Hi all,
Busy cramming away here for my exam on Friday morning. Anyone have any
pointers
From the Cisco exam outline webpage there is no mention on AppleTalk and SNA
- that bothers me a little as I really expected this
I realise that this is a badly worded exam - can't really be worse
Have anyone installed the Cisco GBIC ZX (WS-G5487)?
We have the 12km singlemode fiber optic link between 2 site and we use 02
Cisco 2950G-24 with 02 GBIC ZX. The end-to-end link attenuation was 7dB.
The question is: we must use the additional attenuator? If yes, what kind of
it we must choose?.
Haven't had my coffee yet ...
*) couldn't you just be more explicit/specific in your ACLs when specifying
interesting/matching traffic? ... IOW, don't summarize the whole range :)
(or - to go a step further, could you do the summarization but precede it
with a deny that specifies the other
Dear All,
Could anyone advice below error msg, I have test the cable seem to be ok?
Thanks...
01:47:36: %LANCE-3-BADCABLE: Unit 0, Transmits stalled. Check ethernet cable
connection
Rgds,
Steiven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51347t=51347
Folks, Just a quick question.
I need to come up the below config.
site 1 - PTP T3 to ISP and 2 PTP T3s to two other sites
site 2 - PTP T3 to another ISP and 1 PTP T3 to site 1
site 3 - PTP T3 to site 1.
Trying to figure out what the best router is to use. All I require on LAN
side is 100mb
thankyou for your patience!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51348t=51348
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
I think your argument makes a lot of sense.
Turpin, Mark wrote:
I can understand your disagreement. But I hope you will
understand that
its semantics at this point. A flow by any other name is still
a flow.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51350t=51272
If you have a cco account you can try
http://www.cisco.com/cgi-bin/Support/Errordecoder/error_decoder.pl?index=ios
query=+%25ALIGN-3-TRACE%3A+-Traceback%3D+601D044C+6033D758+602F3018+000
0counter=0paging=5links=referencesa=Submit
1. %LANCE-3-BADCABLE: Unit [dec], Transmits stalled. Check
Cisco's answer:
'
The Ethernet cable is not connected.
Recommended Action: Check the Ethernet cable connection.
'
HTH,
Mark.
-Original Message-
From: Steiven Poh-(Jaring MailBox) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 14 August 2002 21:15
To: [EMAIL PROTECTED]
Subject: Router
In case you use the VPN Client, and missed the bulletin ...
Thanks!
TJ
-Original Message-
From: CCO Field Notice [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 13, 2002 1:48 PM
To: [EMAIL PROTECTED]
Subject: Cisco Security Advisory: Cisco VPN Client Multiple Vulnerabilities
This
Hi all,
What command can I use to find out how many prefixes I am advertising via
bgp?
Thanks in advance
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51354t=51354
--
FAQ, list archives, and subscription info:
Here it is.
We have a Cisco PIX 525. The Novell 4.83 user/client is behind the
firewall. The Novell Netware 5.1 server is outside the firewall. What do
I need to do to make the client be able to sign into the server? We have
it configured so that anyone in the inside can do any ip to the
It is possible to spoof one's AS per neighbor or peer group much like one
controls the source address using the local-as command.Running multiple
BGP processes in a non VR enabled router is not possible, nor usually
desirable. What are you trying to accomplish?
Here is a link that
I would try ROADRUNNER and see if they provide service in that area... I
know they service the Upstate NY area with Cable Modem service farther east
and north in the Syracuse and Watertown areas... They are affiliated with
Time Warner...
Message Posted at:
John,
Keep in mind that Pure IP NW uses multicasts as part of SLP to map
server names to IP addresses and build a table. The PIX won't pass
multicasts. I assume you're manually putting in the server IP address into
the client. Otherwise you'll need a directory agent. Or replace it
sh ip bgp neighbors x.x.x.x advertised-routes
- Original Message -
From: So PaulDong
To:
Sent: Wednesday, August 14, 2002 4:05 PM
Subject: bgp prefix number [7:51354]
Hi all,
What command can I use to find out how many prefixes I am advertising via
bgp?
