It seems to me, that upgrading ENCS to 3.7.1 solved this issue...
On Tue, 13 Mar 2018, BALLA Attila wrote:
Hello,
I have just received an ENCS5412 for testing, I have installed an ISRv and
connected the ENCS to an external MPLS router.
The routing and LDP is working fine between them
Hello,
I have just received an ENCS5412 for testing, I have installed an ISRv
and connected the ENCS to an external MPLS router.
The routing and LDP is working fine between them, but the baby giant
frames are dropped somewhere: it means that 1500-byte long packets
with two labels and DF-bit
Hello,
We had a similar sitatuation. We have two n7k in a vpc domain with vdc
feature as well. The upgrade of the first switch was without any issue,
but we upgraded the second one too, and the M1 card failed to boot, this
caused that VDC couldn't start... After removing the failed card the
Hello,
I met an interesting issue: there is a Cisco 7200 NPE-G2 with
12.4(24)T7, this router terminates some broadband users, we applied
shaping on the virtual-template and we surprised: shaping was not working.
We upgraded (downgraded?) to 12.2(33)SRE6 and the shaping was working
properly,
Hello,
I would like to know if mpls bgp forward is supported on ISR G2
platform, especially on Dialer interface. It was working in GNS3 with
C7200, but in the real life it could be different.
The goal is set up an MPLS/VPN on several ADSL CPE (this would be an ISR
G2 router), I'd like to
Hello,
we have an asr1000 acts as an LNS. Two weeks ago we upgraded it to XNF2,
but the packet forwarding was not working at half of the pppoe sessions.
We tested it with ping, the cpe received the icmp packet, and it sent the
icmp replay, but the asr1000 was unable to handle it, so the
what about asr9k with low-queue cards? its price and performance is
reasonable as well.
br, A.
On Wed, 28 Jul 2010, Chris Hale wrote:
Hello,
Looking for options to our next upgrade from our 7200VXR platform.
Someone suggested 7600 and the WS-X6148A-GE-TX cards with a
SUP720-3BXL. We're
Hi,
you should use hierarchical QoS. First of all you should shape the
output traffic down to the upstream speed, then you can use the llq inside
the shaped class:
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800b2d29.shtml
BR, A.
On Tue, 24 Mar 2009, Ivan
I had the same issue, it must be CSCsh99351, it is fixed in 12.2(18)SXF11.
You should use udld on ce uplinks only.
BR, A.
On Thu, 19 Feb 2009, Ruben Montes (Europe) wrote:
Hi,
We have configured a new EoMPLS VC. After 3 or 5 pings, UDLD
err-disables one of the interfaces. We are using port
box, do you mean that I must
explicitly disable udld in the interfaces on the PE switches where I
have created the VC with x-connect?
Thanks in advance,
Ruben
-Original Message-
From: BALLA Attila [mailto:a...@eik.bme.hu]
Sent: jueves, 19 de febrero de 2009 17:00
To: Ruben Montes (Europe
10 matches
Mail list logo