Greeting to you all techi guys ..
My name is Rajesh ... i have a new project to implement. Basically i am
checkpoint guy .. I need to implement cisco PIX firewall 515 at one of our
customer place . All i need from you guys is a sample config with nat enable
with static mappings ..
Thanks
glad you got out safely.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20656t=20644
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
I had cleared CCNA/CCNP long time back almost 10 months now but have not
yet received the certificates from CISCO. Any idea where and whom to
contact to followup on this? Thnx Indranil
Get your FREE download of MSN
That's really long. I got my CCNA certificated in 20 days in India.
Why don't you visit. www.cisco.com/certifications
Mukul
Indranil Banerjee wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I had cleared CCNA/CCNP long time back almost 10 months now but have not
yet received
It seems I have problem with the STP.
It is not a trunked link.
I have two catalysts connected via cross calble (fastethernet 0/24) and both
of them are connected to a 7206 (fastethernet 0/1) via BVI interface.
If a set the fastethernet 0/24 in bloking (as per James.Kilby suggestion,
thanks) I
dear all
anyone know if 1750-4V bundle series has enough configuration, plug play
for
4 voice port and serial wan port without any additional feature such as IOS,
memory, card etc.
thankyou
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20661t=20661
I have been also working on this and finally I am placing order for
Cisco 1751 - V
4 Channel Extra DSP module
WIC 1 T Card
2FXO Card
2FXS Card
Yes, Cisco 1750-4V is with 2 DSP and you can put 1 WIC and 2VIC card into
it. It has required software for Voice. I selected 1751 since it has more
DRAM
Patrick Donlon wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
MJ
here a table with some bandwidth figure for your traffic, as the others
state 150ms is about the max delay after that then you can't guarantee
quality. One major things to look for would be your qos on the local
Hello,
We are using Cisco 3640 and Alcatel 4200E PBX and want to implement VoIP,
PBX is accepting QSIG signals and router is giving CCS signals, how can i
change settings in the router so that it can give Qsig signals.
thank you
Ranga
Patrick Donlon wrote in message
[EMAIL
Ranga,
Can you tell me how you have implemented VoIP, I mean I would like to
understand your network flow. I am in coming week is going to put VoIP. We
have Toshiba digital EPABX and I am going to use FXO and FXS cards.
Your suggestion would be really useful.
Mukul
Ranga wrote in message
Hi MJ,
Here is my Network flow
we have 3 branches in 3 different countries.
Between these branches we have 512 KB lease line for data. branch 1 we have
Cisco 3640 router and T1 card
and Nortel PBX , branch 2 we have Cisco 3640 router and E1 card and Nortal
PBX, branch 3 we have Cisco 3640 and
Could be valid
1010 broken down is000|1|0|001|
000Normal frame
116 byte lenght
0Direction left to right
001Size1.470
Always Zero
Ring 0x011
bridge 0x1
Ring 0x110
Brideg 0x1
Ring 0x101
Bridge 0x1
Ring 0x001
Bridge
t/121t2/dt_qsig.htm#xtocid1165410
URL to help you config your pri for qsig
Ranga wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
We are using Cisco 3640 and Alcatel 4200E PBX and want to implement VoIP,
PBX is accepting QSIG signals and router is giving CCS signals,
Maybe this time you can see it
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
t/121t2/dt_qsig.htm#xtocid1165410
Ranga wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
We are using Cisco 3640 and Alcatel 4200E PBX and want to implement
Try www.addall.com and let if find the lowest price.
Eugene
MJ wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
Can you recommend me the website of place where I can get books at the
cheapest prices. If someone know anything based in Singapore that would be
great
www.bestbookbuys.com
MJ wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
Can you recommend me the website of place where I can get books at the
cheapest prices. If someone know anything based in Singapore that would be
great otherwise suggest website which offers
You might want to think about upgrading to PIX6 and using the gui client.
It's very similar to checkpoint...
RAJESH AGNIHOTRI wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Greeting to you all techi guys ..
My name is Rajesh ... i have a new project to implement. Basically
Try www.pcdiscountbooks.com I have purchased from them with no problems.
