I think this would provide a comprehensive overview:
Peer-Groups are a relatively old feature which was introduced to provide
two functions:
- Reduce BGP configuration by creating a template which can be
reapplied to multiple peers
- Reduce CPU workload for BGP updates, as all members in a
hi,
could anybody recommend core router and modules required for below specs
core router
- Wire speed throughput
- Chassis based technology (HW Redundancy – 2 pcs.)
- Passive Backplane
- Scalable bandwidth
- Redundant power supplies (n + 1)
- Hot swappable hardware elements
-
Hi Guys,
We have a number of Cisco 3550's doing QinQ on a Metro-E network.
I was wondering whether anybody is succesfully copying the 802.1P info from
the Inner Tag, to the Outer Tag.
From the following doc:
hi all
we have wimax network , our network are all cisco Cisco 7606 , Cisco 6524 ME ,
Cisco 3750 ME
and we enabled MPLS in our network in order to provide MPLS service to our
customers (VPLS , L3VPN , EoMPLS)
what is the best MTU value that i can enable on my network either on interface
basis
Hi All,
A telco (fixed line/mobile carrier) is looking to deploy a centralized
syslog solution for their environment for storing, viewing
and analyzing logs.
The plan is to have about 1,000+ server and network nodes configured to send
logs at all levels to the syslog server 24/7.
Among other
Hi,
Due to the global shortage of 73xx routers I am contemplating to use
some old 3550-12Ts as CE routers on a stie where a connection is
required urgently.
I will be using a fibre link from the local ADM as my WAN link (int
g0/11 or g0/12 on the 3550)
I have enough experience with the 3550
On Jan 11, 2010, at 10:27 PM, Felix Nkansah wrote:
A linux-based platform / commercial offering is preferred.
http://www.splunk.com/
---
Roland Dobbins rdobb...@arbor.net // http://www.arbornetworks.com
Injustice is
I believe that Finisar makes many of the Cisco optics. I'm looking for the
Finisar part number that is essentially the same as the Cisco GLC-SX-MM
Thanks
-b
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
joshua sahala wrote:
drew,
it may or may not be related, but...check the output of 'sh counter
int int [delta]' and look at the qos[1-21][In|Out]lost counters.
i was experiencing various drops due to the default interface (qos)
buffer allocation: basically, all of my traffic was hitting the
A telco (fixed line/mobile carrier) is looking to deploy a centralized
syslog solution for their environment for storing, viewing
and analyzing logs.
A linux-based platform / commercial offering is preferred.
Do you have any such product in mind? Thanks.
Isn't Splunk the defacto answer
+1 for splunk
Jeff Rooney
jtroo...@nexdlevel.com
On Mon, Jan 11, 2010 at 10:23 AM, Dobbins, Roland rdobb...@arbor.net wrote:
On Jan 11, 2010, at 10:27 PM, Felix Nkansah wrote:
A linux-based platform / commercial offering is preferred.
http://www.splunk.com/
On 1/11/2010 10:59 AM, nasir.sha...@bt.com wrote:
Hi,
Due to the global shortage of 73xx routers I am contemplating to use
some old 3550-12Ts as CE routers on a stie where a connection is
required urgently.
It's fine as long as you don't need MPLS to the PE. If you run VRFs
Splunk for sure!
On Jan 11, 2010, at 8:27 AM, Felix Nkansah wrote:
Hi All,
A telco (fixed line/mobile carrier) is looking to deploy a centralized
syslog solution for their environment for storing, viewing
and analyzing logs.
The plan is to have about 1,000+ server and network nodes
Hi
I would second the recomendation of splunk for most of your needs, however
depending on your definition of events notifications capabilities I would
read the fine print about the notification support since I have found it
somewhat lacking.
But of you for instance use it for its strengths,
As it should be :) Its earned it!
On Jan 11, 2010, at 9:47 AM, Simon Lockhart wrote:
A telco (fixed line/mobile carrier) is looking to deploy a centralized
syslog solution for their environment for storing, viewing
and analyzing logs.
A linux-based platform / commercial offering is
Hi Guys.
Thanks so much for the jury's unanimous verdict.
Splunk you voted, and Splunk it is.
On Mon, Jan 11, 2010 at 5:52 PM, Jason LeBlanc jasonlebl...@gmail.comwrote:
As it should be :) Its earned it!
On Jan 11, 2010, at 9:47 AM, Simon Lockhart wrote:
A telco (fixed line/mobile
Nasir,
Be careful about QOS requirements. If your WAN uplink is a subrate link
(i.e. a 1GigE port with an SLAN of 1GigE) you need to perform egress
shaping on that interface, which is not supported on 3550 (or most LAN
switches).
Arie
-Original Message-
From:
So I'm playing around with ipv6 on the ASA. I'm running the latest code
(8.2(1)). And in trying to get traceroutes and pings 'through' the ASA,
I've found that icmp-types are translated to 'english' but using the ipv4
codes. I.e. code 3 for ipv6 is time-exceeded but shows up in config as
We have a 6260 Dslam which terminates its ATM interface on a 7204 ATM for
customers.
One the Dslam we configure a customer like this:
interface ATM1/2
no ip address
dsl subscriber x
dsl profile standard
no atm ilmi-keepalive
atm pvc 0 35 interface ATM0/1 1 36
!
Then on the 7204 the
On Mon, 11 Jan 2010 15:36:30 +0100, you wrote:
What does one need to support Layer-2 QoS on QinQ, newer Juniper EX switches?
Cisco 3750's?
ME-3400E supports copying inner CoS to outer CoS.
-A
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi.
We have a number of Cisco 3550's doing QinQ on a Metro-E network.
I was wondering whether anybody is succesfully copying the 802.1P info from
the Inner Tag, to the Outer Tag.
Sorry, but that's not possible on a 3550-class of switch. Only
standard Catalyst (that I'm aware of) supporting
On Mon, 11 Jan 2010, Keith wrote:
But now I just realized just change the IP address on the ATM
sub-interface on the router and get the customer to renumber to the new
IP. No changing of PVC's needed.
There is another faste interface on the 7204 that would connect to a new
switch which goes
Hi,
On Mon, Jan 11, 2010 at 10:14 PM, Rasheed Khan rasheed...@yahoo.com wrote:
could anybody recommend core router and modules required for below specs
snip
Yeah, sure, send us all a copy of the Request For Tender / Request For
Quote you're responding to, and we'll all have a go.
I mean,
Further follow-up on this for those running SXI3 :
Turns out to be a problem with the parser cache. If you are running parser
config cache interface then the real running config can get out of sync
with what the box thinks is the running config. If you then do a copy run
start things can
I am getting timing slips on a ATM T-1 when the clocking is set to line.
Setting it to internal is of course no better.
I am using a VWIC2-1MFT-T1/E1 on IOS c2800nm-spservicesk9-mz.124-21a.bin.
Links to troubleshooting docs
about slips or suggestions on what is wrong with the config will be
25 matches
Mail list logo