Edward, have a look at the following link:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008059a9df.shtml
--
Tassos
Edward Iong wrote on 04/11/2008 10:14:
about multicast-routing
there are two switches -SW1 and SW2
SW1 is connected to an sender, a router,
Mateusz Błaszczyk schrieb:
If the SPA card for the 7600 could do the switching, the cat 6500 should
also be able to do it. But even for the 7600 I can't find any
information on atm switching.
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslocal.html#wp1098419
Okay, this should
Hi List,
I have a Cisco 7600 / Sup720-3BXL (12.2.18SXF6).
Only the telnet port (23/tcp) is open.
If i try to open a session to a random port, i get back a TCP ACK/RST
packet from the CPU. I think it is normal. :)
But if I send lot of SYN packets to random ports, i get back lot of
ACK/RST
Have you tried control plane polcing ?
-Rakesh
On Tue, Nov 4, 2008 at 10:20 AM, Nemeth Laszlo [EMAIL PROTECTED] wrote:
Hi List,
I have a Cisco 7600 / Sup720-3BXL (12.2.18SXF6).
Only the telnet port (23/tcp) is open.
If i try to open a session to a random port, i get back a TCP ACK/RST
Hello all,
I have some vxrs running 12.2.31SB13 and have run into a strange
situation.
We use snmp for statistics gathering ecc .
Specifically we use the aal5 mib for atm info gathering
1.3.6.1.4.1.9.9.66.1.1.1.1.1
Everything seemed to be going fine but now I see that some vcs do not
show up in
Hi all
I read cisco lab book, it said to disble aut summary
but don't explain why
can you explain to me?
which ftp server is easy to use to backup?
or whicch way to backup except fpt server?
Thank you for your help again
Send instant messages to your online friends
Hi List,
I'm facing a trouble, I have a PIX and one ACS 3.3. The pix act like VPN
concetrator for the clients (Windows Based - Cisco VPN Client) and ACS like
authenticator I'm using TACACS+. All were working well. But now my boss
said: We need to get the VPN usage so I need:, who? when? and how
Dear All,
I need to send BPDUs in tagged frame. I don't want to use PVST and
PVST+ since stp instances per VLAN is not preferable at least in my
scenario.
I want to use standard STP or RSTP or MST. Is there any command in cisco
where I can send BPDUs in tagged (vlan) frame. I have been trying
Decent experience here.
As another posted stated make sure you have decent connectivity where the
box is going to reside.
The only real downside is low bandwidth and high latency and jitter. So,
no VoIP obviously and you will definately know when you are on backup.
And, make sure you test
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
2008/11/4 Sebastian Ganschow :
Mateusz Błaszczyk schrieb:
If the SPA card for the 7600 could do the switching, the cat 6500 should
also be able to do it. But even for the 7600 I can't find any
information on atm switching.
Hi
I have a Cisco 6509 with Supervisor-Engine 2 (WS-X6K-S2U-MSFC2).
According to the specification they have a MSFC2 on it, but i can see
that in the Output of show version.
I have put Out the Card and compare pictures from the MSFC2-Module with
the Card. So i can confirm, that a MSFC2 is
I'm seeing a lot of this in the logs of a 3750:
%PLATFORM_RPC-3-MSG_THROTTLED: RPC Msg Dropped by throttle mechanism:
type 37, class 14, max_msg 32, total throttled 24852
Thing is, where do I find out what message type 37 class 14 is? the
Output Interpreter just gives a generic message for
Thomas, have a look at the following link:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008013495f.shtml#msfc_2
--
Tassos
Thomas Czarnetzki wrote on 04/11/2008 20:47:
Hi
I have a Cisco 6509 with Supervisor-Engine 2 (WS-X6K-S2U-MSFC2).
According to the
Hi there...
Sometime this morning, we noted a sudden increase in outbound traffic to one
of our transit providers. Have now realized that some routes that should
prefer peering are now going via transit.
What makes this very strange is that in our routing table, the best route
chosen is not
Hi,
I have a problem between two 10 Gig interfaces. I have many errors between
two routers 7606.
I have two types of error : giants and frame and i search the problem.
R2#sh int te5/2 | inc Desc|MTU|error|frame|gian
Description: R2 - R1
MTU 9216 bytes, BW 1000 Kbit, DLY 10 usec,
0
We've been having good results with Verizon.
Couple months ago, they got EVDO backup to Internet and MPLS as well - for
VPN products, and in the process of making the backend systems ready to roll
out. No permanent IP yet and the IP are from Verizon Wireless. So, even
though they might say it's
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I need to send BPDUs in tagged frame. I don't want to use PVST and
PVST+ since stp instances per VLAN is not preferable at least in my
scenario.
I want to use standard STP or RSTP or MST. Is there any command in cisco
where I can send BPDUs in
(1) We've had good experience with this. Decent throughput, but high
amount of jitter/latency. Its just another internet access method at
this point... it works fine.
Really its about the carrier...
(2) Cables and antennas as needed for getting the signal required can be
expensive if you go
Seth Mattinen wrote:
Does anyone have any experience with the HWIC-3G-* cards in real life?
I'm considering emergency access plans using these as opposed to
traditional methods, and I'd be interested in any success or horror
stories before jumping in.
Works here in Germany with T-Mobile
I forget where I left my crystal ball.
Can anybody help me to find it ?
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Hello...
On Tue, 2008-11-04 at 04:46 +, ambedkar wrote:
hi, i want to implement layer-2 backup with minimum delay with cisco
2950 switches.
i have seen flexlinks, but this is for cisco 3500 series and above.
uplinkfast
please help me in this regard.
Thanks in advance.
bye.
no auto-summary
This is useful when you are using classless routing protocols.
If you don't disable it then it will auto summarize your subnets.
Guild FTP is a software easy to use for the backup.
you have to define the ftp user name and password.
ip ftp username [User name]
ip ftp password
Hello,
I am not able to filter prefixes using export map under vrf on a 6509 . I
can set attibutes by matching prefixes with out issues , it's just that I
can not filter them . I have tried 12.2(33)SXH3a and 12.2(18)SXF7 with no
luck.
I was wondering if anybody had come accross the same
Rakesh Hegde wrote on Wednesday, November 05, 2008 06:37:
Hello,
I am not able to filter prefixes using export map under vrf on a
6509 . I can set attibutes by matching prefixes with out issues ,
it's just that I can not filter them . I have tried 12.2(33)SXH3a and
12.2(18)SXF7 with no
Hi,
On Tue, Nov 04, 2008 at 05:20:39PM +0100, Nemeth Laszlo wrote:
So the question: can i limit the number of ACK/RST packets/sec what the
router send back to the SYN sender?
Yes. Check www.cisco.com for control-plane policing (CoPP) - this
is exactly what you need.
It needs a bit of
25 matches
Mail list logo