-Original Message-
From: Eugene Nine [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 8:54 AM
To: [EMAIL PROTECTED]
Subject: Re: Where can I get Books at lowest cost. [7:20642]
Try www.addall.com and
I like to use bestbookbuys.com
-Original Message-
From: Eugene Nine [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 7:54 AM
To: [EMAIL PROTECTED]
Subject: Re: Where can I get Books at lowest cost. [7:20642]
Try www.addall.com and let if find the lowest price.
Eugene
MJ
I4m the one who is wrong. Sorry I got confused with BCSN that is the one I
was talking about . Regarding BCMSN it4s not so difficult, VLANS, Multicast
etc.. to put it in a nutshell NOT SO COMPLICATED at least for me.
Best wishes
-
Alberto Martmn
Mark Kinley wrote:
Hello All you cisco mentors out there
I have a question regarding a particular device on an existing network
that i cannot connect to after i have set up the trunk.
The device is address 172.21.1.248 ..a reporting system.
I have a p.c on the same network that
Hi Jeff,
Thanks for the reply...
I will try to simplify this ...
X---172.21.0.0---{172.21.1.55} 4 /1-12 trunked
ports--*FDDI trunk
4/1,2*
(network) ||
(cat6509) |
|
|
For those that asked where to find the lowest price on books I suggest you
find the comparison sites such as these below. Some ship overseas, some
dont.
http://www.bestwebbuys.com/books/index.html
http://www1.ecompare-corp.com/cgi-bin/books/booksearch.cgi?input=1587200236;
type=ISBN
I've found the best book deals for Cisco Books at www.Walmart.com It beats
most of the prices I've found on Bestbookbuys.
--
James Haynes
Network Architect
Cendant IT
A+,MCSE,CCNA,CCDA,CCNP,CCDP,
CQS-SNA/IPSS
Bolton, Travis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I like
Quick question regarding some alarms that I'm receiving on a ACS NT server.
The errors are stating that certain process CSAuth, CSMon, CSTacacs, are
being stopped and the five seconds later they are started again. This
happens everyday and I found out that this is being caused by the Windows NT
There are many examples in the Cisco documentation:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/config/exam
ples.htm
-Kent
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
RAJESH AGNIHOTRI
Sent: Thursday, September 20, 2001 11:38 PM
The reason that both serial interfaces stay up is because the routers
are talking LMI their repective switches no problemo. On a link between
the US and Asia thaere are most likely other switches and network
devices so if you did a sh frame pvc you would see your PVC is either
inactive or
Most web browsers use passive ftp, just use ftp:// as the path instead of
http. You can also check http://www.tucows.com for windows based ftp
clients such as ws-ftp.
HTH,
Kent
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jim Bond
Sent: Thursday,
Hi
I am looking at getting IP Multicast working on my Core network and also
access to the MBone.
Can any of you please forward me towards any good books/white papers on how
to do this.
I passed BCMSN so have a fair under standing of the theory but 100% sure on
how to make the connection from
I am trying to picture how my branch office is connected through the LEC's
local loop to the Frame Relay provider.
If you would start at the smartjack and follow the cable path all the way to
the Frame Relay provider, how different would it be from following one of my
phone lines if you compare
Once again in the spirit of Chuck, this post from NANOG has a link to an
article on BGP instabilities that may be related to Internet worm
attacks.
Andras Bellak
Director, WAN Engineering
[EMAIL PROTECTED]
-Original Message-
From: Tim Griffin [mailto:[EMAIL PROTECTED]]
Sent: Friday,
The PIX itself has no imbedded rate-limiting functionality, so if you wanted
to limit traffic streams inbound to the PIX you would need to use some other
tool. For example, you could front-end the PIX with a router and use CAR to
limit certain traffic streams outbound from the router to the PIX.
Sorry. PIX does not allow bandwidth modifications. It would have to be
done at the router outside or inside the PIX on each end.