Thanks in advance
That was my point exactly. Novell continues to improve there products to
work with any OS...Microsoft, Apple, Unix, Linux and PDAs. Granted they
were behind on the Internet front, but they've may great strives to catch up
and make there products Internet ready out of the box.
Donald R. Queen
Dear Buddies,
Has anybody here, ever attended a presales training or a presales exam, I
know Cisco has a bunch of them .
But not sure of who should be acquiring that.
Just a Query.
--
Shaikh Raees Ahmed,
System Network Engineer,
Message Posted at:
sh bgp nei x.x.x.x advertised-routes
Dave
So PaulDong wrote:
Hi all,
What command can I use to find out how many prefixes I am advertising via
bgp?
Thanks in advance
Paul
--
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
You don't make the poor
Exchange 2000 has IM built in. You don't need a seperate server to do this.
- Original Message -
From: Dan Penn
To:
Sent: Saturday, July 27, 2002 11:36 AM
Subject: RE: access-list for steaming audio [7:49817]
What I really like is some corporations embracing instant messaging for
He may need to encapsulate the IPX into TCP/IP. Cisco only supports IP
on the VPN3000 concentrator. Maybe a good test question for us taking
the CSS1 exams. The VPN 5000 will support IPX.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51365t=51303
I have a 3620 with the following flash configuration;
8192K bytes of processor board System flash (Read/Write)
8192K bytes of processor board PCMCIA Slot0 flash (Read/Write)
8192K bytes of processor board PCMCIA Slot1 flash (Read/Write)
Can I combine the two PCMCIA slots into 1 partition so
Is look at the traffic and figure out what it is and if it's necessary. 3
mbs is some serious bandwidth for one spoke site. Is it database lookups on
some apps? Perhaps it makes sense to put a database in the remote site and
synchronize. Voice/video traffic? make sure your QoS infrastructure
If you believe any of this, you can spend $1.50 and own some of the
Novell Company (stock market). About the cost of a candy bar? My
experience with Novell you need to spend a lot of effort to get anything
to work, and there support is non-existant. I have heard of even
hardcore Novell shops
Ken,
If memory serves, I dont think you can combine the PCMCIA flash (I could be
wrong, it's been a while). I think you'll either
a) need to get a 16MB PCMCIA card
or
b) get another 8mb double-sided flash for the system board (assuming you
have a single 8mb double-sided flash in there already)
Hi all,
I was trying to setup this network in fig 12-9. I got stuck in one
particular route. I am not able to view the route 172.16.10.0/24 on the
router peter which is running RIP and got to see this route as
redistributed one.
The question is in which router do I need to give the area
No
Dave
Ken Corkins wrote:
I have a 3620 with the following flash configuration;
8192K bytes of processor board System flash (Read/Write)
8192K bytes of processor board PCMCIA Slot0 flash (Read/Write)
8192K bytes of processor board PCMCIA Slot1 flash (Read/Write)
Can I combine the
Does anyone, by any chance, still have a copy of the CCNP 50x exam
objectives? I would like to make a line-by-line comparison of those to the
CCNP 60x exam objectives.
Thanks,
Karl.
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51370t=51370
Rajesh,
It sounds like you have an ASBR on your hand. You should probably use
summary-address 172.16.10.0 255.255.255.0 instead. Give it a try.
K.T.
Rajesh Kumar wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
I was trying to setup this network in fig 12-9. I got
Usually I would suggest to look in your 50x books, they usually have
outlines there. Here is a link that has 50x if you look. I think they
still use the 50x for the foundation.
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_
exams/640-509.html
-Original
If you have not figured out how to get the 506, it is here. I simply
replaced 503, with 506.
