how many users does pix 506 support simultaneously
Best Regards
Have A Good Day!!
;;;
Farhan AhmedR
MCSE+I, MCP Win2k, CCDA, CCNA, CSE , CCA
Network Engineer
Mideast Data Systems Abu Dhabi Uae.
;;;
Cisco is pretty good about obfuscating on this point. they don't like
cutting into the 515 territory ( and pricing )
it depends, of course, on what you are doing. 10 simultaneous VPN tunnels
tops. should be able to support 100 web browsing users. your mileage may
vary.
HTH
Chuck
-Original
Sorry for OT, I have Cisco 3640 for sale at eBay below $6k, here is the quick
description:
a.. Cisco 3640 router
b.. 1 - Port Fast Ethernet Network Module (NM-1FE-TX)
c.. 4 - Port Ethernet Network Module (NM-4E)
d.. 1 - Single port ATM 25 Network Module for 3600 series(spare) (NM-1ATM-25)
e.. 2
Congrats Ole Drews!, You have a lot of respectable experience and now CCNP to
boot! Many good wishes.. for you and your family :-) In the
end they are
what count the most!..
Ole Drews Jensen wrote:
Here's a thanks to all of you who directly and indirectly helped me pass
Congrats.
I dl your apps yesterday and they are very nice. Thank you for writing
them.
Good luck with the CSSI.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ole Drews Jensen
Sent: Saturday, September 29, 2001 11:52 AM
To: [EMAIL PROTECTED]
Subject:
Trying to figure the following routing issue out with the following:
http://cisco-skin.tripod.com/Network.htm
Thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21508t=21508
--
FAQ, list archives, and
I had a similar problem once. I have redundant supervisor modules with
msfc's
in the 6509 and had to reboot one of the msfc's in the switch. The reboot
fixed the problem.
Patrick Donlon 09/28/01 03:45AM
Have you checked the routing of this VLAN, if it's consistently dropping 50
% of packets
Hello,
We have about 20 core routers running EIGRP. For some
reason, EIGRP recaculated ALL routes every 10-15
hours. This seems odd because I think EIGRP will only
caculate effected routes, right? I turned on debug ip
eigrp notification on some routers but didn't find
anything wrong. How do I
In a message dated 09/30/2001 12:49:50 PM Central Daylight Time,
[EMAIL PROTECTED] writes:
Subj: EIGRP problem [7:21510]
Date: 09/30/2001 12:49:50 PM Central Daylight Time
From: [EMAIL PROTECTED] (Jim Bond)
Sender:[EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED] (Jim Bond)
To:
Can you give any more information regarding the static ARP's/CAM's applied
Jeff?
Cheers,
Gareth
Jeff Duchin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Trying to figure the following routing issue out with the following:
http://cisco-skin.tripod.com/Network.htm
Thanks
MSFC1s, or MSFC2s? What version of code? I know there are multiple issues
with in-chassis redundancy with MSFC2s and HSRP...
-Original Message-
From: Jeff Duchin
To: [EMAIL PROTECTED]
Date: Sun, 30 Sep 2001 12:35:38 -0400
Subject: Help with LAN design/routing [7:21508]
Trying to
Anyone out there done much with bridging serial ports on the AGS?
The Cisco documentation says different things on the subject one source says
concurrent bridging wont work on this box others make little distinction. I
wish to bridge on the 8 serial ports and route on the 12 Ethernet ports.
Encap
I can't agree with you more about the questions being worded badly. I also
just finished the CIT exam for my CCNP. Every CCNP test I went into I felt
very confident and found myself during the test wondering where the hell did
they come up with some of these questions. You have to be a laywer
Switch A has SUP2/MSFC2 running 12.1(7)E and Switch B has SUPq/MSFC1 also
with 12.1(7)E. Both are configured for Redundancy/H.A./Configsync. Any
ideas?
The static arp entry is on each MSFC stating the MAC/IP address of the
virtual ip address of the firewall's (as StoneBeat uses this much the
There must be a problem with me, because I didn't find anything on the CIT
exam to be poorly worded or difficult to understand. Then again, I used to
work at a law firm so perhaps my background gives me an unfair advantage.
(-:
Previously I've expressed my opinion about the state of the CCNP
Hi all,
I am a recent CCNA graduate, and am about to tackle the challenges of the
CCNP Routing 2.0 exam. Look forward to asking/providing help where possible!
Anyway, I have a question - does anyone know the ITU spec, or RFC that deals
with TCP ports for H.225 RAS messages. I know that port
I did find this on StoneBeats website:
You have to define also static ARP entries for the directly connected Cisco
routers if you are not using dedicated IP addresses.
http://www.stonesoft.com/document/art/329.html
Jeff Duchin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Thanks to all for all the help
I passed BCRAN and CIT on Saturday
D'Wayne Saunders
Network Admin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21521t=21521
--
FAQ, list archives, and subscription info:
The Cisco Press 'Cisco Internetwork Design' and Top Down Network Design
books along with the exam objectives from CCO is what I used.