- Original Message -
From: Eugene Kushnirskiy
To:
Sent: Thursday, September 20, 2001 10:06 PM
Subject: IPSec tunnel throughput [7:20640]
Is it possible
I've got a 2916 XL switch with 11.2(8) SA3 software. I want to create
a vlan 2 and make that a management vlan. But it is not letting me
assign an IP address to it.
When I do :
conf t
int vlan 2
It comes back with % Unrecognized command . I've tried shutting down
vlan 1 first, it did not
After searching my Cisco Part list, my products reference guide and the cco,
I cannot find the part number for a DCE to DTE back to back cable, I am
needing one for my lab at work, but we have to have the Cisco part number to
order. Any help would be appreciated!
Thank You,
Robert Fowler
So what is the passing score for this exam? I'm also taking it next month.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20691t=20597
--
FAQ, list archives, and subscription info:
I bought the Cisco prep library ($150 for all 4 CCNP required books)and just
finished the BCMSN book. It was a very easy read. Now time to study and take
the exam next month. Good luck!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20693t=20399
What is a better design?
PIX and VPN Concentrator in Parallel
or in Series
Also
The the authentication
forward to radius to ACE
or to CISCO ACS
would like to hear what the Gurus have to say
Faisal
__
Terrorist Attacks on U.S. - How can you
This is off the top of my head but I think the ability to assign the
management VLAN other than VLAN 1 was a feature incorporated in
12.0.somethingoranother
Dave
khramov wrote:
I've got a 2916 XL switch with 11.2(8) SA3 software. I want to create
a vlan 2 and make that a management vlan.
As far as I know, Cisco does not produce/provide such cable - you must seek
help somewhere else.
Follow the RouterChief link below, and click on the KG2 link under where to
buy stuff.
They have some of the best prices to my knowledge when talking cables and
memory for Cisco.
Hth,
Ole
guys,
a quick quiery
i am running several 6509`s ..about 50 in different sites..and i can `t see
this set port host command
WS-C6509 Software, Version NmpSW: 5.3(2)CSX
6509_3 (enable) set port host
Unknown command set port host. Use 'set port help' for more info.
6509_3 (enable) set
As far as I know there is no such Cisco part..
Only third party companies make such cables..
Try Pacific Cable www.pacificcable.com...
Or search the archives for other companies that have the back to back
cables...
-Original Message-
From: Robert Fowler [mailto:[EMAIL PROTECTED]]
I found some serial dte-to-dce cables at Pacific Custom Cables. I bought
the 60-pin
variety, but it looks like they have smart serial versions too.
http://www.pacificcable.com/CiscoCables.htm
Robert Fowler wrote:
After searching my Cisco Part list, my products reference guide and the
cco,
I
Question.
Is it possible if using 4 ethernet ports on a router, to make 2 gateways
for traffic? I want to use firewall on this router too.
Hope you dont mind newbie questions here ;)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20700t=20700
well of course... But it would seem kinda silly... I mean...if you want
multiple gateways, it's usually for redundancy right? If that router fails,
then you're still screwed.
Now if you are talking about 4 ethernet ports on one router segregating 4
layer 3 networks, then yes you can do this as
Thanks Bob,
This has been very frustrating to me, because I have tried to experiment
with DSL to one of my branch offices, but because of their location, they
could only get IDSL through a third party DSL provider, and as you might
have heard, Northpoint went down, and when Rhythms took over,
The multicast book by Beau Williamson is very good. I haven't seen the
other one.
Priscilla
At 10:29 AM 9/21/01, Andrew Twigger wrote:
Hi
I am looking at getting IP Multicast working on my Core network and also
access to the MBone.
Can any of you please forward me towards any good
Anyone know any URL have white paper/discussion of network management tools
such as Tivolo , Ciscoworks, HP Openview (NM), Netmetrix, alertpage,
Spectrum ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20704t=20704
--
FAQ, list
Ooops. I did read maximum where it says minimum. Sorry. I guess the
8-dB attenuator inserts loss into the link and he's going to need one on
each end.
The reference says:
The minimum link distance for ZX GBICs is 6.2 miles (10 km) with an 8-dB
attenuator installed at each end of the link.
