which I am aware, and neither one
listed TCP nor UDP port 2039 as registered.
Older sources generally refer researchers to RFC 1700, which is dated 1994.
A while back I inquired of the IETF if there were a more recent document.
They pointed me to IANA, w
How about Seattle WA ?
"Jim Bond" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I'm so tired of working 60-70 hours a week; I'm so
> tried of paying $3,500 mortgage per month for a 1,300
> sqf home; I'm so tired of driving on that crowed
> highway
I was reading an article the other day for CCDA, and it raised the following
question -
You support a network getting close to using their complete range of ip
addresses. They need to add another 30 computers and hence IP addresses.
They do not have 30 IP addresses. How would you configure this
Don't think so, would you need something that simulates an ISDN switch between them.
On Mon, 31 July 2000, "Jose Flavio Ribeiro" wrote:
>
> Hi there,
>
> I'm about to buy 2 cisco routers: a 766 and a 802. Trying to set up a home
> lab. Is it possible to connect these 2 routers via a back-to-ba
Might just want to mosey on over to www.mentortech.com and check out their
seminars section.
Mentortech is highly reputable, and their seminars, so I am told, are first
rate ( I will be attending my first in another month )
I'm not sure why your mail came in as an attachment. My own had just the
Hello...
Despite many hours of self study and memorization I failed the 407...wasn't
even close..
I scored 617.
71% OSI
14 WAN
42 IOS
60 Net Protocols
33 Routing
20 Security
57 LAN Switch
0Cisco Career Certs (does this have anything to do with the score?)
0Cisco Career Cers A
Hi there,
I'm about to buy 2 cisco routers: a 766 and a 802. Trying to set up a home
lab. Is it possible to connect these 2 routers via a back-to-back ISDN
cable?
Thanks in advance,
Flavio
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.ht
CPS from nortell
Duck
- Original Message -
From: Carlos Patriawan <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 31, 2000 6:48 AM
Subject: IP Address Management Software
> Hi Guys,
>
> Is there any "good" IP Address Management Software for
> very large-scale ISPs and c
This is a truly stupid question, and I'm s looking forward to getting
flamed, but.
A friend and I were talking about the CCIE and I mentioned that you use to
get a Cisco leather jacket when you finally passed the CCIE lab. Do they
still do that, or I just having some kind of reaction to
An access list should do the trick
Duck
- Original Message -
From: Saeed Siddiqui <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 31, 2000 4:11 AM
Subject: Workgroup across VLANs
> Hi Group
>
> I have created 6 VLANs at a customer sites using 5505 ans RSM. Routing
> across
It work for me.
>From: "Dick Silva" <[EMAIL PROTECTED]>
>Reply-To: "Dick Silva" <[EMAIL PROTECTED]>
>To: "Ed Farmer" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
>Subject: Re: Cisco Free Book: IP Telephony
>Date: Mon, 31 Jul 2000 13:43:23 -0400
>
>/
>It may be free if you can complete the quiz. Ho
Hi Dennis.
netbios-ssn 139/tcpNETBIOS Session Service
netbios-ssn 139/udpNETBIOS Session Service
About port 2039 I'm not sure, but you can verify at
http://www.antioffline.com/TID/assignments/port-numbers .
Cheers,
Wenderson Duarte
"Dennis Ighomereho" <[EMAIL PROTECTED]>
The following quote is verbatim from:
http://www.cisco.com/warp/public/625/ccie/ccie_program/policies.html#3
Written Exam Expiry
Candidates must attempt the CCIE Lab exam within one year of passing the
CCIE Qualification exam. As long as a candidate attempts the CCIE Lab at
least once every 12 m
Only the last 23 or least significant bits are transformed to the mac.
Corect answer is 01-00-5e-40-ff-2d
Lets look at how I got 40 out of the 192 part of the
first listing.
192 in binary is 1100
^
The best a most have for CCIE candidates
Duck
- Original Message -
From: Cisco <[EMAIL PROTECTED]>
To: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Sent: Sunday, July 30, 2000 4:50 PM
Subject: Book Review
> Any comments on this book?
> Cisco Certification: Bridges, Routers and Switches for C
We use WhatsUp Gold. For the paging we use pagers that can accept
alphanumeric email pages (like Arch).
On Mon, 31 Jul 2000, Nasser N Khwaja wrote:
> Hello Everybody,
> Does anyone know about any software package that monitors a network so that
> if any router(s) goes down the support Engine
Port 139 is the netbios session service. This can be dangerous. In most
instances (if you ask ne1 who attended SANS they would say ALL) you should
block this from external networks on your router as Windows will accept
anonymous connections to this port.
I do not know a well known app for 2039.
Funny you should mention. I am starting a new job in Old Alexandria on
August 15. Moving from Jersey. I am a little nervous as I have been with the
company I am leaving for 5 years, but there seems to be so much going on in
the Alexandria/Reston/Arlington area in the way of tech.