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_
exams/640-506.html
-Original Message-
From: Karl Thrasher [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 14, 2002
Brian Zeitz wrote:
He may need to encapsulate the IPX into TCP/IP. Cisco only
supports IP
on the VPN3000 concentrator. Maybe a good test question for us
taking
the CSS1 exams. The VPN 5000 will support IPX.
It might be a good design question to see if the test-taker can analyze user
Anyone taking any interest in this? Does anyone even use any of the Cisco
optical products?
PAD
PAD
PAD
http://www.cisco.com/warp/public/10/wwtraining/whats_new/
http://www.cisco.com/warp/public/10/wwtraining/certprog/cqs/optical/
Has anyone taken the new CCIE written exam (started August 7th) I was
wondering what the differences were over the previous exam.
mike
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51378t=51378
--
FAQ, list archives, and
We have done some testing through this same concentrator. If you do not have
SLP implemented on your NW5.x environment, you need to put the IP address of
your logon server in the preferred server filed of the client. Your client
need to be set up for IP/IPX or just IP for this to work. IP only
Jeff Doyle is allowed to ask questions too. ;-)
Serisouly, what was the gist of the responses? Are NANOG types concerned
about routing protocol security vulnerabilities? I know that that there's a
lot of academic work going on in this area. If you search on routing
protocol security in Google,
I'm preparing for the Cisco IP Telephony Support Specialist exams in parallel
with the CCIE written, as there is an overlap of topics such as Diffserv, QoS
and multiservice. The three telephony support exams are:
* 9E0-402 Cisco IP Telephony (CIPT)
Coursebook: Cisco IP Telephony
* 9E0-423
My point about the VPN concentrator was in a different email. I was
mentioning the VPN concentrator for those taking the CSVPN test for the
CSS1. Maybe I should have changed the heading, to make it politically
correct. I am sure people going for the VPN test will appreciate this if
they see it on
Which concentrator are you referring to? The 3000? Cisco says the 3000
doesn't support IPX.
-Original Message-
From: Christopher Dumais [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 14, 2002 2:03 PM
To: [EMAIL PROTECTED]
Subject: RE: Cisco PIX Novell [7:51303]
We have done some
Yes, and No. I would be very interested in optical switching, but the
cert I am not sure of. I would be interested in taking some free beta
exams for this maybe. I have also asked Cisco press for a book on
optical networking, and content switching. I am more concerned about
learning the material
throwing money is the obvious and easy thing to do. OTOH, lots of businesses
seem to have extra money, recession of no. Besides, what do you expect as a
solution from the telcos? ;-
A comment of two below
--
coming soon:
www.chuckslongroad.info
Chris Charlebois wrote in message
[EMAIL
Thanks. I was afraid of that.
Brad Ellis wrote:
Ken,
If memory serves, I dont think you can combine the PCMCIA flash
(I could be
wrong, it's been a while). I think you'll either
a) need to get a 16MB PCMCIA card
or
b) get another 8mb double-sided flash for the system board
All, am I reading this right? Does this state that there is 8MB Flash and
2MB of DRAM? If so, what do I need to do to get it to the latest version of
IOS that Cisco uses for the tests? Help would be more than appreciated!
cisco 2500 (68030) processor (revision L) with 2048K/2048K bytes of
Brian Zeitz wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I want to learn optical switching, and keep on top of it. I looked at
other optical switching books, but I am not sure which ones relate to
Cisco. Can anyone recommend a good thick optical switching book that
would be
you need another 8mb flash stick, and a 16mb dram. try e-bay. you may need
to upgade your bootroms too search the archives for info.
Robert D. Cluett wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
All, am I reading this right? Does this state that there is 8MB Flash and
Tom,
I am doing the same thing for the same reason you are. I am currently
preparing for DQoS and I am using the IP Quality of Service book. It seems
to cover everything, but in my opinion is a bit jumbled. Vegesna covers some
topics seemingly out of order and assumes some knowledge of concepts
You're nearly right ...