Very interesting. They say that neither the Baltimore train wreck nor the
WTC attacks destabilized the global Internet (HAH! ;-) But there does seem
to be a high correlation between Code Red and Internet instability, as well
as between Nimbda and Internet instability.
They don't go so far as
What kind of router is it?
4 Ethernet ports on the router sounds suspicially like those low-end (but
very useful) LinkSys routers that have a 4-port hub or switch inside but
just one routing interface. If that's the case, the answer to your question
is no.
Priscilla
Intresting Traffic
Guys,
As one of you suggested there was no long distance setup for the line.
Thank you for your help.
Michael
Scott Meyer wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have seen similar problems with an ISP. What are you dialing into?
Another
ISDN line, PRI, or a T1?
its a 2600 Router with a 4NME card, cost about 4,000 for just the card. Ok,
well if you say its that easy, hoping it is that easy when you thow in Cisco
Firewall IOS.
Intresting Traffic wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Question.
Is it possible if using 4 ethernet
In the frame relay cloud, under certain unusual circumstances (including a
trunk line that goes unidirectional), the one or both edge frame relay
switches may not see the outage. LMI will therefore not report the failure
from the edge switch to the router, the PVC status is not changed on the
Hey everybody,
Have 2 2524's running in my lab, with the 60 pin
DTE/DTE cable connecting the 2 serial ports, no
DSU/CSU. How do I config one as the DTE and one as
the DCE, with IOS 11.1, running frame-relay
is the command: frame-relay intf-type dce
enough?
I get a lot of interface
Hi try this we site
http://www.imtek.com/IPSec.html
shachar bobrovski
Ccna, Mcse, Mcp+I
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20716t=20513
--
FAQ, list archives, and subscription info:
If you skip the Frame Relay encapsulation and use HDLC instead, all you got
to do is provide the clock at the one acting as DCE:
router-dce(config-if)#clock rate 64000
If you want to simulate a Frame Relay, you will need a third switch. One to
act as a Frame Relay switch, and two to
There is DTE/DCE on both the physical level and the Frame-Relay level. So
configure the link with a clock speed on the end that has the DCE end of the
cable. Then configure the frame relay command as you have given below. The
layer two DCE end does not have to be the layer one DCE end. Experiment
Just wanted to thank all those who have provided answers to me over the last
year as I have worked on my cert's and to those people who post question and
answers that are just downright interesting. It was a little harrowing over
the last week and a half because I was scheduled to take the test
Would anyone be interested in getting together to start a CCNP chat list via
Aol Instant Messenger? My AIM/AOL name is TEK777. Maybe security topics or
whatever too, just thowing out and idea.
Brian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20720t=20720
Many congratulations, especially under such tough circumstances. Without
editorializing too much, your passing the written almost seems patriotic in
a way, or maybe I'm just off base. In any case, more power to you, and I
hope to be joining your ranks in a few short months.
Don Claybrook
Hai,
Is there any possible way to use NM8AS, and 2W2FE on 7505 RSP2 router ? If
it supports what are the interface cards that I require to get.
Thanks,
Kiran
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20722t=20722
--
FAQ,
David Eitel
Network Engineer
UGO Networks, Inc
Phone: 212-624-3361
Email: [EMAIL PROTECTED]
URL: http://www.ugo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20723t=20723
--
FAQ, list archives, and subscription info:
This is really bothering me and I hope you can help,
When I advertise a route:
network 172.16.0.0 0.0.255.255 area 0
The other OSPF routers display it in their routing
tables not as a /16 network, but show the actual IP
address of the interface followed by /32.
This bugs me, can anybody tell
If you shove Fast Etherchannel in to Feature Navigator you'll see it comes
up with 7200's and 7500's only.
Regards,
Gaz
Thomas N. wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I have a Cisco 2621 router with 2 FastEthernet ports, and plan to
implement
trunking
If you want cisco genuine cables you have to order two cables, usually v.35
male DTE and v.35 female DCE. I've got a cable here with part# 72-0791-01
(i think this is an old part #) which is the DTE male. I also have the v.35
female DCE cable which has part # CSV35FC-10 (I think this is more
Is this a Point-to-Multipoint interface? They don't advertise the subnet,
just the interface addresses. When you have point-to-multipoint interfaces
you'll just see a bunch of host routes in the table for all the routers on
that network.
