Dear Ryan
Thanks for the reply.
I have three syslog servers as mentioned below, first two syslog servers which
are in management segment are working regardless of the order in the config.
Only the syslog server 3 which is in inside segment is not working either at
number 2 position or
I don't see any instances of spanning tree running for various efp's I've
created in my ME3600.
Is there something different with spanning tree and the Me3600x that is much
different than older cisco switches ?
voice-3600#sh spanning-tree interface g0/4 efp 336
no spanning tree info
On 20 December 2012 02:54, Harald Kapper h...@kapper.net wrote:
Hi,
we're currently on 7206VXR with NPE-G2 and NPE-G1 on our network.
[...]
I'd be happy to receive recommendations whether to go the ASR-1000 route or
skip this and go directoy to 760x-systems (using which RSP/SUP?).
The
On Wed, Dec 26, 2012 at 11:32:15, Andrey Petrenko wrote:
Subject: [c-nsp] Cisco ASA 5512-x
hello.Does cisco Asa 5512-x security plus support high-availability
support (Active/Active, Active/Support). On this page:
http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.h
many thanks Ryan
--
With best regards,
Andrey 'sshd' Petrenko
xmmp\gtalk: andy.petrenko at gmail.com
skype: andy.petrenko
web: http://sshd.by
On 26.12.2012, at 19:38, Ryan West rw...@zyedge.com wrote:
On Wed, Dec 26, 2012 at 11:32:15, Andrey Petrenko wrote:
Subject: [c-nsp] Cisco ASA 5512-x
Howdy. I am guessing this answer is no, but thought I would check with the
experts here.
I am replacing a few standalone ASA devices with a new Active/Standby failover
pair. I have a good number of services on here and I am trying to keep as many
of them as possible on public IP's not
On Wed, Dec 26, 2012 at 13:57:53, Blake Pfankuch wrote:
Subject: [c-nsp] Anyconnect ASA 5550
Int gi 0/1
Ip address 10.10.10.11 255.255.255.0 standby 10.10.10.12 Nameif
outside Secu 0
Without changing the actual interface IP, I cannot have my Anyconnect
clients connect to 10.10.10.15?
On 12/26/2012 3:05 PM, Ryan West wrote:
On Wed, Dec 26, 2012 at 13:57:53, Blake Pfankuch wrote:
Subject: [c-nsp] Anyconnect ASA 5550
Int gi 0/1
Ip address 10.10.10.11 255.255.255.0 standby 10.10.10.12 Nameif
outside Secu 0
Without changing the actual interface IP, I cannot have my
Hi Aaron
See:
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.2_4_S/configuration/guide/swevc.html#wp1002521
•When STP mode is PVST+ or PVRST, EFP information is not passed to the
protocol. EVC only supports only MSTP.
We're running Rapid-PVST but it only
Got a used 7206 I am trying to bring back to life. It seems to be able to read
the PCMCIA card in the slot okay, but after a power cycle it loses config and
claims the NVRAM is corrupt, throwing me to rommon. From there I can tell it to
boot from disk0 and it boots alright from the PCMCIA card
On 12/26/2012 2:09 PM, Joseph Mays wrote:
Got a used 7206 I am trying to bring back to life. It seems to be able to read
the PCMCIA card in the slot okay, but after a power cycle it loses config and
claims the NVRAM is corrupt, throwing me to rommon. From there I can tell it to
boot from
Got a used 7206
I should have said, 7206VXR - NPE400.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
On 12/26/12 2:09 PM, Joseph Mays wrote:
Got a used 7206 I am trying to bring back to life. It seems to be able to
read the PCMCIA card in the slot okay, but after a power cycle it loses
config and claims the NVRAM is corrupt, throwing me to rommon. From there I
can tell it to boot from
I had a couple that did that and I was able to fix one of them by
replacing the battery on the I/O card.
The I/O Board has been sitting on a shelf for... a long time anyway. So that
makes sense. I'll replace the battery.
___
cisco-nsp mailing list
0n Thu, Dec 27, 2012 at 09:09:48AM +1100, Joseph Mays wrote:
Got a used 7206 I am trying to bring back to life. It seems to be able to
read the PCMCIA card in the slot okay, but after a power cycle it loses
config and claims the NVRAM is corrupt, throwing me to rommon. From there
15 matches
Mail list logo