Speaking of the
I have used CNR what is your question
Duck
- Original Message -
From: Muralidhar A. <[EMAIL PROTECTED]>
To: cisco freinds <[EMAIL PROTECTED]>
Sent: Sunday, July 30, 2000 4:57 AM
Subject: CNR
> Hi
>
> Has anyone worked with CNR 3.5... i need to place a soultion on this..
could
> anyone gi
Hey Groupies,
Well my hell has finally cooled down. I passed the CCDA this morning with
an OK score of 815/1000. Let me say a couple of things: I hated this test!
Not because it was hard but because of all the damn reading I had to do. I've
read posts where people say that it's made up of a
How can I see the IP addresses conected in every FastEthernet Port ?
Something like that
FE0/010.50.69.35
FE0/110.63.98.14
FE0/210.23.10.1
And so on ...
Thanks
Javier from Argentina
___
UPDATED Posting Guidelines: http://www.g
The ip redirects will stop icmp redirects that your router will perform.
The ip directed-broadcast will stop passing broadcasts as unicast. There are
about 6 or 7 ports passe.
The ip proxy-arp will stop the router from routing for a host that doesn't
have a gateway configured.
Duck
- Original
You're studying for the wrong exam... the coarse material changed quite a
bit from CLSC to BCMSN. You're better off picking up the Cisco Press
BCMSN book and study that.
Paul
On 31 Jul 2000, Dele Ajayi wrote:
> Hi guys,
> I'm preparing to take the BCMSN exam by Friday and I've been using the
I believe that there is only enu baed on 1900
could be wrong there may be set commands
DUCK
- Original Message -
From: Rick Holden <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 28, 2000 5:12 PM
Subject: Catalyst menu and command line
> I have a Catalyst 3000 and a Cataly
CCIE written gives you the right to take the lab. Anyone who regurgitates
the exam cram on the actual written will get a VERY rude awakening on the
actual lab. There is no certificatoin given for CCIE written.. not much to
brag about there..
Russ..
""J K"" <[EMAIL PROTECTED]> wrote in message
[E
Why dont you put up a case study and ask some questions and I
bet a good string will start.
I agree with you their should be more technical info and less
personal study questions.
People should just read the string and most of the questions
will be answered.
Duck
- Original Message --
Title: RE: CCIE written expire after one year?
On CCO at:
www.cisco.com/warp/public/625/ccie/ccie_program/policies.html
Policies for Candidates attempting CCIE lab exam.
#3 - Written Exam Expiry
Candidates must attempt the CCIE Lab exam within one year of passing the CCIE
Qualification
CiscoWorks 5.0 now includes IpSwich WhatsUp 4.05
http://www.cisco.com/warp/public/cc/pd/wr2k/wrwi/
Jon
"William E Gragido" <[EMAIL PROTECTED]> wrote in message
000901bffb0e$5fd0da20$[EMAIL PROTECTED]">news:000901bffb0e$5fd0da20$[EMAIL PROTECTED]...
> I've worked with this product and I thought
Hi,
I have enable dynamic nat on a 2501 and cannot take it out. It gives me an
error msg. "Pool Internet in use;Cannot redefine". "Dynamic mapping in use.
Cannot remove"
Basically, instead of specifying a legal range of addresses for the pool, I
specified the internet addresses 10.11.10.2 thr
Let me ask a quick security survey question.
How many people on this list would open an unsolicited
e-mail attachment from somebody with an AOL address?
I'd love to know more about a free seminar in Houston,
but unfortuneately I'm not going to open the attachment.
-Original Message-
Fro
I didn't fair very well on BCMSN. Two questions that I though I got right but were
marked wrong were on Multicast IP address:
224.192.255.45 = My answer was 01-00-5E-C0-FF-2D and
224.163.163.45 = My answer was 01-00-5E-A3-A3-2D
Both were marked wrong on the test. What did I do wrong?
Re
http://www3.mwc.edu/~jhaynes/cisco.htm
and at home www.ciscoinanutshell.com
Please send me more of what you find out
>From: "Vijay" <[EMAIL PROTECTED]>
>Reply-To: "Vijay" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: Curious
>Date: Mon, 31 Jul 2000 22:56:43 +0300
>
>Hello Everybody,
Just trying to share some info I was turned on to. Since most of us are
dealing with VOIP and have very little time or experience with it. Did not
know it would save the email as an attachment.
Mentor Tech News - http://www.mentortech.com
Mentor Technologies, formerly Chesapeake Network Solu
You guys are too sweet! :) Thx!
I'll be posting another kit here in a few days. Im still trying to put
together a nice package for you CCIE goers. Ive got a few extra 2520's if
anyone needs a frame switch.
Marc Russell's Rack #3 should have ATM in about 10-12 days. I'll post
something here w
This disgusts me . How can someone put a 32.00 price on a book that helps
people pass the ccie written . exam cram
Why would anyone want to use this to pass you obviously can't purchase the
exam cram CCIE lab for 25.00 ..
And you wonder why the value of certs diminishes after a few years
1 - 100 of 199 matches
Mail list logo