RFC Six Thirty Four wrote:
This is really bothering me
Hard luck on trying to simplify it Mark :-)
Not sure I've grasped what you're doing, but best guess.
Are you trying to connect a PC to a port which you have configured as a
trunk?
The trunk should be between your switches only. (Normally)
I think what someone has suggested is to put
Where do you get them all from?
Lots of friends with the type of job that I want - time on your hands. Can I
join your mailing list.
Or do you have one of your Artificial Intelligence Machines making them up.
If so.Natasha, that's one hell of a bot you've got there ;-)
Gaz
Natasha wrote
Yes, it is a loopback.
Thank you all so very much!
..RFC634
--- Jon Mitchell wrote:
It is probably a loopback interface, right? OSPF
advertises loopbacks as host routes. The network
statement never dictates the size of the address
space advertised, just which links are in the
Hi,How long does it take for one to schedule the Lab after having passed
the Written? I passed it more than 2 weeks back and till today I have not
received any email from Prometric or Cisco regarding scheduling the lab.
I was told 3 days!!Any ideas?Thank you.
I have tried to enable this on my 506 with version 6 software with the
following two
lines:
http server enable
http 0.0.0.0 0.0.0.0 inside
But...nothing is available when you hit the pix with a web browser. ie no
server
running. Did I miss something??
Kevin
Dennis H wrote:
You might
When doing a show ip eigrp topology command, if a destination is in the
Active state, there's an additional field called the state field in the
output. According to Cisco documentation the state field displays the exact
EIGRP state that this destination is in. It can be the number 0, 1, 2, or
there is a link there that will take you to an online registration thingy.
Enter your drake ID, date you passed and your score.
And no need to stress, there is a huge waiting-list.
(Brussles is 9 months or so now, and i think San Jose is even worse)
Good luck
At 01:29 22.09.2001, you wrote:
Hi Priscilla,
Not sure if this is what you need, but this is the closest
I can find.. I was looking at it the other day.
Paul
Send flag is:
0x0 If there are packets that need to be sent in relation to this entry,
this indicates the type of packet.
0x1: This router has received a query for
From what I remember, it is supposed to set some sort
of a max limit to the time a process can run.
I read this a little while back and I have the answer to it
some where so I will dig for it..
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20739t=20723
Thanks for the tip Karl...
Fwd it to my buddies that NEED it...
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20740t=20692
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Does anyone have a successful config for ospf demand-circuit
over ISDN, where the dialer profile is used ?
My config is as follows, but whenever I put ip ospf demand-circuit
on dialer interface 1 (of RA), the show ip ospf command will show it
not a ABR anymore and OSPF stop to work right away!
If you bought $1000 worth of Nortel stock one year ago, it would now be
worth $49.
If you bought $1000 worth of Budweiser (the beer, not the
stock) one year ago, drank all the beer, and traded in the cans for the
nickel deposit, you would have $79.
My advice is to start drinking heavily.
I used www.half.com in the past. Books are used and usually half price or
less. Ask them if they mark the books with markers before you buy. Many
discount bookstores practice that.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
MJ
Sent: Thursday,
I just received an e-mail with a virus attachment. It's an old one
([EMAIL PROTECTED]) but thought I'd mention it.
Looks like it originated from someone with dial-up access from somewhere in
New Jersey and is possibly someone on the Cisco list as I mainly use that
e-mail address for the study
Here are some of the places...
1. www.ebay.com
2. www.half.com
3. www.mysimon.com
4. www.bookpool.com
5. www.amazon.com has started brokering used books
those are 5 good places to find cheap books. on ebay and half.com, they
sell lots of used books, but you have to be patient
good luck!
Try this link..
http://www.cisco.com/warp/public/cc/pd/iosw/tech/carat_wp.htm
Mohammed Saro wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
How can i divide a given bandwidth between leased lines and ADSL
subscribers
any hints or guides for dividing bandwidth among them and
Try emailing [EMAIL PROTECTED] . I've bought back-to-back cables from him.