Your router has 8 MB of FLASH but 4 MB of DRAM (2 MB are used for main
memory and 2 MB for I/O shared memory) - maybe a 2 MB SIMM and 2 MB of
onboard DRAM.
Please check this link for more details :
http://www.cisco.com/warp/public/63/arch_2500_5750.shtml
Hope it helps.
Hi, there.
What is the lowest model of Cisco Switch that could support MAC ACL?
Thanks.
Leo Song
System Engineer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51393t=51393
--
FAQ, list archives, and subscription info:
sh ip bgp neighbors
RR_LDCOM#sh ip bgp neighbors
BGP neighbor is 10.0.0.1, remote AS 254, external link
(...)
For address family: IPv4 Unicast
BGP table version 6, neighbor version 0
Index 1, Offset 0, Mask 0x2
0 accepted prefixes consume 0 bytes
- Prefix
Sorry if I was not clear. The concentrator only supports IP. The client
setting of IP/IPX uses IP if IPX is not available. That is why the IP only
client works faster, it does not have to wait for any IPX timeouts.
Chris Dumais, CCNP, CNA
Sr. Network Administrator
NSS Customer and Desktop
Cool, I am thinking I will grab some from Kg2.com, but just want to make
sure I get what I need. So I can add (1) 8MB flash simm and (1) 16MB DRAM
Simm? Tell me more about the boot ROMS...please
Patrick Bass wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
you need another 8mb
Anyone have any comments on the Security lab preparation books that are
available? Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51394t=51394
--
FAQ, list archives, and subscription info:
Actually it says you've got 8MB of flash and 4MB of RAM.
The 2500 series is one of the routers that has a single pool of RAM that
gets split at boot time into Processor memory and I/O memory. On these
platforms, you add up the two numbers to get the total RAM.
A few models (particularly the
I'm not sure what your question is aiming at. Is it to find a solution to
support a bigger bandwidth pipe? Or is it to optimize your bandwidth? If
you're approaching max cap with 2 T1s, you might want to change out the 2621
into a 3600 series or higher and add a channelize DS3. If you're
Here ya go
Here is some more info.
Intel SE440BX-2 motherboard (check the revision, the news revs of the board
seem to work better)
2 or 3 Intel 82577 Pro100/B NIC
Cisco 16MB PIX Flash card (part number: PIX-FLASH-16MB) (or the Cisco 2 meg
Pix flash card)
3 1/2 Floppy drive
Case/power
Davis, Scott [ISE/RAC] wrote:
I am doing the same thing for the same reason you are.
Thanks for the reality check. I'm going to order the books today. They'll
give
me and my lab partner something concrete to work with for chapter 11
and 12 of the Bruno book.
-- TT
Message Posted at:
Team,
Do you happen to know any new book for the lab which already cover the 3550
switch on full detail and not the 5000.
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but in rising every time
I have a few comments on this.
1) CIPT
At least in my case, the CIPT book wasnt enough
for me to pass the exam (failed by less than 1%,
but failed is failed). You may want to look into
the Cisco Press - Call manager fundamentals book
for supplementary study.
2) DQOS
The IP Quality of
I do not know if the solutions was shown on this
mailing list, but you can get access again by editing
the url set the home.htm or home.html at the end
replacing the file called expire or expiring...
--- Cisco Study wrote:
I got one for free, as I have CCO login. This CD
worked only
I'm getting ready for my CIT test for CCNP. I've heard there may be some
Appletalk on the test. I'm trying to experiment with the Appletalk show
debug commands. Since this is the first time I've even seen Appletalk I
can't seem to get it to work.
The department with the Macs doesn't know
Hello Group.