Dale Frohman wrote in message
news:[EMAIL PROTECTED]...
Hello Group,
I was wondering what book is the best in preparing for the CID exam.
I noticed a new
An easier way to see if you have any active routes would be sh ip eigrp
topology active
You could also add 'eigrp log-neighbor-changes' (double check the dashes)
under the eigrp configuration. Make sure you have no logging consol in your
config as well and either log to a syslog server or to a
On the clock question, the smaller routers do not have a battery to keep the
clock settings during a reboot. You could add ntp to your configuration so
the clock is set automagically when the router's links come back up. Not
sure what you are asking on the second question but why wouldn't you
Sarwar,
You are using an early development release of software.
I have checked the caveats regarding your problems but they don't seem to be
listed. you can check yourself on
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120cavs/120tcavs.htm
You will probably find that the
Hi all,
I have made a complaint about wording of questions during each Cisco exam I
completed.
There are some subtle differences in different flavours of English that can
create confusion. I would imagine this would even be worse when the
questions are translated into other languages.
Just a
Hi,
I find CCIE C/S seems more care about the lower 2 layers. Is there
anyone have experience with the exam? How about the LAB? Is is the same
as the R/S track?
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21527t=21527
Are you confident to pass the lab with your limited
hands-on ??
--- Vijay Patankar wrote:
Hi everyone,
I am new to this group and currently gearing up for
the ccie lab in Sydney,
scheduled for January 16th of next year (2002).
I am a CCNP with a very limited hands-on.
I live in
Hi guys,
Any one can recommend any practical scenerio/Example Involving Proxy-ARP
by specially considering RS LAb.
I heard this word many times but not sure how to use it practically and
where.
Thanks for the Help guys.
Cisco Lover
That's only true with the weird C/S written exams. While I can't violate
NDA, I can say that the C/S lab is considerably different from the R/S lab,
and it really doesn't have all that much to do with the lower 2 OSI layers
(again, the schism between the C/S writtens and the labs is apparent).
Hello everyone ,
Has anyone here has implmented VoIp over 64K digital leased lines over the
internet ?
Would you like to share your experience here .. ?
Mukul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21532t=21532
--
Hi all,
I just wanted to know how i can get pp authentication to work. When I
enable either PAP or chap the line protocol goes down. The debug PPP
negotiation output says that the request was timed out.
What I did then was I took an example out of the CCNA manual and even
When I did exactly that
Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but try the following
Ra#
Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but try the following
Ra#
The answer is simple...Cisco support is unbeatable and
the best in the world
VetteBoy
--- wirechild wrote:
I must greatly agree with you! We have about 750
Remote sites that
used to be about 40% cisco and 60% Nortel/Bay. We
had such a
horrible time with getting support out of Nortel
yeah, I'd like to hear about this too. :-
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
MJ
Sent: Sunday, September 30, 2001 7:47 PM
To: [EMAIL PROTECTED]
Subject: VoIp over 64K leased line [7:21532]
Hello everyone ,
Has anyone here has implmented
Wow--what timing. I'm just writing a section on troubleshooting ISDN...
Try debug ISDN ppp authentication. You should see why you've got a
failure problem. I suspect you've got a problem with the usernames and
passwords not matching.
-- Leigh Anne
-Original Message-
From: [EMAIL
Try adding a cam entry not only for the actual ports the firewalls plug
into, but also include the trunk ports in the cam entry.
Clayton Price
Jeff Duchin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I did find this on StoneBeats website:
You have to define also static ARP
Hi All,
I would like to purge the entries in the MLS cache of the 6509, then let the
switch relearn the MAC. What commend should I use? Thanks All!
Thomas N.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21540t=21540
--
Get paid cash every time you receive email!
Sign up FREE at:
http://www.MintMail.com/?m=1149612
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=21541t=21541
--
FAQ, list archives, and subscription info:
considering I average 250 mails a day, from the various lists to which I
subscribe, I may never have to work again! ;-
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
caifeng tang
Sent: Sunday, September 30, 2001 9:41 PM
To: [EMAIL PROTECTED]
Subject:
Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but compare the following config
welcome to PPP!
Are you doing it over serial interfaces?
Post the configuration
-e-
- Original Message -
From: Omer Ehsan Dar
To:
Sent: Sunday, September 30, 2001 8:34 PM
Subject: PPP Authentication [7:21533]
Hi all,
I just wanted to know how i can get pp authentication to
40 matches
Mail list logo