Robert Fowler wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
After searching my Cisco Part list, my products reference guide and the
cco,
I cannot find the part number for a DCE to DTE back to back
Try emailing [EMAIL PROTECTED] . I've bought back-to-back cables from him.
Robert Fowler wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
After searching my Cisco Part list, my products reference guide and the
cco,
I cannot find the part number for a DCE to DTE back to back
go to the Cisco web site
http://www.cisco.com/warp/public/625/ccie/
use the schedule a lab drop down.
you will need your i.d. number and your passing score ( both found on the
paper that the test center gave you )
have fun.
Chuck
-Original Message-
From: [EMAIL PROTECTED]
There is a thread being discussed on Cisco Network Professional Discussion
page about Cisco Certifications such as CCNA, CCDA, CCNP, CCDP and CCIE
being sold in India and Pakistan for the cost of the exam. Several people in
the Forum have confirmed it and have even said it is common knowledge.
Like Priscilla, I have not heard of the Parkhurst book. I was
able to read through the Parkhurst BGP guide and it was pretty
good in terms of hands on configuration and troubleshooting.
In my humble opinion, you cannot get a better bang for your
buck than Beau Williamson's Developing IP
I would like to upgrade to version 4.1(7) -- does not require any memory
purchase and will solve many of my problems.
How can I get the software?
Pierre-Alex
-Original Message-
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 9:05 PM
To: 'Pierre-Alex
interesting solution. certainly a CCIE level convoluted backwards and
therefore Lab type answer :-
OK, here is what I did.
On the hub router - must issue the no ipx default-route command. otherwise
you cannot assign the IPX address FFFE to an interface. also, in order
to advertise the
Thanks for the hint, Paul. It's another case where reality doesn't match
the documentation. The reality is that the data that gets displayed with
show ip eigrp topology varies a lot depending on the network, its
problems, and which variety of the command you use.
With your comments from
Do you ever sleep
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 8:37 PM
To: [EMAIL PROTECTED]
Subject: RE: EIGRP state [7:20735]
Thanks for the hint, Paul. It's another case where reality doesn't match
the documentation. The
You have to instal the HTML content. The PDM (PIX Device Manager) is a
separate install from the OS.
---
Rik Guyler
-Original Message-
From: Kevin McIntyre [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 7:48 PM
To: [EMAIL PROTECTED]
Subject: Re: PIX 515 firewall sample
Hello everyone,
I'm about to take my CCIE written, although I have no practical working
experience with Cisco routers. I am currently a hardware deployment engineer
at a large corporation. I'm just wondering if anybody thinks that after
passing the CCIE written exam, I can become a junior
The link is at :
http://www.cisco.com/warp/public/625/ccie/
but if your test has just been cleared 2 weeks ago , there are chances that
your record has not been updated like mine . You might have to wait for
another week for the updation as per the mail I had recd from Cisco and then
schedule ur
Hi All,
Can anyone show me some good URL regarding the Fragmentation for Frame
Relay network? Thanks!
Thomas N.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20757t=20757
--
FAQ, list archives, and subscription info:
I'm writing about IPX and need some cute hex-word IPX network names, like
DEADBED, or FEEDDEE...
I'm stumped, anybody got any they like to use?
--- Dennis
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=20758t=20758
--
FAQ,
Or... There are a lot of I always wanted to sell books on the Net
companies out there. If you have time to wait for the product to ship, you
can avoid the Amazon's FatBrains.
www.Halfpricecomputerbooks.com (search engine)
www.bestbookbuys.com (books are usually a little dated)
Phil
-
I need help w/ a little config info... RtrA (s0 192.1.1.4)
RtrB (s0 192.1.1.3) connected via serial cable. They can each ping each
other. RtrB has a PC (ip address 192.168.1.1)connected to its' e0 int
(192.168.1.10) through a hub.
How can I ping from RtrA (s0 192.1.1.4)to the PC attached to
99 matches
Mail list logo