Currently, I have a router Cisco 7513 with 7 WAN interfaces, 2 Fast ethernet
and 2 Giga ethernet. I can limit the BW genered by the 2 Fast Ethernet with
a Packetshaper machine but I am not allow to control the traffic in the 2
Giga Ethernet interface with the Packetshaper(the
yes - there are two of them - the Configuration Guide, and the Command
Reference. They can be obtained for free from the Cisco web site.
seeing as the switches have not yet been introduced into the Lab, it is
unlikely that anyone has any clue as to what the new topology will look
like.
you may
Guys/Gals,
I've been swamped with emails asking on how to build a Franken
Pix firewall. All I can say is that anyone with a little brain can
figure out how to build a franken pix firewall. If you don't believe
me, do a show version on a Pix 520 and all the informations are
there for you to
Roly,
Here's the lab kit Im recommending/selling to tackle the new CCIE RS Lab
Exam:
Three Cisco 2501 routers
Two Cisco 2503 routers (ISDN)
One Cisco 2511 router (Access Server)
One Cisco 2522 router (FR switch)
One 2620 router (voice/isl trunking)
One 2610 router (voice)
Catalyst 3550
ISDN
no problemo. your English is far better than any language you speak
natively, I guarantee it!
in any case, I've sanitized this one, but it is a working config at a live
customer site:
there is some good QoS documentation to be found on CCO, particualrly in the
3550 switch Configuration Guide,
Hi All,
Am building a new network and have some questions to answer, before I get
cabling quotes. I have placed an order for a Cat 4006 at my core, and some
20 2550 switch's at my distribution layer. Running a pretty simple network.
MY question is:
1). To run between the 3 floors in my
2950 switches?
all Cisco GBIC's ( and in fact all GBIC's in general ) are SC connectors.
there are such thing as SC-ST patch cables, in case your contractor
terminates the fiber as ST.
Multimode fiber has a distance limitation of 1800 feet or so. You can use LX
GBIC's in conjunction with mode
Peter Walker : [EMAIL PROTECTED], [EMAIL PROTECTED],
[EMAIL PROTECTED], [EMAIL PROTECTED], TISCA wrote:
The IP Quality of Service book is not sufficient
for this exam. DQOS is not just about QOS, but
also about the tools available for deploying it.
Have a good reread of the Blueprint for
for that matter, your English is better than mine. I can't tell the
difference between you and I below.
I meant to say your English is far better than any second language I
speak.
sorry - did not mean to denigrate.
Chuck
--
coming soon:
www.chuckslongroad.info
Chuck's Long Road wrote in
First of all, congratulations on your parlaying your experiment into a
paying job. That's great!!
Second of all naw I think I'll skip the second of all . I doubt
that anyone wants to go down that mine is better than yours road again.
Hope your story serves as an inspiration to job
I understand your point. As I stated they were behind on Internet
connectivity. I wouldn't recommend trying to run IPX over any WAN link,
ADSL, Frame-relay,etc. However the problem that I see is that clients will
not upgrade their NetWare servers to the latest version and use IP instead
of IPX.
I know the IPEXPERT folks are coming out with a new Workbook in about a week
that incorporates the 3550.
Tom Larus
Juan Blanco wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Team,
Do you happen to know any new book for the lab which already cover the
3550
switch on full detail
Hi,
I am taking CID next week, and so far for my preparation, I have been
studying for SNA and Appletalk as well. From my understanding, both topics
are included.
anyway, good luck for your exam, and do let me know if SNA and Appletalk are
excluded.
Message Posted at:
Security Lab Workbook from www.hellocomputers.com. 16 Labs with remote
access to lab equipment. If you have your own lab...CCIE Lab Practice Kit
( McGraw Hill )However, I'm not a CCIE so take what I say with a grain
of salt. Dain.
Larry Melson wrote in message
[EMAIL PROTECTED]">news:[EMAIL
Hello Everyone,
I have a Cat2950 in a small office throwing up thousands of CRCs, input
errors and several runts on the port connected to the server. Clients are
getting disconnected and database on server is constantly having to be
repaired. The errors always follow the server no matter which
I'll try this from memory. The concept of a seed router was to eliminate
configuration mistakes. Config one router and let the others learn from it.
