Thanks Oil, my GSR used IOS, that's why cannot check the interface of
Standby RP.
2012/6/5 Oliver Boehmer (oboehmer)
>
> > My GSR have two PRP2, each PRP has three management interface which
> can be
> > configured IP address.
> > But the thing is through show ip interface brief, i just can see
> My GSR have two PRP2, each PRP has three management interface which
can be
> configured IP address.
> But the thing is through show ip interface brief, i just can see three
> Ethernet interface, cannot see six Ethernet.
> Now my issue is if i configure the E0 interface as ip address
> 192.168.1
Hi Folks,
My GSR have two PRP2, each PRP has three management interface which can be
configured IP address.
But the thing is through show ip interface brief, i just can see three
Ethernet interface, cannot see six Ethernet.
Now my issue is if i configure the E0 interface as ip address 192.168.1.1/2
On Mon, Jun 04, 2012 at 20:23:47, Erik Sundberg wrote:
> Subject: [c-nsp] ASA5510 - show vpn-sessiondb l2l - Question
>
> When I do a show vpn-sessiondb l2l for my one peer Encryption and
> hashing alg is repeated 3 times
>
> Encryption : AES256 AES256 AES256 Hashing : SHA1 SHA1 SHA1
>
When I do a show vpn-sessiondb l2l for my one peer Encryption and hashing alg
is repeated 3 times
Encryption : AES256 AES256 AES256 Hashing : SHA1 SHA1 SHA1
The Remote side of the VPN shows the following
Encryption : AES256 Hashing : SHA1
Does anyone know why t
Hi , I am using IGMP v2
Regarding the core switch , its non Cisco switch and i only configured IGMP
quierer to server for the Vlan created for TVs (STBs)
BR,
> Subject: Re: [c-nsp] Multicast Issue
> From: danail.pet...@yahoo.com
> Date: Mon, 4 Jun 2012 13:11:14 +0300
> CC: td_mi...@yahoo.com;
On Mon, Jun 4, 2012 at 2:28 PM, chip wrote:
> So just to follow up on some things:
>
> Log Messages:
> RP/0/RSP1/CPU0:Jun 4 19:20:35.234 : devc-conaux[57]:
> %MGBL-RS232-3-FRAMING_ERROR : The UART driver encountered an framing
> error for Console port
>
> Console Messages:
> Invalid number(-92)
So just to follow up on some things:
Log Messages:
RP/0/RSP1/CPU0:Jun 4 19:20:35.234 : devc-conaux[57]:
%MGBL-RS232-3-FRAMING_ERROR : The UART driver encountered an framing
error for Console port
Console Messages:
Invalid number(-92) sent as ASCII value to command-line process from
VTY/TTY, ref
Hi all,
Just installed some brand spanking new RSP440's into a couple of
ASR9006's and having a helluva time with the console connection.
Trying to setup the intial root user account and password it seems to
ignore input for a few minutes, then randomly works. After you do
finally get into IOSX
When I do a show vpn-sessiondb l2l for my one peer Encryption and hashing alg
is repeated 3 times
Encryption : AES256 AES256 AES256 Hashing : SHA1 SHA1 SHA1
The Remote side of the VPN shows the following
Encryption : AES256 Hashing : SHA1
Does anyone know why t
Just make REAL sure the firmware on the SIPs matches the firmware on
the SPAs. Super bad juju if they don't match. Looks like you're
already using something newer than 15.1, so you're pretty good there.
No experience with tunnel support on them so no comments regarding
that.
Good luck on your de
Hi there,
A few questions:
1. What IGMP version is used?
2. What kind is the platform - 65/76 and if so - what modules are used.
If this is an IGMPv3 - there is a well known issue with it. I should search a
little for that but S,G channels are not properly snooped by the switch, which
results
Hi All,
Can anyone confirm whether an WS-X6348-RJ-45 (48 Port 10/100 line
card), with an WS-F6K-48-AF (802.3af POE Injector) together will
provide an working PoE system for SNOM telephones?
FYI:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_10826.html
I am y
Hi all , thanks for all replies
Seemingly after i connected a laptop with wireshark , there seem a lot of
broadcast which reach as well unused ports
Bandwidth supposed to be 5M for each stream requested , so is it possibly CPE ?
We have configured IGMP quierer on the Core Switch
BR,
Date: Sat,
14 matches
Mail list logo