Sounds nice but isn't necessary. Might be useful in a backbone with scores
or routers hanging off one wire.
AppleTalk Phase 1 is long obsolete so
John, I would recommend installing both some multimode fiber and single mode
fiber. Most cable vendors can provide a single sheathed set of cables that
includes both types of fiber. The distance for typical multimode fiber on SX
GBICS is at least 220 meters, some Cisco sources will say their
Hi, there
We met such a problem, while two Cisco 1720 routers and one 3Com router
are interconnected via a share HUB, in a single collision L2 as well as
L3 domain, the problem is somehow we can't PING the 3Com router from any
of Cisco 1720 routers, but the two Cisco 1720 router can PING each
Hi Leo
Use no ip proxy-arp in the Cisco 1720 routers ethernet interfaces.
And try is that fine.
thanks regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51423t=51422
--
FAQ, list archives, and subscription info:
The only GBIC that doesn't care whether or not you use MM or SM is the LX/LH
GBIC. There are two other types that might benifit your situation. The SX
GBIC is cheaper and is only compatabile w/ MM. I have seen instances where
I've caught link off of SM but only from a 3 meter patch cord. The
From a Unix machine you would type Ctrl ] (Hold the Ctrl key down and the
right bracket). At the prompt type send break or send brk . If you are
using a windows program, do a search on google to find out how to send a
break from that application. The break must be done within 60secs after a
Also...I have tested the wiring(basic tester...no NEXT/FEXT or other
factors...but lengths of cable are under 50ft) and replaced patch
cables...still no luck. Dain.
Dain Deutschman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello Everyone,
I have a Cat2950 in a small
Hi,
I have a DSLAM in which I have an MTU size variable.As far as I know,
DSLAM's are atm devices which sends 53 bcells on to the network.So what is
the implication of a MTU variable in the DSLAM?
If so, what is the best size in which we can set.In the DSLAM which I have ,
the default is 1500.
Why can't you use the summary-address on the ASBRs. Is there some
restriction?
Jay Greenberg wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello group,
I seem to have a problem with OSPF external LSA summarization. I have
an Ethernet segment in area 4. There are 2 ASBRs
Oh, AppleTalk, my favorite subject! ;-) See comments inline:
Harold Monroe wrote:
I'm getting ready for my CIT test for CCNP. I've heard there
may be some
Appletalk on the test. I'm trying to experiment with the
Appletalk show
debug commands. Since this is the first time I've even seen
Anyone know Cisco CCIE study group in Bay area?
Join the worlds largest e-mail service with MSN Hotmail. Click Here
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51431t=51431
SNA and Apple are not present in the exam, I did this exam about 2months ago.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51432t=51344
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Leo Song wrote:
Hi, there
We met such a problem, while two Cisco 1720 routers and one
3Com router
are interconnected via a share HUB, in a single collision L2 as
well as
L3 domain, the problem is somehow we can't PING the 3Com router
from any
of Cisco 1720 routers,
Is the 3Com
How could proxy ARP be relevant to his problem
Jagan Krishnaraj wrote:
Hi Leo
Use no ip proxy-arp in the Cisco 1720 routers ethernet
interfaces.
And try is that fine.
thanks regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51434t=51422
I'd like to start studying for the CID Exam.
I have the CID book from a friend. I have looked at the objectives on the
cisco website, and SNA and Apple are not listed there. But they are in the
CID book. The objectives also don't list anything more (to replace SNA and
Apple). So my question is
Priscilla,
comments inline...
- Original Message -
From: Priscilla Oppenheimer
To:
Sent: Wednesday, August 14, 2002 2:40 PM
Subject: RE: OT: Nanog thread - Routing Protocol Security [7:51335]
Jeff Doyle is allowed to ask questions too. ;-)
NT: I do beileve I've seen
91 matches
Mail list logo
